Question
A car is driving around a flat, circularly curved road with a radius of 4.40 * 10^2 m. The mass of the car is 1420 kg and the coefficient of static friction between its tires and the road is 0.30.
A. What is the maximum speed the car can have without slipping
____m/2
Expert Solution
arrow_forward
Step 1
Trending nowThis is a popular solution!
Step by stepSolved in 4 steps with 4 images
Knowledge Booster
Similar questions
- A jet flying at 136 m/s banks to make a horizontal circular turn. The radius of the turn is 3810 m, and the mass of the jet is 2.08 x 105 kg. Calculate the magnitude of the necessary lifting force. L= iarrow_forwardA vehicle with a mass of 2.5x103 kg is driving at a speed of 66 km/h around a level roadway with a curvature radius of 56 meters, just staying on the roadway (i.e., driving at the maximum safe speed for this turn and the tire treads). What is the coefficient of friction between the tires and the road? (Hint: Watch your units above.) Answer: μ = __________ (no units)arrow_forwardA block is placed on a turntable 43 cm from the axis of rotation. The turntable very slowly speeds up to 35.5 RPM. What is the minimum coefficient of static friction between the block and the turntable surface that would prevent the block from sliding away under these conditions?arrow_forward
- A car enters a horizontal, curved roadbed of radius 50.0 m. The coefficient of slatic friction between the tires and the roadbed is 0.20. What is the maximum speed with which the car can safely negotiate the unbanked curve?arrow_forwardA car travels at a constant speed of 25.5 mi/h (11.4 m/s) on a level circular turn of radius 43.0 m, as shown in the bird's-eye view in figure a. What minimum coefficient of static friction, ?s, between the tires and the roadway will allow the car to make the circular turn without sliding?arrow_forwardA 693 kg car traveling at 32.8 m/s is going around a curve having a radius of 105.5 m that is banked at an angle of 26.4°. The coefficient of static friction between the car's tires and the road is 0.600. What is the magnitude of the force exerted by friction on the car?arrow_forward
- An airplane is flying in a horizontal circle at a speed of 441 km/h. If its wings are tilted 40° to the horizontal, what is the radius of the circle in which the plane is flying? Assume that the required force is provided entirely by an "aerodynamic lift" that is perpendicular to the wing surface. m I 0arrow_forwardA 6.0 x 102 kg car is moving around a circular track that has a radius of 1.00 x 102 m at 20. m/s. How much frictional force is required to keep the car from skidding.arrow_forwardAn engineer wants to design an oval racetrack such that 3.20 × 10³ lb racecars can round the exactly 1000 ft radius turns at 1.00 x 102 mi/h without the aid of friction. She estimates that the cars will round the turns at a maximum of 175 mi/h. Find the banking angle necessary for the race cars to navigate the turns at 1.00 × 10² mi/h without the aid of friction. 0 = What additional radial force F, is necessary to prevent a race car from drifting on the curve at 175 mi/h? This banking and radius are very close to the actual turn data at Daytona International Speedway, where 3.20 × 10³ lb stock cars travel around the turns at about 175 mi/h. 0 Fr= Narrow_forward
- A car of mass 622 kg is driving around a curve with a circular arc of radius 20 m. If the car drives at a speed of 12 m/s, what is the minimum value of the coefficient of friction between the car's tires and the road that will keep the car on the road?arrow_forwardcar travels at a steady 40.5 m/s around a horizontal curve of radius 251 m. What is the minimum coefficient of static friction between the road and the car's tires that will allow the car to travel at this speed without sliding?arrow_forwardA case of fine glassware is loaded into a truck and sits on the floor. The truck drives along a street that follows along a circle that has a radius of 30.5 meters. The street is not banked. The coefficient of static friction between case of glass and the floor of the truck is 0.570. If the truck drives too fast, the case of glassware will slip and the glass will be damaged. How fast can the truck be moving without the box sliding?arrow_forward
arrow_back_ios
arrow_forward_ios