A horizontal Venturi meter with a throat diameter of 150 mm is connected a pipe of diameter of 250 mm to measure the discharge in the pipe. The pressures just upstream of the connection and at the throat were found to be 140 kPa and 80 kPa, respectively. Determine the flow rate in the pipe. Take the coefficient of discharge for the Venturi meter as 0.98 and T = 55°C. (Expected answer range: 0.190 m²ls

A horizontal Venturi meter with a throat diameter of 150 mm is connected a pipe of diameter of 250 mm to measure the discharge in the pipe. The pressures just upstream of the connection and at the throat were found to be 140 kPa and 80 kPa, respectively. Determine the flow rate in the pipe. Take the coefficient of discharge for the Venturi meter as 0.98 and T = 55°C. (Expected answer range: 0.190 m²ls

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A liquid whose specific gravity is 2.0, is flowing in a 150mm diameter pipe. The total head at a given point was found to be 17.5m. That point is 3m above the datum and the pressure in the pipe is 65.6KPA. Compute the discharge in that point of the pipe. A) No Answer among the choices В 24.31 L/s C) 19.28 L/s D 29.05 L/s E 32.56 L/s
A liquid whose specific gravity is 2.0, is flowing in a 150mm diameter pipe. The total head at a given point was found to be 17.5m. That point is 3m above the datum and the pressure in the pipe is 65.6KPA. Compute the discharge in that point of the pipe. A 24.31 L/s B) 19.28 L/s C) 29.05 L/s D No Answer among the choices E 32.56 L/s
A liquid whose specific gravity is 2.0, is flowing in a 50mm diameter pipe. The total head at a given point was found to be 17.5m. That point is 3m above the datum and the pressure in the pipe is 65.6KPA. Compute the discharge in that point of the pipe. (A 24.31 L/s B) 29.05 L/s (c) No Answer among the choices 32.56 L/s E) 19.28 L/s
A cylindrical tank with vertical axis contains water. A 50 mm orifice is located at the side 0.60 m above the bottom of the tank and 1.50 m directly above the orifice is another orifice 75mm diameter. Cv is 0.98 and C is 0.61 for both orifices. Determine the: show complete solution thumbs up guaranteeda. h1 in metersb. Discharge in the lower orifice in lit/secc. Total discharge from the 2 orifices in lit/sec
Water flows through a 300mm diameter pipe at a velocity Of 3.00 m/s. Determine the weight flow rate in N/s. Do not write the unit. You will only jnput the numerical answer in the space provided. Unit of the Correct Answer: N/s O 9810.000 O 2,080.284 O 8829.000 1202.284
In a test to determine the discharge coefficient of a 50 mm x 12.5 mm horizontal venturi meter, the total weight of water passing the meter in 5 min. was 340 kg. A mercury differential gage connected to the inlet and throat of the meter showed an average mercury difference during thatrime or 364 mma. Compute the velocity of the throat (m/s)b. Compute the theoretical discharge (m3/s)c. Compute the meter coefficient.
A Venturi meter having a throat diameter of 150mm is installed in a 300mm diameter horizontal pipeline carrying oil (S = 0.80). A mercury U-tube connected as shown shows a difference in height of mercury columns of 200mm, the remainder of the tube being filled with oil. If the meter coefficient is 0.95, determine the following: a.)The theoretical discharge (m3/s). Consider HL = 0. b.)The actual discharge (m3/s). Consider HL c.)The head loss (m) between the inlet and the throat.
100mmgl 个一 680mm 320 mm I320m 300mm A H2O A vertical venturi meter 100mm diameter is installed in a 300mm diameter vertical pipe as shown. The flow is upward. If the specific gravity of the mercury at the bottom part of the manometer is 13.6, determine the a) Discharge neglecting head loss, b) Discharge if head loss from point 1 to point 2 is 500mm, and c) Coefficient of discharge (This is a multiple answer question. You must have 3 selected choices since there are 3 required answers in the problem) A No answer among the choices in question A B No answer among the choices in question C C = 0.819 D No answer among the choices in question B E) Q = 70.3 L/s Qt = 86.2 L/s G) Qt = 65.8 L/s H) Q = 86.2 L/s Q = 65.8 L/s C = 0.936 к) с30.753 Qt = 70.3 L/s M) C = 0.668 N) Qt = 57.6 L/s o Q = 57.6 L/s
3)a: For the figure below, find the discharge in pipe, neglect the minor losses only. (e-0.001m, D-Im, L-600m, u-1.307*10 m/sec). LAS 5m 2 1.96 D. b: In a pipe of 300 mm diameter the maximum velocity of the flow is found to be 2 m/s. If the flow in the pipe is laminar, determine: 1) The average velocity and the radius at which having the same velocity magnitude as the average velocity. 2) The velocity at 50 mm from the wall of the pipe. 5964 11.62
Installed is a venturi meter on a pipe 30 cm diameter in which the maximum flow is 2.7 cum of water in one minute. The throat is 15 cm in diameter. Compute the theoretical discharge that would be passing through the meter when the differetial manometer is as shown. Calculate also the discharge coefficient, C.
A venturi meter with a throat diameter of 100 mm is fitted in the inclined pipeline of 200 mm diameter with oil of specific gravity 0.88 flowing upwards. The venturi meter coefficient is 0.96. Two pressure gauges are fitted at tapping points, one at the throat reads the vacuum pressure of 40 cm of mercury and the other in the inlet pipe 320 mm below the throat is 20.231 N/cm2. If the loss of head in the main and throat is 0.35 times the kinetic head of the pipe, determine2.1 the volume flow rate of oil through the pipe2.2 the difference in level in the two limbs of the mercury manometer if it is connected to the tapping points and connecting pipes are filled with the same oil
a. Determine the velocity of flow in the pipe in m/s. b. Determine the discharge Q in m^3/s. c. How many meters above the center of the pipe will water stand in piezometer tube 3? d.