A closed cylindrical container is filled with a fluid that has a specific gravity of 1.7. What is the pressure exerted by this fluid at a depth of 15m?

A container is filled to a depth of 19.0 cm with water. On top of the water floats a 31.0-cm-thick layer of oil with specific gravity 0.600. What is the absolute pressure at the bottom of the container?

A water pipe having a 2.59 cm inside diameter carries water into the basement of a house at a speed of 0.770 m/s and a pressure of 213 kPa. If the pipe tapers to 1.31 cm and rises to the second floor 6.71 m above the input point,  A) What is the speed of the water at the second floor? B) What is the water pressure at the second floor?

(Figure 1) shows a container with a cross section area of 15 cm² in which a layer of water floats on top of a layer of mercury. A 1.0 kg wood block with a cross-section area of 10 cm² floats on the water. The water depth, measured from the bottom of the block, is 25 cm. A pressure gauge at the bottom of the container reads 20 kPa. Figure 1.0 kg 25 cm h 10 cm² 15 cm² 1 of 1 > Part A = What is the depth dm of the mercury? Use pw = 1000 kg/m³ as the density of water and pm density of mercury. Express your answer in centimeters. ► View Available Hint(s) dm = Submit ——| ΑΣΦ Provide Feedback Request Answer ? cm Review 13,600 kg/m³ as the Next >

A bottle has a neck of diameter 3.5 cm  and a base of 13 cm. It is completely filled with a fluid and the fluid in the neck is struck with a force of 125 N. What force is exerted on the base?

Water flows at a speed of 2.8 m/s through a 9 cm diameter pipe to a 4.5 cm diameter pipe. What is the speed of the water in the 4.5 cm diameter pipe?

A horizontal pipe of cross-sectional area 0.29 m2 at height 6 m carries water at speed 1.9 m/s. The pipe turns upward and levels out again to horizontal at height 14 m, where the pipe narrows to 0.11 m. If the pressure is 202 kPa at the original height, what is the pressure in kPa at the final height? The density of water is 1000 kg/m3. kPa

Water travels through a pipe at 11.1 m/s. The pipe expands from a crossectional area of 1.5 m2 to an area of 12.0 m2. What is the speed of the water in the second part of the pipe in m/s? How much is the pressure change in KPa as the pipe expands? The density of water is 1000 kg/m3. Enter a positive value for an increase in pressure, a negative value for a decrease.

A beaker is filled with an unknown liquid up to a depth of 10.00cm . The gauge pressure at the bottom of the beaker is measured to be 1540.00Pa . What is the density of the liquid contained in the beaker?