Pls answer with complete solution. I need it ASAP. I refer hand written solution so I can understand more. TY A 20-hp suction pump at 70% efficiency draws water from a suction line whose diameteris 200mm and discharges into air thru a line whose diameter is 150 mm. The velocity inthe 150mm line is 3.6 m/s. If the pressure at point A in the suction pipe is 34 kPa belowthe atmosphere, where A is 1.8 m below section B on the 150 mm line, determine themaximum elevation above section B to which water can be raised assuming a head lossof 3 m due to friction. Express answer in meters.

Answered: Image /qna-images/answer/d93ef581-0576-49a4-a70f-53481e55cad4.jpg

A 20-hp suction pump at 70% efficiency draws water from a suction line wh is 200mm and discharges into air thru a line whose diameter is 150 mm. The the 150mm line is 3.6 m/s. If the pressure at point A in the suction pipe is 34 the atmosphere, where A is 1.8 m below section B on the 150 mm line, dete maximum elevation above section B to which water can be raised assuming of 3 m due to friction. Express answer in meters.

A 20-hp suction pump at 70% efficiency draws water from a suction line wh is 200mm and discharges into air thru a line whose diameter is 150 mm. The the 150mm line is 3.6 m/s. If the pressure at point A in the suction pipe is 34 the atmosphere, where A is 1.8 m below section B on the 150 mm line, dete maximum elevation above section B to which water can be raised assuming of 3 m due to friction. Express answer in meters.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A liquid whose specific gravity is 2.0, is flowing in a 50mm diameter pipe. The total head at a given point was found to be 17.5m. That point is 3m above the datum and the pressure in the pipe is 65.6KPa. Compute the discharge in that point of the pipe.
A closed cylindrical tank 3m high and 1m in diameter contains 1.2m of oil (SG = 0.8), 1m of water and air under a pressure of 16 KPa. A 125mm diameter orifice is placed at the vertical side of the tank, 300mm from the bottom. Determine the actual discharge at the orifice if C = 0.94. Hide answer choices A 98.61 L/s B) 103.01 L/s C No answer among the choices 96.83 L/s E) 92.69 L/s
At point A where the suction pipe leading to a pump is 2. 50 meters below the pump an open manometer indicates a vacuum of 9 in. of mercury. The pipe is 125 mm in diameter, the discharge is 35 liters per second of oil (sp. gr. = 0. 80). Compute the total head at point A with respect to a datum at the pump.
Observation wells A and B are located in the direction of flow, Water level in well A is Ha and in well B is Hb. Point C is between AB and on the AB line. What is the height (m) of water level at point C? (There is no pumping here. Wells are for observation only) Ha, m 66 Hb, m cm/s 50 Hydraulic conductivity, K 0.02 AC, km 1.3 Determine the Darcy velocity (cm/s) for water flowing through a sand column with the following characteristics: Hydraulic head drop cm BC, km 6 0.5 The sand column length cm 55
In a horizontal 5-inch pipe (ID = 5 in.), water is being delivered at a stable discharge of 25 ft³/s. if the pressure increased from 20 psi to 40 psi after a centrifugal pump, how will the flow velocity be affected? O The flow velocity will increase by 4 times. O The flow velocity will decrease by half. O The flow velocity will remain the same. O The flow velocity will double.
A closed cylindrical tank 3m high and 1m in diameter contains 1.2m of oil (SG = 0.8), 1m of water and air under a pressure of 16 KPa. A 125mm diameter orifice is placed at the vertical side of the tank, 300mm from the bottom. Determine the actual discharge at the orifice if C = 0.94. A 92.69 L/s B 96.83 L/s 98.61 L/s D No answer among the choices E 103.01 L/s
Situation 1: In the pipe system shown, the velocity of water in pipe A is 1 m/s. The friction factor f = 0.02 for all pipes. a. Determine the discharge in pipe B. b. Determine the velocity in pipe C. c. Determine the headloss in pipe E. d. Determine the difference in elevation of the two reservoirs. Water D A 300 m 200 mm D 300m 500 mm Diom 600m 300mm Diam 300m 300mm D B 800 m 300mm Diam E
A venturi meter with a throat diameter of 100 mm is fitted in the inclined pipeline of 200 mm diameter with oil of specific gravity 0.88 flowing upwards. The venturi meter coefficient is 0.96. Two pressure gauges are fitted at tapping points, one at the throat reads the vacuum pressure of 40 cm of mercury and the other in the inlet pipe 320 mm below the throat is 20.231 N/cm2. If the loss of head in the main and throat is 0.35 times the kinetic head of the pipe, determine2.1 the volume flow rate of oil through the pipe2.2 the difference in level in the two limbs of the mercury manometer if it is connected to the tapping points and connecting pipes are filled with the same oil
For the pipe enlargement shown, the pressure at sections (1) and (2) are 56.3 and 58.2 psi, respectively. Determine (Gasoline density=1.32 slug/ft³) a. The Velocities at section 1 and section 2. b. The flow rate (Q) of the gasoline in the pipe. 2.05 in. (1) Gasoline 3.71 in.
Oil (SG = 0.86) is passing through a horizontal pipe whose diameter increases from 150mm diameter at point 1 to 225mm diameter at point 2. If the pressure at point 2 is higher than the pressure in point 1 by 36KPA, determine the discharge in the pipe. A 167.4 L/s B) 74.4 L/s c) No answer among the choices D 80.2 L/s E) 180.5 L/s
Figure 8-24 shows a pump drawing water from a reservoir and discharging it into the air at point B. The pressure at point A in the suction pipe is a vacuum of 10 in mercury, and the discharge is 3.00 ft'/s. Determine the total head at point A and at point B with respect to a datum at the base of the reservoir. 10-in-diameter 8-in-diameter suction pipe discharge pipe 40 ft Pump 15 ft 25 t Fig. 8-24
Figure 8-24 shows a pump drawing water from a reservoir and discharging it into the air at point B. The pressure at point A in the suction pipe is a vacuum of 10 in mercury, and the discharge is 3.00 ft'/s. Determine the total head at point A and at point B with respect to a datum at the base of the reservoir. 10-in-diameter 8-in-diameter suction pipe discharge pipe 40 ft Pump 15 ft 25 ft Fig. 8-24