A container made of steel, which has a coefficient of linear expansion  11 ✕ 10−6 (°C)−1, has a volume of 46.0 gallons. The container is filled to the top with gasoline, which has a coefficient of volume expansion of 9.6 ✕ 10−4 (°C)−1, when the temperature is 10.0°C. If the temperature rises to 25.0°C, how much gasoline (in gal) will spill over the edge of the container?  gal

The side of a cube decreases at a rate of 7 m/sec. Find the rate at which the volume changes, when the side is 4 m. O 336 m³ / sec 224 m3 / sec - 336 m³ / sec - O -112 m³ / sec 448 m³ / sec

What is the volume (in cm3) when 6.7 kg of iron cans are melted, then cooled into a solid cube? [the density of iron cans is 7.87 g/cm³]

If a hose is filling a swimming pool at a rate of 10 liters per​ minute, how long will it take to fill the 3,400​-gallon ​pool?

A 300 gallon tank initially contains 90 gallons of brine containing 400 Ibs. of salt. Brine containing 1 lb. of salt per gallon enters the tank at 4gal/s, and the well-mixed brine flows out of the tank at 1 gal/s. How much salt will the tank contain when it is full of brine?

The rectangular tank shown here, with its top at ground level, is used to catch runoff water. Assume that the water weighs 62.3 lb/ft³. a. How much work does it take to empty the tank by pumping the water back to ground level once the tank is full? b. If the water is pumped to ground level with an (8/11)-horsepower (hp) motor (work output 400 ft-lb/sec), how long will it take to empty the tank (to the nearest minute)? c. Show that the pump in part (b) will lower the water level 15 ft (halfway) during the first 20 minutes of pumping. d. What are the answers to parts (a) and (b) in a location where water weighs 62.16 lb/ft³? 62.42 lb/ft³? a. Set up an integral to find the work done. W = Ground 5 ft level 0 30 14 ft

an ice cube is shrinking uniformly at a rate of 8 cubic inches per hour. when the cube has a volume of 27 cubic inches, at what rate is each side shrinking?

There is an order to infuse normal saline at 25 drops per minute and a tubing set that says there are 15 drops/mL. How long will it take for 1 liter to infuse?

The volume of a ball is 768 cm and its density is 3.2 g/cm3. What is the mass of the ball? Round to the nearest tenth if necessary.

find the diameter of the cone with a volume of 489.84 cubic meters