2. A 1500 kg electric vehicle travels along an asphalt roadway with a 5° grade at 100 km/h anda rolling resistance coefficient of 0.013. The frontal area is 2.05 m² and a drag coefficient is0.32. The battery capacity is 85kWh and the battery nominal voltage is 320V. The air densityof 1.2 kg/m3.(a) What is the power required to propel this vehicle?(b) The gear ratio is 10.7, the tire radius is 0.23m. Assume 100% efficiency for the gear. (i)What is the torque seen by the ac propulsion motor (ii) What is the power and speed ofthe motor?(c) What is the range of the vehicle considering 80% Depth of Discharge on a flat road at aspeed of 50 km/h?3. In the system of problem 2, the propulsion motor used is a star connected interior permanentmagnet motor fed by a three phase IGBT inverter. The motor is operated in direct torquecontrolled mode. The inverter output voltage is 414V(L-L) and the modulation index is 0.9.The motor efficiency is 98% and power factor is 0.78. The dc link capacitor value is 5000uF.Assume space vector PWM strategy for the inverter. The efficiency of each power converterstage is 97%.(a) Draw a complete power converter circuit of the system (including devices) showing thevalues of voltage, current, and power at the battery output, inverter input, and inverteroutput. Consider the motor power obtained from problem 2(b).(b) Draw a vectored control system for controlling the torque of the motor(c) Express the motor currents in stationary reference frame.(d) Calculate the currents in synchronously rotating reference frame at angular differences of0, 60°, and 90⁰(e) For the 60° angle in 2 (d), convert the d,q currents directly to currents in a, b, c frame?

Answered: Image /qna-images/answer/b3e2a5e8-6812-4a1b-8324-74e1bb6235b0.jpg

A 1500 kg electric vehicle travels along an asphalt roadway with a 5° grade at 100 km/h and a rolling resistance coefficient of 0.013. The frontal area is 2.05 m² and a drag coefficient is 0.32. The battery capacity is 85kWh and the battery nominal voltage is 320V. The air density of 1.2 kg/m3. (a) What is the power required to propel this vehicle? (b) The gear ratio is 10.7, the tire radius is 0.23m. Assume 100% efficiency for the gear. (i) What is the torque seen by the ac propulsion motor (ii) What is the power and speed of the motor? (c) What is the range of the vehicle considering 80% Depth of Discharge on a flat road at a speed of 50 km/h?

A 1500 kg electric vehicle travels along an asphalt roadway with a 5° grade at 100 km/h and a rolling resistance coefficient of 0.013. The frontal area is 2.05 m² and a drag coefficient is 0.32. The battery capacity is 85kWh and the battery nominal voltage is 320V. The air density of 1.2 kg/m3. (a) What is the power required to propel this vehicle? (b) The gear ratio is 10.7, the tire radius is 0.23m. Assume 100% efficiency for the gear. (i) What is the torque seen by the ac propulsion motor (ii) What is the power and speed of the motor? (c) What is the range of the vehicle considering 80% Depth of Discharge on a flat road at a speed of 50 km/h?

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter5: Analysis Of Convection Heat Transfer

