A 100 kg flow monitoring device is placed on a table in a laboratory. A pad of stiffness 2 x 105 N/m and damping ratio 0.051 is placed between the apparatus and the table. The table is bolted on the laboratory floor. Measurements indicate that the floor has a steady state vibration amplitude of 0.8 mm at a frequency of 50HZ. What is the amplitude of acceleration of the flow monitoring device?

A 100 kg flow monitoring device is placed on a table in a laboratory. A pad of stiffness 2 x 105 N/m and damping ratio 0.051 is placed between the apparatus and the table. The table is bolted on the laboratory floor. Measurements indicate that the floor has a steady state vibration amplitude of 0.8 mm at a frequency of 50HZ. What is the amplitude of acceleration of the flow monitoring device?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Q2/ The measurements on a mechanical vibrating system show that it has a mass of 8 kg and that the springs can be combined to give an equivalent spring of stiffness 5.4 N/mm. If the vibrating system has a dishpot attached which exerts a force of 40 N when the mass has a velocity of 1 m/s, find (1) critical damping coefficient, (2) damping factor, (3) logarithmic decrement, and (4) ratio of two consecutive amplitudes.
Hello, please solve this problem. Thank you very much
A block of mass 50 kg supported by a lining material made of rubber as shown in fig. When the block placed on the lining, the lining of static deflection is 10 mm. When the vibrator act with force F = 200sin50t N found the vibration amplitude is 2 mm. Determine i. the stiffness coefficient of the lining ii. The natural frequency i. the damping coefficient lining iv. the force exerted by the lining to the floor. vibrator 50 kg
a damper, the frequency of oscillation is found to the stiffness of the spring is 1 kN/m. By introducing coefficient of the damper? be 90% of the original value. What is the damping In a spring-mass system, the mass is 0.1 kg and the stiffness of the spring is 1 kN/m. By introducing be 90% of the original value. What is the damping (a) 1.2 Ns/m (b) 3.4 Ns/m (c) 8.7 Ns/m (d) 12.0 Ns/m
[6] An instrument panel weighing 30 lb is installed in a vehicle on a flexible mount that has an equivalent stiffness k = 400 lb/in and negligible damping. As a result of engine vibration, the vehicle vibrates with a steady-state amplitude of o.25 in at a frequency of 40 Hz. Determine the steady-state amplitude of vibration of the instrument panel.
A vibratory system consists of a mass 12.5 kg, a spring of stiffness 1000 N/m, and a dashpot with damping coefficient of 15 Ns/m. The value of critical damping of the system is (a) 0.223 Ns/m (b) 17.88 Ns/m (c) 71.4 Ns/m (d) 223.6 Ns/m
Solve correctly
Obtain X1(s)/F(s) and then determine the damping coefficient C of the mechanical system below. m2 =160.1 kg, k =953.7 N/m, k, =1,451.7 N/m, b, =148.0 N-s/m. X1(t) x2(t) k2 f2(t) m2 k, b2 massless plate Sonraki
I need the answer as soon as possible
Provide complete solution
A rail road bumper is designed as a spring in parallel with a viscous damper. What is the bumper's damping coefficient such that the system has a damping ratio of 1.25, when the bumper is engaged by a rail car of 20,000 kg mass. The stiffness of the spring is 200 kN/m. If the rail car engages the bumper, while traveling at a speed of 20m/s, what is the maximum deflection of the bumper? poooo m
please I want really correct accurate answer for this question