A bar having a circular cross section is carrying a tensile load of 30 kN. If the diameter and length of the bar are 6 mm and 80 cm respectively, calculate the deflection. Assume Young’s modulus is 207 GPa

A bar having a circular cross section is carrying a tensile load of 30 kN. If the diameter and length of the bar are 6 mm and 80 cm respectively, calculate the deflection. Assume Young’s modulus is 207 GPa

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter1: Tension, Compression, And Shear

Section: Chapter Questions

Problem 1.7.2P: A round bar of 10 mm diameter is made of aluminum alloy 7075-T6 (see figure). When the bar is...

See similar textbooks

Related questions

Q: A laminated spring 1 m long is made up of plates, each 5 cm wide and 1 cm thick. If the bending…

A: We know that a 1 m long laminated spring is made up of plates that are each 5 cm broad and 1 cm…

Q: A simply supported beam, 50mm wide by 100mm high and 300 mm long is subjected to a concentrated load…

Q: PROBLEM (3´) A 2-in.-diameter bar 6 ft long, shortens 3/64 in. under an axial load of 40 kips. the…

Q: A simply supported circular steel plate of diameter 1 m and thickness 50 mm is subject to an…

Q: Determine the total deformation of the steel rod shown in figure (1) under the given loads. Take the…

A: The loads in the different segments of the composite rod are,

Q: Step by step

A: This is the very basic question of strength of material portion. Used concept is elongation of a bar…

Q: A wire 20 m long, weighing 0.8N per m, and having a cross sectional area of 6.2 mm2, is suspended…

Q: Calculate the compression resistance in kN of the cross-section of a stocky universal beam (UB)…

Q: Find the final length of the bar of an aluminum alloy with a modulus of elasticity of 68.8 GPa,…

Q: a. A metal thickness 16mm and having a rectangular cross-section carries a load of 60KN. Find the…

Q: A copper wire of length 3 m and 2 mm diameter is subjected to a tension of 5N. Calculate the…

A: Given, L = 3 m = 3000 mm D = 2 mm F = 5 N E = 120GPa E=StressStrain Stress, σ=FA=5π4×22=5π=1.591…

Q: A circular plate of 80 mm radius and 6 mm thick carries a central load of 2 kN. Calculate the…

A: A circular plate with an 80 mm radius and a thickness of 6 mm supports a central load of 2 kN.When…

Q: A bar is subjected to fluctuating tensile load from 20KN to 100KN. The material has yield strength…

Q: A column is made from a rectangular bar whose cross section is 5.1 cm by 8.7 cm If the height of the…

Q: 4. Compare between modulus of elasticity ( E) ( 180-220 GPa), and modulus of rigidity (G). for…

A: E=180-220 GPaμ=.27 to .3 for steel G=?E=2G1+μ

Q: A rod of diameter 50 cm and length 6 m is hanging vertically and carries an axial load of 10 kN at…

A: Self weight of the rod below the 2m mark from the bottom Volume of rod hanging below 2m maek =…

Q: A bar having a circular cross section is carrying a tensile load of 30 kN. If the diameter and…

A: Given data: P=30 kNd=6 mmL=80 cmE=207 GPa Need to determine the deflection in the bar.

Q: Click to see additional instructions Calculate the minimum Safety Factor if the radius r= 5mm and M=…

Q: A rectangular plate 0-5 m long, 0.1m wide and 6 mm thick is clamped at the edges. It carries a udl…

A: The given rectangular plate and the udl is as shown below, Calculate the udl value, Intensity=1.5…

Q: A Steel rod has a diameter of 10 mm .The maximum allowed elastic elongation of the rod is 0.005%…

Q: Figure 3. A bronze bar having a cross-sectional, area of 200 mm?.carries the axial loads shown in…

A: Given that , A=200mm2E=83GPa

Q: load of 200 KN. If the length of the bar is 2 m and E = 200 GPa. What will be the elongation of the…

Q: Figure 1 shows a composite shaft ABCD acted upon horizontal forces. The moduli of elasticity and the…

Q: A leaf spring is to be made of seven steel plates 6-5 cm wide and 6.3 mm thick. Calculate the length…

A: A leaf spring is made up of seven steel plates that are 6.5 cm broad and 6.3 mm thick.We must choose…

Q: estimate the maximum central deflection before the yield stress

A: Given L=0.6 m cross section=15 mm x 5 mm yield stress= 300 MPa E=200 GPa To determine: The maximum…

Q: A 30 cm X 16 cm rolled steel joist of I-section has flanges 11 mm thick and web 8 mm thick. Find the…

A: Given that, I-section,Width of flange=30 cmHeight of web=16 cm,Thickness of flange=11 mm,Thickness…

Q: A composite rod is comprised of an EN8 steel shaft of length, diameter and Young’s modulus of 200…

A: The schematic diagram of the given composite rod:- Given data, Length of steel rod, L1 = 0.2 m…

Q: A steel rod of 30 mm diameter is subjected to a 10 kN of axial load. The length of the steel rod is…

Q: 1. The bar shown in the figure is composed of a 2-cm-diameter aluminum section, a 3-cm-diameter…

Q: A bar of triangular cross section with base 15mm carries a load of 100 kN. Calculate its minimum…

