A 12 000-N shark is supported by a rope attached to a 3.80-m rod that can pivot at the base. 20.0° 60.0° (a) Calculate the tension in the cable between the rod and the wall, assuming the cable is holding the system in the position shown in the figure. (Give you answer to three significant digits.) N (b) Find the horizontal force exerted on the base of the rod. magnitude N direction ✓ ---Select--- to the right (c) Find th to the left kerted on the base of the rod. Ignore the weight of the rod. magnitude direction ---Select--- ✓ A 12 000-N shark is supported by a rope attached to a 3.80-m rod that can pivot at the base. 20.0° 60.0° (a) Calculate the tension in the cable between the rod and the wall, assuming the cable is holding the system in the position shown in the figure. (Give you answer to three significant digits.) N (b) Find the horizontal force exerted on the base of the rod. magnitude direction N ---Select--- ✓ (c) Find the vertical force exerted on the base of the rod. Ignore the weight of the rod. magnitude N direction ---Select--- ✓

A 12 000-N shark is supported by a rope attached to a 3.80-m rod that can pivot at the base. 20.0° 60.0° (a) Calculate the tension in the cable between the rod and the wall, assuming the cable is holding the system in the position shown in the figure. (Give you answer to three significant digits.) N (b) Find the horizontal force exerted on the base of the rod. magnitude N direction ✓ ---Select--- to the right (c) Find th to the left kerted on the base of the rod. Ignore the weight of the rod. magnitude direction ---Select--- ✓ A 12 000-N shark is supported by a rope attached to a 3.80-m rod that can pivot at the base. 20.0° 60.0° (a) Calculate the tension in the cable between the rod and the wall, assuming the cable is holding the system in the position shown in the figure. (Give you answer to three significant digits.) N (b) Find the horizontal force exerted on the base of the rod. magnitude direction N ---Select--- ✓ (c) Find the vertical force exerted on the base of the rod. Ignore the weight of the rod. magnitude N direction ---Select--- ✓

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

Rope A lies in the +x direction and rope B is 120o counterclockwise from rope A (they are tied together at the origin). Rope C is also attached to rope A and B at the origin. If rope A has 3.0 units of force, and rope B is pulling with 5.0 units of force, how many units of force, and in what direction must rope C pull to balance and create a static equilibrium with the other two ropes?
In a room with a ceiling height of 2.6 meter, a 2.5 meter plank is supported by a cable attached to the ceiling and box, as shown in the figure. If the cable is 0.954 meters in length and the height of the box is 0.8 meters, a) Determine the weight if the plank when cable A exerts a force of 100N. b) Determine the vertical force (perpendicular to the horizontal ground) exerted by the box on the plank) PS: Include any Free Body Diagrams
i need the answer quickly
(Figure 1) shows a metal advertising sign of weight w suspended from the end of a horizontal rod of negligible mass and length L. The end of the rod with the sign is supported by a cable at an angle θ from the horizontal, and the other end is supported by a hinge at point P. Using the idea that there is zero net vertical force on the rod with the attached sign, find the tension in the cable. Using the idea that there is zero net horizontal force on the rod with the attached sign, find the horizontal component of the force exerted by the hinge.
3) A massless bar AC is supported by a pin joint at A and cable CD. Mass m is suspended from bar AC at point B, as shown. Given m-50kg and the following dimensions: AB 1m, BC 3m, angle ACD 30 degrees a. Draw a free body diagram for bar ABC. b. Find the tension in cable CD.
Determine the magnitude P of the vertical force required to lift the wheelbarrow free of the ground at point B. The combined weight of the wheelbarrow and its load is 223 lb with center of gravity at G. P Go 22" 25" Answer: P = 19" HI B 22" 8" C lb
a 1001 N uniform beam is attached to a vertical wall at one end and js supported by a cable at the other end 1550 N crate hangs from the far end of the beam find the magnitude if the tension in the wire the angle theta is 21 degrees and phi is 32 degrees length of beam is L
Determine the forces in members BC and CG. The forces are positive if in tension, negative if in compression. A 10 kips Answers: BC= CG= Mi B 11' G Mi 13' 11' C 11 D 5 70° E kips kips
A 2.00 m long horizontal uniform beam of mass 20.0 kg is supported by a wire as shown in the figure. The wire makes an angle of 20.0 degrees with the beam. Attached to the beam 1.40 m from the wall is a ball with a mass of 40 kg. What is the tension in the string? a)1,000 Nb) 1,090 N c) 2,100 N d) 2,250 N e) 2,680 N
help pls
A 32.8 ft ladder weighing 400 N leans against a frictionless vertical wall such that it makes an angle of 53 degrees with the floor. Find the force exerted by the wall on the ladder.
a meter log is a uniform bar of mass m = 77 kg. You want to support it at a rest parallel to the ground. so you place it on a triangle support at 33 cm mark and tie it with a rope on the ground at the 28 cm mark. A) draw your own configuration out. calculate the tension of the rope ____ N, downward, upward, right, left, or none and support force provided by the triangle support _______ N, downward, upward, right, left, or none b) suppose a gumdrop (point mass mb = 14.00 kg) hangs on to the meter log at the 91 cm mark How large will the tension be on the rope? ______ N conceptually explain why it should increase, decrease, or stay the same, compared to part A. C) Now with everything including the gumdrop, the triangle support has been moved away from the rope, to the end of the meter log.Explain why the system itself cannot stay balanced anymore, and the rope goes (T→0). Calculate: rotational inertia of the system below. I = _______ kg·m2Calculate the sizes (+ only) of both the…