Section: Chapter Questions

Problem 5.26P

See similar textbooks

Similar questions

The drag polar equation of a light airplane in clean configuration can be written as Cp = 0.358 + 0.0405 C₁². It has a weight of 18,681 N. The wing area is 14.41 m². Calculate the minimum power required in watts. (Round off answer with no decimal places, No units, No commas) Answer given: 1461792 A 5,000 lbs. aircraft has an excess power of 75 hp at sea level. If the service ceiling is 3,657.6 m, determine the time to climb from sea level to absolute ceiling in minutes. (Round off answer with no decimal places. No units, No commas) Answer given: 17
Calculate the Road load power for the case Toyota Prius (fronatal area =0.8m2 sliding over a street has coefficient of rolling resistance CR= 0.015, drag coefficient CD=0.26 air density=1.2 kg/m3 the mass of the car 1500 kg. O a. 3.48 kW O b. 2.15 kW O . 9.72 kW
For the vehicle whose specifications are given below, calculate the engine power required in kW to climb up a slope of 12% (40 + XY) with a constant speed of km / h and upwind at a speed of 12 km / h. Mass: 1396 kg Load Breakdown (f / r): 61/39% Length width Height: 4556/1745/1372 mm Drag Coefficient: 0.31 Max. Motor Power: 5750 rpm for 84 kW Max. Torque: 3750 rpm for 157 Nm Max. Motor speed: 6500 rpm Gear Ratios: 3.42, 2.14, 1.45, 1.03, 0.77 Differential Ratio: 3.84 Tires: 185/65 VR 14 SBR Tire Pressure (f / r): 2.0 / 1.9 kgf / cm2
8.) A circular cylinder 4m long and 3m in diameter is in an air stream. The flow velocity is 5 m/s L parallel to the axis of the cylinder. Given that the coefficient of drag, CD on the cylinder is 1.3, and the density of air is 1.225 kg/m3. What is the force on the cylinder? A. 0.090 KN B. 0.14 KN C. 0.24 KN D. 0.91 kN
1. A piston-prop aircraft has a wing loading of 1600 N/m², wing area of 25 m² and its drag polar is given by Cp 1.5. The reciprocating engine develops 750 kW at sea level, and the propulsive efficiency of the engine-propeller combination is 0.85. Draw the power-available and power-required curves at sea level. Determine the maximum and minimum speeds for level flight at sea level. What is the minimum power required for level flight at sea level? Determine the corresponding velocity and lift coefficient. 0.025 + 0.05C. The maximum lift coefficient is
Qustion. An aircraft is flying in level flight at a speed of 200 km/h through air (density, p = 1.2 kg/m³, and viscosity, μ = 1.6 x 10-5 N-s/m²). The lift coefficient at this speed is 0.4 and the drag coefficient is 0.0065. The mass of the aircraft is 800 kg. The effective lift area of the aircraft NOTE= Do not give wrong answer I will dislike , If not sure skip it
The drag coefficient for a car with a frontal area of 26 ft? is being measured in an 8 ft x 8 ft wind tunnel. The density of air under the test conditions is 2.4 x 10 3 slugs/ft, When the air flow rate is, 500,000 ft/min, the drag force on the car was measured to be 170 lb. The drag coefficient under the test conditions is most nearly O 0.30 O 0.32 O 0.28 O 0.34
1. An airplane weighs 36,000 lb. and has a wing area of 450 fte. The drag equation is C, =0.014 + 0.05C} . It is desired to equip this airplane with turboprop engines with available power such that a maximum speed of 602.6 mph at sea level can be reached. The available power is assumed to be independent of flight speed. Calculate the maximum rate of climb and the speed at which it occurs. Given: W = 36,000 lb S = 450 ft² C, = 0.014+0.05C V = 602.6 mph max THPy = cons tan t THP AV constant Max EHP Point of THP, REQD. Flisht Speed. V Vmax 602.6 mph Required: Max R.C. and Vmax R.C. Horsepower, hp
QUESTION 2 A streamlined experimental solar car has a frontal area of 0.48 m² and an expected coefficient of drag of 0.12. The car and driver have a total mass of 200 kg. What is the maximum speed that could be expected if the maximum power available from its electric motor is 350 W? Assume a rolling resistance coefficient of 0.015. Take the density of air as 1.21 kg/m³.
If your lift to drag ratio is 15 for airline A flight and the airplane weighs 15,000-lb for L/Dmax, what’s the speed for L/Dmax at 22,500 lbs.?
A truck having projected area of 6.5 m² and travelling at 72 km/h has a total resistance of 1.6 kN. Out of this resistance, 30% is due to rolling, 20% due to surface friction and rest is due to drag. Calculate the coefficient of drag if specific weight of air is 12 N/m^3.
A jet airplane weighs 160,000 N and has a zero-lift drag coefficient of 0.008 and a wing area of 42 m2. At 100 m/s at sea level, the rate of climb is 11.5 m/s. The thrust developed by the engines is equal to 27,000 N. Determine the maximum rate of climb and the corresponding flight speed at sea level . [Answer: 21.6013 m/s and 214.5577 m/s]