A 25V solar panel will be made up of 400 individual cells, each of which generates 0.25W with an output current of 500 mA.  The panel will be connected to a converter through cables with a total of 0.75 Ohms.   What percentage power loss is due to the cable resistance?

In step 3, what is the potential difference across D2 after the jumper wire is connected

3-Determine the output voltage in Figure 8 for each of the following failure modes: (a) L1 open (b) L2 open (c) R1 open (d) a short across R2 5 V 1 MHz L₁ m 8.0 μΗ L₂ m 4.0 με Figure 8 R₁ ww 100 (2 R₂ 100 Ω R3 56 Ω

3. For the converter in Figure 3, input voltage, Vin(V) = 100V, output voltage, Vo(V) = 400V, switching frequency, Fsw (Hz) = 120k. Now please use Figure 3 and Figure 4 to answer questions a) to f). L a) b) I D₁ CV Ro Vin S₁ Figure 3 IL 12 = 9.5A Ton Toff 1₁ = 8.5A time Figure 4 What is the average voltage across the capacitor, C? Inductor current IL waveform is shown in Figure 4. If Vo is constant, what is load current value, lo? (Load current, lo is the current through the load, Ro)