A double-jet Pelton turbine generates 3750 kw when running at 375 rpm. The applied head is 200 m and the wheel diameter is 1.45 m. The bucket angle is 15° and C, = 0.97 for each nozzle. Answer the followings:

A double-jet Pelton turbine generates 3750 kw when running at 375 rpm. The applied head is 200 m and the wheel diameter is 1.45 m. The bucket angle is 15° and C, = 0.97 for each nozzle. Answer the followings:

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Answer The following A twin jet Pelton wheel is required to generate 7500 KW when the available head at a nozzle is 400 m. Assuming generator efficiency of 95% overall wheel efficiency of 80% , coefficient of velocity as 0.98, speed ratio as 0.46, reduction in relative velocity while passing through bucket as 15% and taking that the jet is deflected through 165 by the bucket, the diameter of each jet O 13.69 cm 18.84 cm 20.21 cm 10.54 cm
A single jet Pelton wheel is required to drive a generator to develop 10Mw. The available head at the nozzle is 762m. Assuming electric generator efficiency is 95%, Pelton wheel efficiency 87%, coefficient of velocity 0.97, mean bucket velocity 0.46 of the jet velocity, outlet bucket angle 15° and the friction of bucket reduces the relative velocity by 15%, find (a) the flow rate of water through turbine (b) the diameter of the jet (c) the force exerted by the jet to the nozzle.
3. A 90% efficient Francis turbine running at 100 rpm discharges 6m * 3/s of water. The inner runner radius is 1.8 m and the outer periphery of the wheel has a radius of 2.5 m. The blade height is 50 cm. The blade angle beta_{1} is 80 degrees and beta_{2} is 160 degrees Find the vane angle, torque, and the power from the turbine
1- A double jet of Pelton turbine driven by double nozzles to produce (4250 kw) to the shaft of an electrical generator when running at (400 rpm). The height of (180 m). wheel diameter is (1450 mm). The velocity of relative= 0.9 of jet velocity. If the angle of bucket is (165'), determine: a) Hydraulic efficiency b) Diameter of the jet
Using data given below, determine the main dimensions and blade angles of a Francis turbine. Net head=65 m, speed= 700 rpm, BHP= 400. Actual hydraulic efficiency3D 94%, overall efficiency= 85%, flow ratio= 0.18, wheel width at inlet/ wheel diameter at inlet=0.1, inner diameter/ outer diameter= 0.5. Assuming constant velocity of flow and radial discharge. Neglect area blocked by blades. Vane angle at inlet: 27° 39 33° 53 41° 82 O 52° 56
A twin jet Pelton wheel is required to generate 7500 KW when the available head at a nozzle is 400 m. Assuming generator efficiency of 95% overall wheel efficiency of 80% , coefficient of velocity as 0.98, speed ratio as 0.46, reduction in relative velocity while passing through bucket as 15% and taking that the jet is deflected through 165 by the bucket, total flow is 2516 lit/sec O 3452 lit/sec 17834 lit/sec 11987 lit/sec
This course EHide block A centrifugal pump with the following impeller dimensions is used to pump water. The pump is running at 1000 rpm. The ideal head rise through the pump is 190 ft. b2 Poz 72 by The parameters of the impeller are as follows: r2= 9in, b2=3in, B2= 31° Take g= 9.81 m/s23 32.2 ft/s2 pw = 998 kg/m3 = 1.94 Slug/ft. Determine the theoretical flow rate in gpm Choose.. Determine the theoretical Power shaft in (hP) Choose...
A single jet Pelton turbine operates a 10,000 KW generator. The generator efficiency is 93%, turbine efficiency is 86%, turbine head is 350 m, coefficient of nozzle velocity is 0.98, speed ratio is 0.46 and the jet ratio is approximately 12. Find the size of the jet, mear diameter of runner, synchronous speed, specific speed of turbine and bucket dimensions.
A Kaplan turbine working under a head of 43 m deve-lops 15,400 B.H.P. The dia of theboss is 0"3 times the dia ofrunner. Determine the speed and dia of runner, if speed ratio is2, flow ratio as 0-65 and overall efficiency as 91%.
A twin jet Pelton wheel is required to generate 7500 KW when the available head at a nozzle is 400 m. Assuming generator efficiency of 95% overall wheel efficiency of 80% , coefficient of velocity as 0.98, speed ratio as 0.46, reduction in relative velocity while passing through bucket as 15% and taking that the jet is deflected through 165 by the bucket, the corresponding mean diameter of runner 1.557 m 2.123 m 3.543 m 4.219 m
A Pelton wheel develops 70 kW under a head of 60 m of water. It rotates 400 rpm. Overall efficiency is 80%. Find the discharge rate in m³/s. Use the equation below, where P is power of the turbine shaft and no is the overall efficiency, where specific weight of water is is 9.80 kN/m³ no P YQH A generator is driven by a small, single-jet Pelton turbine designed to have a power specific speed sp 0.20. The effective head at nozzle inlet is 200 m and the nozzle velocity coefficient is 0.985. The runner rotates at 880 rev/min, The turbine overall efficiency is 80%. Find (a) the power delivered by the shaft of the turbine and (b) find the power delivered by the water to the turbine. where density of water is 1000 kg/m³ and g is 9.80 m/s². Use Stup Ω P/p (gHE)* Overall efficiency ne and Power developed at turbine shaft hydraulic power P YQH
QUESTION 1:A centrifugal pump consists out of an impeller, diffuser and casing and is powered by 300kW (shaft power) and rotates at 96.3 rad/s. The flow rate generated by the machine is54.7 Kilo-litres/min. The impeller blade inlet angle and width is 23° and 180 mmrespectively. The blades occupy 12% of the impeller area and the water is assumed toenter the impeller radially. Suction and delivery pipes are equal in size.Determine:1.1The impeller inlet (i) diameter and inlet blade velocity.(Hint - Substitution: ln in terms of D and U, in terms of D, both sub into Tan of Blade inlet angle,only unknown is then solving for Dz)1.2.If the pump has a mechanical efficiency of 80%, calculate the blade velocity atoutlet (U.) and outlet whirl velocity Vw.. Assume the blade exit angle equal to theguide vane angle. (Hint - Substitution: Write Vw in terms of U, sub in Euler equation onlyunknown then is solve for Vwo)1 3Impeller outer diameter.1.4,If the flow through velocity is consistent through the…