A beam with the dimensions as shown (wall thickness = 0.5 in) has a moment couple M applied to it about the horizontal axis. Determine the value of M where the beam maximum stress won't exceed the yield stress oy = 40 ksi, also determine the stress at point A. L₂ M Side View M 5 in 6 in X Front View wall thickness = 0.5 in

A beam with the dimensions as shown (wall thickness = 0.5 in) has a moment couple M applied to it about the horizontal axis. Determine the value of M where the beam maximum stress won't exceed the yield stress oy = 40 ksi, also determine the stress at point A. L₂ M Side View M 5 in 6 in X Front View wall thickness = 0.5 in

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter5: Stresses In Beams (basic Topics)

Section: Chapter Questions

Problem 5.5.27P: A small dam of a height h = 6 ft is constructed of vertical wood beams AB, as shown in the figure....

See similar textbooks

Similar questions

Below Figure shows the section of an angle purlin. A bending moment of 5 kN.m is applied to the purlin in a plane at an angle of 30 deg to the vertical y axis. If the sense of the bending moment is such that both its components Mx and My produce tension in the positive xy quadrant, calculate the maximum direct stress in the purlin, stating clearly the point at which it acts. * 100 mm E 10mm 30 C D -10mm 57 MPa. 89 MPa. Non Above O 72 MPa. 125mm
of on If the I-flange beam is subjected to a shear force V= 20 kN, calculate the transverse shear stress at the point A (considered located on the web part). The area moment of inertia of that section about its neutral axis N.A. is INA = 44.167 x (10) m². Flange Web. Select one: O 10 Mpa O 4.95 MPa O 41 MPa O 100 MPa O50 MPa 20 mm 100 mm A 100 mm 25 mm 150 mm 25 mm Time left 0:46:01 s
A beam section has the z-axis and y-axis as the principal centroidal axes and I₂ = 15 x 106 mm and I, = 8 x 10 mm. The beam carries a moment with components M₂ = 5 kN.m and M₁ = -4 kN.m. What is the stress at the location z = 35 mm and y = 60 mm within the beam section? Show your work Select one: a. -2.5 MPa b. 2.5 MPa c. Od. 37.5 MPa -37.5 MPa
Q1/ A composite beam is made of wood and reinforced with steel strap located on its bottom side. It has the cross-sectional area shown in fig. if the beam is subjected to a bending moment of M=2kN.m, determine the normal stress at wood and steel. Take Ew=12Gpa and Est=200Gpa. 150mm Wood en 20mm Steel 150mm
The simply supported joist is used in the construction of a floor for a building. In order to keep the floor low with respect to the sill beams C and D, the ends of the joists are notched as shown. If the allowable shear stress is tallow = 350 psi and the allowable bending stress is sallow = 1500 psi, determine the height h that will cause the beam to reach both allowable stresses at the same time. Also, what load P causes this to happen? Neglect the stressconcentration at the notch.
Find the second moment of area, the location of the neutral axis, and the distances from the neutral axis to the top and bottom surfaces. Consider that the section is transmitting a positive bending moment about the z axis, Mz, where M₂ = 10 kip-in if the dimensions of the section are given in ips units, or M₂ = 1.13 kN·m if the dimensions are in Sl units. Determine the resulting stresses at the top and bottom surfaces and at every abrupt change in the cross section. From the figure, с - 12.5 B A y I 50 100 75 12.5- 12.5 25 D 100 The area is determined to be 3750 mm² The distances from the neutral axis to the top and bottom surfaces are determined to be 57.292 The second moment of area is determined to be 4.293 x 106 mm4. mm and 42.708 ✪ mm.
Find the second moment of area, the location of the neutral axis, and the distances from the neutral axis to the top and bottom surfaces. Consider that the section is transmitting a positive bending moment about the z axis, Mz, where M₂ = 10 kip-in if the dimensions of the section are given in ips units, or M₂ = 1.13 kN·m if the dimensions are in Sl units. Determine the resulting stresses at the top and bottom surfaces and at every abrupt change in the cross section. From the figure Z 1 in 112 in y in → ← ¹ in 12 in D C B A ++ in The area is determined to be 2.0625 in². The distances from the neutral axis to the top and bottom surfaces are determined to be 0.858 x in and The second moment of area is determined to be 0.447 in 4. 1.017 xin.
The beam shown is subjected to compressive force of C1/2 kN.m, and bending moment of C2 N.m, calculate the total stresses on both points A and B* Sigma A = Sigma B = C2=140 C1=90 Во 40mm 20mm
Determine the moment M that must be applied to the beam in order to create amaximum stress of 90 MPa. Also sketch the stress distribution acting over the cross section.
A member having the dimensions shown is used to resist an internal bending moment of M kNm. Determine the maximum stress in the member if the moment is applied (a) about the z axis (as shown) (b) about the y axis. Sketch the stress distribution for each case. Take: M= 90 kNm A mm A= 200 mm B= 150 mm B mm Solution: The moment of inertia of the cross-section about z and y axes are I;-4 1 - AB³ 12 (10) m* I BA = (10) m*
Determine the internal normal force and shear force, and the bending moment in the beam at points C and D. Assume the support at B is a roller. Point C is located just to the right of the 8-kip load. For your explanation section, complete a FBD of the other side of the beam from the version you did to solve the problem. 8 kip 40 kip · ft A to to D B- 8 ft 8 ft- -8 ft
The Z-section of Example D-7 is subjected to M = 5 kN · m, as shown. Determine the orientation of the neutral axis and calculate the maximum tensile stress c1and maximum compressive stress ocin the beam. Use the following numerical data: height; = 200 mm, width ft = 90 mm, constant thickness a = 15 mm, and B = 19.2e. Use = 32.6 × 106 mm4 and I2= 2.4 × 10e mm4 from Example D-7