A diaphragm pressure transducer uses the deflection of a circular membrane to indicate the pressure. The membrane is composed of a steel alloy with an elastic modulus of E = 30,000,000 psi, Poisson's ratio of µ = 0.33, and density of p = 0.28 Ibm/in³. The diaphragm has a radius of a = 0.625 in. and a thickness of t = 0.125 in. The transducer has a 10 psi maximum reading. a. What is the resonant frequency for the diaphragm? b. Consider frequencies well below resonance. If you would like to know the pressure to within 0.25% of full scale, how accurately must the membrane deflection be measured (in inches)? Neglect the uncertainties in the dimensions and material properties of the diaphragm.

A diaphragm pressure transducer uses the deflection of a circular membrane to indicate the pressure. The membrane is composed of a steel alloy with an elastic modulus of E = 30,000,000 psi, Poisson's ratio of µ = 0.33, and density of p = 0.28 Ibm/in³. The diaphragm has a radius of a = 0.625 in. and a thickness of t = 0.125 in. The transducer has a 10 psi maximum reading. a. What is the resonant frequency for the diaphragm? b. Consider frequencies well below resonance. If you would like to know the pressure to within 0.25% of full scale, how accurately must the membrane deflection be measured (in inches)? Neglect the uncertainties in the dimensions and material properties of the diaphragm.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The induced nominal stress in a machine member is 33 N/mmn and the value of maximum stress near the irregularities is 59N/mm2, the value of stress concentration factor is SCF, K =
SM1007 THIN CYLINDER The pressure vessel shown.above is made from 2 mm thick steel plate. A pressure of 1 MN/m is applied to the cylinder with a length of 0.4 m and an internal diameter of 0.4 m. Young's modulus is E = 220 GN/m2 and Poisson's ratio is v = 0.3 .
Determine homogeneous equation by applying Leibnitz Mclaurin method xy"+y'+2xy=1 show all working
How Vt=Vr × sin (70°) ? i need explanation regarding it. Please provide a solution within 10-20min
b(x) is a (nonzero) constant along the entire length of the bar. A, E -- constant L b- constant » b(x) d a. Solve for R(x) as a piecewise function of x b. Solve for o(x) c. Solve for ɛ(x) d. Solve for u(x) e. Plot R(x) and u(x) (by hand is fine) on two separate plots arranged vertically so that the x-axes line up. Label values on the graph.
Vessels A and B contain water under pressures of 276 kPa and 138 kPa, respectively. What is the deflection height of the mercury, h, in the differential manometer gauge in Figure 5? A Water h Mercury. X Y D C Figure 5 4.877 m B -3.048 m
Working from first principles find the interference fit per metre of diameter if the radial pressure owing to this at the common surface of a compound tube is 90 MN/m2, the inner and outer diameters of the tube being 100 mm and 250 mm respectively and the common diameter being 200 mm. The two tubes are made of the same material, for which E = 200 GN/m². If the outside diameter of the inner tube is originally 200 mm, what will be the original inside diameter of the outer tube for the above conditions to apply when compound?
Q.2 A thin cylindrical shell, 1.5 m internal diameter, 2.4 m long, internal volume 4-23 m³, plates 25 mm thick, is under internal pressure of 1 N/mm². Assuming the end plates are rigid, find the changes in length, diameter, and volume. E=206,000 N/mm²; v=0-267. (0.081 mm; 0.19 mm; 0.00124 m³.)
4 A water pipe is to beconstructed with a 207 grade in the novth divection and a 10% grade in the cast divection. Deteomint the angle & reguived in the wafer pipe tor the turn from novth to east. Est 5 Find the length and divection for (uxv) X(vxu) 19 for the tollowtings O u=zi+3j , v= -i+j @ u=2i-2j ++k vーit)-2K ® u= irj-K, v=0 @ u= -gi -2j-4K, v= 2i+2j+k O u= i-tjtk, v= i+j+2k Find @the area of the triange determined by the point P,a & R. Othe unit vector perpendicular toplane PaR. O PU, 1,1), Q(2,1,3), R(3,-1,1) @ P (2,-2, 1) , Q (3,-1,2), R(,-1,1) O P(-2,2,0), Q(0,1,-1) , R (-1,2,-2) A Find the volumo of the parallelopiped Cbon) dek mincl by U,v, ond w. u= 2i , v=2j, w= 2k O uz i-j k, v= 2itj-2K, w= -i+2j-k ® u= 2i+j, v=zi-j+k, w= i+2K i+j-2K , v=-i-k, W= zi+4j -2K 8 Let u= 5i-j+k, v=j-5k, w= -isi+3j-3k. Which verdns. if are @ perpendicular ® paralled. T Find the aveas ☺ All,o), B(0,1),<(-l,0), D(0,-1) A (010) , TS (7.3) , e(9,8), D(2,5) A(-12) , B (2,0) , c(7i1) ,D(4,3) of the…
Q.2 A thin cylindrical shell, 1.5 m internal diameter, 2-4 m long, internal volume 4-23 m³, plates 25 mm thick, is under internal pressure of 1 N/mm². Assuming the end plates are rigid, find the changes in length, diameter, and volume. E=206,000 N/mm²; v=0.267.00 ART
A FEM analysis was used to analyse the safety of a mechanical component made by an average steel (E = 2 × 105 MPa, v = 0.25, o, = 600 MPa). For a given loading scenario, the stress tensor E in a critical point is: Try -81 -186 Try Oyy 186 -37 -319 Calculate the von Mises equivalent stress oyM and indicate whether or not the stress condition is safe with respect to the related failure criterion. OVM = MPa Is the stress condition safe with respect to the related failure criterion: Oa. Yes Ob. No
The induced nominal stress in a machine member is 28 N/mm? and the value of maximum stress near the irregularities is 61N/mm?, the value of stress concentration factor is SCF, K = Bearings are designated by a standard number internationally, the first digit in the bearing number 6409 represents type of the bearing. Select one: O True O False The value of curvature correction factor k; will be . if the spring index is 6. O a. 1.33 O b. 1.08 O c.0.,92 O d. 4.00 The figure below shows the components of normal forces, the value of radial force on the gear wheel due to a tangential force of 642 N is . N, Take pressure angle as 1420. Pitch point P. Gear driven 02 The radial force is