A beam 12 m is simply and symmetrically supported over a span of 8 m. it carrier concentrated loads of 2 KN and 5 KN at the left hand and right- hand ends respectively as well as a uniformly distributed load of 1.25 KN/m between the supports. Write shear and moment equations for the beams as shown in the figure. let x be the distance measured from left end of the beam. Also, draw shear and moment diagrams, specifying values at all change of loading positions and at points of zero shear

A beam 12 m is simply and symmetrically supported over a span of 8 m. it carrier concentrated loads of 2 KN and 5 KN at the left hand and right- hand ends respectively as well as a uniformly distributed load of 1.25 KN/m between the supports. Write shear and moment equations for the beams as shown in the figure. let x be the distance measured from left end of the beam. Also, draw shear and moment diagrams, specifying values at all change of loading positions and at points of zero shear

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Problem 4: The loading diagram for a cantilevered beam is shown below. The support at A is fixed. (a) Determine the support reactions at A (b) Determine the shear and bending moment as a function of x, where (0) Oft sxs 6ft (in) 6ft sxs 10ft Please draw the relevant FBDs (c) Draw the shear and bending moment diagrams for this loading on a separate sheet. (d) Indicate the maximum absolute values of shear and bending moment. Why is it important to know these values? 2k/ft 21/M 10k 10 8k MEA 40kft
The Simply supported beam in Figure has a rectangular cross section 120 mm wide and 200 mm high. (1)Compute the reaction forces Ra and Point RE. (2)Compute the maximum bending stress in the beam. - --- AAIL (4)Compute the bending stress at a point on section B that is 25 mm below the top of the beam. |15 kN 6 kN/m 100 mm NA - В ID 100 mm 0.8 m 120 mm 2 m 1.0 m RA RE (a)
Draw the normal force (N), shear force (T) and bending moment (M) diagrams of the beam whose span and loading condition are given in the figure. L3(m)=1.5 L4(m)=2 P3(kN)=44 P4(kN)=82
For the figure shown below, compute the bending moment in section 1. Neglect the weights of the member. Note that point B is pin-connected.
3. A beam ABCDE is 16 m long and is simply supported at A and D 14m apart. At B, 4 m from A, there is a concentrated load of 30kN and a uniformly distributed load of 5kN is carried over the position AC which is 10 m long. A further concentrated load of 10KN is carried at E on an overhang 2 m from D. Draw the shear force and bending moment diagrams indicating the maximum values on each. (OF
Consider the compound beam shown in (Figure 1). Suppose that P1 = 950 N, P2 = 1500 N, w = 550 N/m, and point E is located just to the left of the 950-N force. Follow the sign convention.determine the Normal, Shear, and moment Forces at point E and F
Problem 1 ( forces of 1.5 kid 3.0 kN at points B and C respectively. The cross section of the beam is The simply supported beam shown below is subjected to two concentrated rectangular with a width of 48 mm and a height of 72 mm. The side view showing the cross section is also illustrated below. 1- Draw the shear force and moment diagrams of the beam. From the diagrams, determine the magnitude and location of the maximum bending moment and the maximum transverse shearing force. 2- Determine the moment of inertia of the cross section about the bending axis (neutral axis) 3- Calculate the maximum tensile and compressive stresses in the beam. A 1.5 m 1.5 KN B 1.5 m 3.0 kN с 1.5 m 48 mm 72 mm
Ql: A beam with overhang is supported and loaded as shown in Figure. Draw the shear force and the bending moment diagrams, showing clearly the position and maximum B.M in the beam. 20 KN stma 4 m 3m
Calculate the shear force V (in kN) and bending moment M (in kN - m) at a cross section located just right of the 4 kN load on the cantilever beam AB shown in the figure. (Use the deformation sign convention.) | 4.0 kN 1.4 kN/m 3.9 m 3.9 m 7.8 m V = 10.92 v kN M - -85.2 kN m
A beam of 8 m long, loaded with uniformly distributed load on the 4 m span CE with a concentrated load on C and moment on B as shown in Figure. Draw the Shear Force and Bending Moment diagrams stating the important values..Note: SN = %3D Student Number SN (kN) SN (kN/m) SN (kN.m) A E B C D 2 m 2 m 2 m 2 m
1. Draw the shear and moment diagrams for the simply supported beam described in the Figure below 8 kN/m C B 4 m 2 m
beams are loaded and supported as shown in the accompanying figure: Draw complete shear and moment diagrams for 2500 lb 800 Ib/ft 8 ft 5 ft 10 ft