A 10-m high cylindrical container with a radius of 2 m is filled with oil and water. If the lower 2.5-m of the tank is water with a density of ρ = 1000 kg/m3 while the rest of the tank is filled with oil with a density of ρ = 800 kg/m3, determine the pressure difference, in kPa, between the top and bottom of the cylinder. Assume that the gravity is 9.81 m/s2.

A 10-m high cylindrical container with a radius of 2 m is filled with oil and water. If the lower 2.5-m of the tank is water with a density of ρ = 1000 kg/m3 while the rest of the tank is filled with oil with a density of ρ = 800 kg/m3, determine the pressure difference, in kPa, between the top and bottom of the cylinder. Assume that the gravity is 9.81 m/s2.

Name: A 10-m high cylindrical container with a radius of 2 m is filled with
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A 10-m high cylindrical container with a radius of 2 m is filled with oil and water. If the lower 2.5-m of the tank is water with a density of ρ = 1000 kg/m3 while the rest of the tank is filled with oil with a density of ρ = 800 kg/m3, determine the

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.121P: One side of the container has a 03-m square door that is hinged at its top edge. If the container is...

See similar textbooks

Similar questions

One side of the container has a 03-m square door that is hinged at its top edge. If the container is filled with water, determine the smallest force F that must be applied to the bottom edge of the door to keep it closed.
The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate and the smooth surface at B due to water pressure acting on the gate. Use =62.4lb/ft3 for water.
Determine the mass of weight necessary to increase the pressure of the liquid trapped inside a piston-cylinder device to 127 kPa.Assume the piston to be weightless with an area of 0.10 m2.The outside pressure to be 100 kPa and g=9.81 m/s2.
The pressure in the pressurized water tank is measured by a multi-fluid manometer with one end open to the atmosphere. Determine the absolute pressure of air in the tank (pressure at point 1) assuming that the air pressure is uniform. The densities of mercury, water and oil are 13,600 kgm/m3, 1000 kgm/m3, 850 kgm/m3 ,respectively. h1= 25cm, h2=35 cm and h3=50 cm.
A closed tank rectangular in plane with vertical sides is 1.8m deep and contains water to a depth of 1.2m. Air is pumped into the space above the water until the air pressure is 35kN/m2. If the length of one wall of the tank is 3m, determine the resultant force on this wall and the height of the centre of pressure above the base
A spherical balloon containing Oxygen (initially at sea level) has a radius of 8 inches. If the uniform density of air is 0.07498lb/ft3 and that the pressure at sea level is 14.7psia, determine the new radius (inch) of the balloon if it has been brought above sea level by 6000ft.
1. The tank is fined with water. Determine the resultant force acting on the triangular plate A and the location of the center of pressure. Measured from the top of the tank. Solve the problem using the Geothermal Method. (Hibbeler, 2015). 2 m 2m 0.5 m 0.6 m 0.75 m 0.75 m 0.3 m 0.6 m 0.3 m
A tank is filled with oil whose density is ρ = 850 kg/m3. If the volume of the tank is V = 2 m3, determine the amount of mass m in the tank.
Both a gage and a manometer are attached to a gas tank to measure its pressure. If the reading on the pressure gage is 100 kPa, determine the distance between the two fluid levels of the manometer if the fluid is
The water in a tank is pressurized by air, and the pressure is measured by a multifluid manometer. Determine the gage pressure of air in the tank if h1 = 0.4 m, h2 = 0.6 m, and h3 = 0.8 m. Take the densities of water, oil, and mercury to be 1000 kg/m3, 850 kg/m3, and 13,600 kg/m3, respectively.
A tank is filled with oil whose density is p=850 kg/m3. If the volume of the tank is V=2m3. Determine the amount of mass in the tank in Ibm.
The water in a tank is pressurized by air, and the pressure is measured by a multifluid manometer as shown in Fig. The tank is located on a mountain at an altitude of 1500 m where the atmospheric pressure is 75.6 kPa. Determine the air pressure in the tank if h1 =50.1 m, h2 =5 0.2 m, and h3 =5 0.35 m. Take the densities of water, oil, and mercury to be 1000 kg/m3, 900 kg/m3, and 13,600 kg/m3 respectively.