A gas expands in a frictionless piston-cylinder arrangement. The expansion process is very slow, and is resisted by an ambient pressure of 100 kPa. During the expansion process, the pressure of the system (gas) remains constant at 300 kPa. The change in volume of the gas is 0.01 m3. The maximum amount of work that could be utilized from the above process is.

A gas expands in a frictionless piston-cylinder arrangement. The expansion process is very slow, and is resisted by an ambient pressure of 100 kPa. During the expansion process, the pressure of the system (gas) remains constant at 300 kPa. The change in volume of the gas is 0.01 m3. The maximum amount of work that could be utilized from the above process is.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A piston-cylinder device initially contains CO2 at 200 kPa and 400°C and the total enclosed volume is 300 litres. Due to heat loss, the piston moves downwards to a position where it sits on a pair of stoppers and its final enclosed volume is 150 litres. Further heat loss leads to the pressure being reduced to 160kPa. Workout 1) the final temperature, 2) the total work done by CO2 and 3) the total heat transferred to CO2. Also make some comments on the result of heat and create a schematic p-v diagram of the process. The following assumptions are to be made: CO2 is a perfect gas and its molecular mass is 44kg/kmol. The ratio of specific heat capacities, γ (gamma) is 1.3 The volume occupied by the stoppers is to be ignored. There is no leakage in the system There is no friction between the cylinder and piston walls and the piston moved slowly at the same speed therefore, no acceleration. For the conversion from Celsius to Kelvin, use 273 Use 8314.5 J/kmol.K for the universal gas…
Water, assumed to be a perfect liquid, has a density of 1000 kg/m3 and a specific heatof 4184 J/kgK. The water undergoes an adiabatic, frictionless process in which itspressure is raised from 170 kPa to 850 kPa. Find the following:(a) the change of specific internal energy (J/kg)(b) the change in temperature (K)
A frictionless piston cylinder device initially contains 200L of saturated liquidrefrigerated R134a. The piston is free to move, and its mass is such that it maintainsa pressure of 900 kPa on the refrigerant. The refrigerant is now heated until itstemperature rises to 70 oC. Calculate the work done in the process.
The valve connected to a 450-liter insulated tank of air at 250 kPa and 50̊C is opened,allowing the gas to escape until its pressure drops to 120 kPa. An electric heater insidethe tank maintains the temperature at 50̊C. Using variable specific heats, Determine thefollowing:a) The mass of air withdrawn (kg)b) The energy input to the resistor (kJ)
the initial mass (m1) in (kg) is A rigid 0.15 m³ tank contains air at 0.8 MPa, 200°C. A valve on the tank is now opened and air flows out until the pressure drops to 100 kPa. During this process, heat is transferred between tank and surrounding, such that when the valve is closed, the temperature inside the tank is 60°C. me valve Tank Air, V-0.15 m² P₁=0.8 MPa, T₁= 200 C P₂ = 100 kPa > T₂ = 60°C
1. A scuba tank contains 1.5 kg of air. The air in the tank is initially at 15°C. The tank is left near an engine exhaust line. and the tank's pressure doubles. Determine (a) the final temperature; (b) the change in internal energy; (c) the heat added. (d) AS
Initially, 200 L of saturated vapor refrigerant-134a in a piston. The piston is free to move, and its mass is such that it maintains a pressure of 900 kPa on the refrigerant. The refrigerant is now heated until its temperature rises to 60°C. The work done during this process is Select one: 73.55 kJ 37.55 kJ 27.49 kJ O 72.49 kJ
I need the answer at 20 minute