Q: 10∙1 A rectangular plate 0.5 m long, 0.25 m wide and 10 mm thick is simply supported at the edges.…

Q: A steel rod of length 10 m is subjected to a axial load of 10 kN. Calculate the elongation of the…

A: Given data Length of steel rod (L) = 10 m Axial load (P) = 10 kN diameter (d) = 40 mm E = 200 GPa…

Q: A 12” X 16”simply supported pine wood beam is being considered to carry a uniform load distribution…

A: Load = 20 kips Ultimate tensile stress = 4500 psi FOS = 2.5

Q: Answer the following

A: Given, E=30,000,000 psi, G=11,500,000 psi

Q: A steel bar of 30 mm * 30 mm square cross section is subjected to an axial compressive load of…

A: As per given A=30×30mm Load=300kn We have to determine contraction of bar

Q: A steel rod with a diameter of 2 inches, is subjected to a torque of 50000lb-ft. If the modulus of…

Q: A thin disk attached to the free end of an elastic beam experiences transverse motion. Calculate for…

Q: A steel rod with length equal to 12 ft, has a diameter of 0.8 inches in quarter of its length and a…

Q: A 30 cm X 16 cm rolled steel joist of I-section has flanges 11 mm thick and web 8 mm thick. Find the…

A: To find-: The safe uniform distributed load w. Given-: The thickness of flange is a=11 mm. The depth…

Q: A steel bar with cross section of 100mm x 20mm is 450mm in length. The bar is subjected to an axial…

Q: A steel tube of 5m long ,40mm inner diameter and 80mm outer diameter is used as an euler column.…

Q: A bar is subjected to fluctuating tensile load from 20kN to 100KN. The material has yield strength…

A: As per given question Fluctuation tensile load P1=20kn…

Q: A column of length 1 m is hinged at both ends has cross-section (10 x20) mm2. Young's modulus of…

A: Given data:Length of the column, L=1 mCross-section of column, A=10×20 mm2E=200 GPa

Q: A steel bar 50 mm in diameter and 2 m long is surrounded by a shell of a cast iron 5 mm thick.…

Q: A bar is subjected to fluctuating tensile load from 20 KN to 100 kN. The material has yield strength…

A: Given, Minimum force during a cycle = Fmin = 20 kN Maximum force during a cycle = Fmax = 100 kN…

Q: A leaf spring 1 m long is made up with steel plates with width equal to 6 times its thickness.…

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Similar questions

10-mm-diameter rod of 3003-H14 aluminium alloy is subjected to a 6-kN tensile load. Calculate the resulting rod diameter. Calculate the diameter if this rod is subjected to a 6-kN compressive load, given that the elastic modulus =70 GPa and poisson ratio=0.33
A steel bar with cross section of 100mm x 20mm is 450mm in length. The bar is subjected to an axial compressive load of 265 kN on its cross section. Assume modulus of elasticity of steel is 210GPa and Poisson's ratio is 0.3. Find the final thickness of the bar.
The bulk modulus of the steel bar with modulus of elasticity 1.8x105N/mm2 and Poisson’s ratio 0.25 is
Calculate the total elongation of the bar. Its modulus of elasticity is 70 GPa and the cross sectional area is 600 mm2.
A leaf spring is to be made of seven steel plates 6-5 cm wide and 6.3 mm thick. Calculate the length of the spring so that it may carry a central load of 2.75 kN, the stress being limited to 160 MPa. Calculate also the deflection at the centre of the spring. E = 210 GPa.
A circular metal column is to support a load of 500 ton-force and it must not compress more than 0.1 mm. The moduus of elasticity is 210 GPa. The column is 2 m long. Calculate the area and diameter.
Find the final length of the bar of an aluminum alloy with a modulus of elasticity of 68.8 GPa, whose initial length l0 is 1.9 m when a tensile stress of 208.0 MPa is applied.
A cylindrical metal rod of 20mm diameter and 1m length is subjected to a tensile load of 60KN. To what length the cylinder should be centrally bored on one side to reduce weight by material removal, so that the total extension will increase by 10 percent under the same pull. The diameter of the hole being bored on one side is equal to 10mm. Take E= 200GPa.
Calculate the crippling load for a column using Euler's theory for long columns, whose effective length is 4 m. Take modulus of elasticity as 'E' kN/m² and moment of inertia as 'I' m4. Consider that both ends of the column are fixed. 1. 0.500 T² El kn 2. 0.0255 m² EI KN 3. 0.0625 T² EI KN 4. 0.025 T² EI KN
A circular plate of 80 mm radius and 6 mm thick carries a central load of 2 kN. Calculate the maximum deflection and maximum radial stress, when (a) its edges are clamped, and (b) edges are simply supported. Take E = 200 GPa and v = 0.3.
A Steel rod has a diameter of 10 mm .The maximum allowed elastic elongation of the rod is 0.005% Assume Young modulus( E) to be 200 GPa. What is the maximum load in kg that the rod could support elasticly. Perform one calculation with no safety factor and use a safety factor equal to 2 for the next equation
A 125 long bar with a cross section of 12.7 mm by 3.2 mm is exposed to a 1560 N tensile load. Calculate the stress and elongation of the ABS bar (secant modulus Esecant= 2270 MPa).