A curve of 100 m radius (e=8.0 % and fs=0.14) is located at a section of an existing rural highway which restricts the safe speed to 55 % of the design speed causing a high accident rate. To reduce the accident rate, a new curve is to be designed. Determine the minimum radius of this curve if the safe speed should be increased to the design speed. Assume the same values of e and fs.

A curve of 100 m radius (e=8.0 % and fs=0.14) is located at a section of an existing rural highway which restricts the safe speed to 55 % of the design speed causing a high accident rate. To reduce the accident rate, a new curve is to be designed. Determine the minimum radius of this curve if the safe speed should be increased to the design speed. Assume the same values of e and fs.

Traffic and Highway Engineering

5th Edition

ISBN:9781305156241

Author:Garber, Nicholas J.

Publisher:Garber, Nicholas J.

Chapter15: Geometric Design Of Highway Facilities

Section: Chapter Questions

Problem 25P

See similar textbooks

Similar questions

Problem 5 An existing horizontal curve on a highway has a radius of 465 ft, which restricts the posted speed limit to only 61.5% of the design speed on this section of the highway. If the curve is to be improved, so that its posted speed will be the design speed of the highway, determine the minimum radius of the new curve. Assume that the rate of superelevation is 0.08 for both the existing curve and the new curve to be designed and f,=0.16 for 40 mph, 0.14 for 50 mph, 0.12 for 60 mph, and 0.10 for 70 mph.
The design speed of a highway is 80 km/h. There is a horizontal curve of radius 200 m in a certain locality. What should be the superelevation required to maintain this design speed? If the maximum superelevation of 0-07 is not to be exceeded, what should be the maximum allowable speed on this curve ? Also determine the extra widening required and length of transition curve using the following data: Length of wheel base of the largest vehicle = 6-1 m Pavement width=7-2 m Number of lanes = 2 Rate of introduction of superelevation = 1 in 200 Type of terrain Plain Safe limit of coefficient of friction = 0.15
A curve of radius 76 m and e = 0.08 is located at a section of an existing rural highway, which restricts the safe speed at this section of the highway to 50% of the design speed. This drastic reduction of safe speed resulted in a high crash rate at this section. To reduce the crash rate, a new alignment is to be designed with a horizontal curve. Determine the minimum radius of this curve if the safe speed should be increased to the design speed of the highway. Assume fs = 0.17 for the existing curve. The new curve is to be designed with the same superelevation
A. A curving roadway has a curve with a radius of 640 m. The superelevation has been set at 5% and the coefficient of side friction is found to be 0.20. In addition, the traffic engineer has designed the speed as 125 km/hr, and the angle is 74°. i. Explain whether this speed will provide a safe vehicle operation or not? ii. Find middle ordinate iii. Curve length iii. Tangent Length v. Sketch the curve elements with all values B. Describe the major elements that geometric design of highways deals with? (write between 100-150 words)
3. A curve of radius 250 ft and e= 0.08 is located at a section of an existing rural highway, which restricts the safe speed at this section of the highway to 50% of the design speed. This drastic reduction of safe speed resulted in a high crash rate at this section. To reduce the crash rate, a new alignment is to be designed with a horizontal curve. Determine the minimum radius of this curve if the safe speed should be increased to the design speed of the highway. Assume fs=0.17 for the existing curve, and the new curve is to be designed with e = 08.?
A curve of radius 250 ft and e = 0.08 is located at a section of an existing rural highway, which restricts the safe speed at this section of the highway to 50% of the design speed. This drastic reduction of safe speed resulted in a high accident rate at this section. To reduce the accident rate, a new alignment is to be designed with a horizontal curve. Determine the minimum radius of this curve if the safe speed should be increased to the design speed of the highway. Assume fs = 0.17 for the existing curve, and the new curve is to be designed with e = 0.08.
Traffic Engineering vertical curve problem. Solve the d,e,f part
PROBLEM 7 A +2 percent grade on an arterial highway intersects with a -1 percent grade at station 535 + 24.25 at an elevation of 300 ft. If the design speed of the highway is 65 mi/h, determine the stations and elevations of the initial point of vertical curve (PVC), the final point of vertical curve (PVT), the high point, and the elevation of each 100-ft station.
A highway reconstruction project is being undertaken to reduce crash rates. The reconstruction involves a major realignment of the highway such that a design speed of 100km/h attained. At one point on the highway, a 245m equal-tangent crest vertical curve exists. Measurements show that at 0+107.3 stations from the PVC, the vertical curve offset is 1 meter. Assess the adequacy of this existing curve in light of the reconstruction design speed of 100km/h and if the existing curve is inadequate, compute a satisifactory curve length.
A curve is to be designed to have a design speed of 80kph. If there is no superelevation, what would be a safe radius for the curve? If the curve is designed with a superelevation of on an urban setting at max e% what would the minimum radius of curvature?
A highway reconstruction project is being undertaken to reduce accident rates. The reconstruction involves a major realignment of the highway such that a 50 mph design speed is attained. At one point on the highway, an 800 ft equal tangent crest vertical curve exists. Measurements show that at 3-52 stations from the PVC, the vertical curve offset is 3 ft. Assess the adequacy of this existing curve in light of the reconstruction design speed of 60 mph and, if the existing curve is inadequate, compute an adequate curve length.
Question 2 The maximum speed of a vehicle on a 4º curve having arc length 30 m is limited to 60 kmph. Calculate the psychological widening required on the curve.