A DC motor has the following specifications: 10 hp, 37.5 A, 230 V; flux / pole = 0.01 Wb, number of poles = 4, number of conductors = 666, number of parallel paths = 2. Armature resistance = 0.2670. The armature reaction is negligible and rotational losses are 600W. The motor operates from a 230V DC supply. If the motor runs at 1000 rpm, the output torque produced in (in Nm) is_

A DC motor has the following specifications: 10 hp, 37.5 A, 230 V; flux / pole = 0.01 Wb, number of poles = 4, number of conductors = 666, number of parallel paths = 2. Armature resistance = 0.2670. The armature reaction is negligible and rotational losses are 600W. The motor operates from a 230V DC supply. If the motor runs at 1000 rpm, the output torque produced in (in Nm) is_

Electric Motor Control

10th Edition

ISBN:9781133702818

Author:Herman

Publisher:Herman

Chapter51: Electric And Electronic Braking

Section: Chapter Questions

Problem 2SQ: Differentiate between the AC and DC magnetic fields applied to an induction motor stator.

See similar textbooks

Similar questions

Armature winding of an alternator can also be described as
1. The operation of Commutator in DC Motor is * O a) to convert dc to ac O b) to convert ac to dc O c) to convert fixed dc to variable dc O reverse the current direction in the rotating windings each half turn
A dc machine has hysteresis loss of 300 W and an eddy current loss of 200 W when running at 1200 rpm. At what speed will the total core losses be a quarter of the original if the flux is to be twice as the original.
A field excitation of 20 A in a certain alternator results in an armature current of 400 A in short circuit and a terminal voltage of 2000 V on open circuit. The magnitude of the internal voltage drop within the machine at a load current of 200 A is
The strength of the rotating magnetic field in a three phase induction motor is equal to times the flux produce ...... ....... in one of the phase windings. 1.25 1 O 1.5
What are the rotating parts on d.c machine. commutator segments O brushes O inter-pole O pole shoe
The maximum speed of an alternator working at 60 Hz is possible when the number of poles of the machine is ........ a. 4 b. 5 c. 3 d. 2
A DC shunt generator delivers 45 A at a terminal voltage of 220 V. The armature and the shunt field resistances are 0.01 2 and 44N respectively. The stray losses are 375 W. What is percentage efficiency of the DC generator
Differentiate between the AC and DC magnetic fields applied to an induction motor stator.
An 8-pole DC machine has a simplex wave-wound armature containing 200 coils of 10 turns each. The resistance of each turn is 0.01 Ω. The flux per pole is 0.004 Wb. what is the internal resistance of the armature in ohms?
Is this armature winding a progressive or a retro-progressive winding? W N Select one: 2 B 4' O a. Both O b. Progressive OC. Neither O d. Retro-progressive B S
A DC generator has an armature emf of 500 V when useful flux/pole is 20 mWb, and a speed of 625 rpm. The generated emf at a speed of 125 rpm and same flux is