7- Illustrates a composite wall. The wall is composed of two materials (A with kA = 1 W/m-K and B with kB = 5 W/m-K), each has thickness L = 1.0 cm. The surface of the wall at x = 0 is perfectly insulated. A very thin heater is placed between the insulation and material A; the heating element provides q" = 5000 W/m2 of heat. The surface of the wall at x = 2L is exposed to fluid at Tf, = 300 K with heat transfer coefficient in h = 100 W/m2-K. Draw a resistance network to represent this problem; and calculate the value of each resistance.

7- Illustrates a composite wall. The wall is composed of two materials (A with kA = 1 W/m-K and B with kB = 5 W/m-K), each has thickness L = 1.0 cm. The surface of the wall at x = 0 is perfectly insulated. A very thin heater is placed between the insulation and material A; the heating element provides q" = 5000 W/m2 of heat. The surface of the wall at x = 2L is exposed to fluid at Tf, = 300 K with heat transfer coefficient in h = 100 W/m2-K. Draw a resistance network to represent this problem; and calculate the value of each resistance.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: A composite walls are constructed from an inner brick wall with thick L1= 25 cm and k1= 0.4 W/m K, a…

Q: Consider a multi-layered walls of a storage building (no windows) that is made of three layers as…

Q: Consider the section of multilayers wall as shown in the figure, assuming one dimensional heat flow,…

A: To determine:- I) Thickness of the walls L1 and L2 II) Surface temperatures T1 and T3 III) The rate…

Q: In a portion of the square, 2-D finite difference mesh shown, node 2 is located on an insulated…

Q: Consider a thick spherical wall with insulation at both mk mk the inner and outer walls. The inner…

Q: Steel pipe (outer diameter 100 mm) is covered with two layers of insulation. The inner layer, 40 mm…

Q: An infinite wall that has a thickness of L = 0.22 m has a uniform heat generation of = 1250 W/m³ and…

Q: The inside surface temperature of a glass oven door (0.5 m x 0.5 m x 0.001 m) is 180°C, the outside…

Q: The heat flux across a certain conductor is found to be 288 W m2. The temperature drop along the…

A: To find: The thermal conductivity of material. Given: The heat flux is q=288 Wm2. The temperature…

Q: Consider a cylindrical steel pipe of an inner radius of 2.9m, an outer radius of 3.2m, and thermal…

A: Given A cylindrical steel pipeinner radius (r1)=2.9 mouter radius (r2)=3.2 mThermal conductivity…

Q: A dormitory at a large university, built 50 years ago, has exterior walls constructed of L, =…

Q: The construction of a wall is made of different materials as shown below. Happened. The room…

Q: (a) The heat transfer rate function. (b) The rate of change of energy stored in the wall. (c) The…

A: For solution refer below images.

Q: The heat flux that is applied to the left face of a plane wall is q" = 50 W/m². The wall is of…

Q: 3. Consider a plane composite wall that is made of two materials of thermal conductivities ka = 205…

Q: 3-5 The wall of a drying oven is constructed of an insulation layer of glass-wool (k=0.05 W/m.K)…

Q: Find the total conductive thermal resistance of a 2-m long two-layered cylindrical insulation jacket…

Q: GROUB C Example 1 A 15 mm diameter and 5 m long electric wire is tightly wrapped with 2 mm thick…

A: Given:Diameter ofwire,D=15mm=0.015mSo radius of wire,r1=D2=0.0152=0.0075mLength of wire…

Q: A dormitory at a large university, built 50 years ago, has exterior walls constructed of L, =…

A: Answer: (a) The heat flux through the original walls is 75.51 W/m2. (b) The heat flux through the…

Q: A plane wall is having width 'b' mm and height 3 times of its width. The wall thickness is 170 mm.…

A: Given data: h=3bt=170 mmk=17 W/mKT1=200°CT2=40°CQ=646 W Need to determine the width and height of…

Q: Temperature distribution of a wall is given as T(x) = -100x + 50 and the cold surface is exposed to…

Q: A very thin electrical strip providing heat flux of 909 W/m2 is attached to the plate as shown in…

Q: A 90-amp electric current is flowing through a 6-mm diameter lead wire. The thermal conductivity of…

Q: f the surface of a plane wall with heat conduction coefficient k is under constant heat flux (q0 ")…

A: Given, A plane wall with constant heat with temperature at x =0 and x= L same.

Q: The given figure shows a thermal network with To1 = 325.15 K, T1 = 310.15 K, Rwall = 0.08 KW, and…

Q: The compartment below is used as a freezer of refrigerator compartment. Inner wall is at -8 C and…

A: Option C is correct K=0.097 w/mk

Q: The oven of a stove must have a sufficient insulation so that the surface temperature of the stove…

A: For solution refer below images.

Q: Consider a composite wall of overall height H = 30 mm and thickness L = 40 mm. Section A has…

Q: The rear window of a car is defrosted by the passage of warm air on the internal surface. If the…

Q: Refer to the rectangular region in the figure below, the inner boundary surfaces are insulated and…

A: Conduction heat transfer is the transfer of heat by virtue of direct contact or molecular…

Q: T The cross-section of a wooden wall is shown in the figure. Compute for the temperature on the…

Q: Exercise 5 the bobul 3-75 Consider a 5-m-high 8-m-long, and 0.22-m-thick wall whose representative…

A: Given: The height of the wall, h = 5 m The total length of the wall, L = 8 m The total thickness of…

Q: 165mm W/m?-K ulated with several materials, and convection on the inside and outside of the pipe is…

Q: Q3: A composite wall consists of an iron plate of thickness L1=3 cm and thermal conductivity of kl…

Concept explainers

Conduction and Convection

When energy travels from one object to another it is said to have undergone heat transfer. Heat transfer is nothing but the transfer of thermal energy or internal energy from one thing to another, like e.g., when a vessel with water, kept on top of a burner, heats up because of the flame underneath it.

Question

7- Illustrates a composite wall. The wall is composed of two materials (A
with kA = 1 W/m-K and B with kB = 5 W/m-K), each has thickness L =
1.0 cm. The surface of the wall at x = 0 is perfectly insulated. A very thin
heater is placed between the insulation and material A; the heating
element provides q" = 5000 W/m2 of heat. The surface of the wall at x =
2L is exposed to fluid at Tf, = 300 K with heat transfer coefficient in h =
100 W/m2-K. Draw a resistance network to represent this problem; and
calculate the value of each resistance.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Temperature distribution of a wall is given as T(x) = -100x + 50 and the cold surface is exposed to a convection environment at temperature of 20 °C. If the wall thickness is 10 cm and the conductivity is 1 W/mK what is the convection coefficient between the cold surface and the environment?
Please quick answer
EXAMPLE = wire Consider a long resistance wire of radius ₁ 0.2 cm and thermal conductivity k = 15 W/m . °C in which heat is generated uniformly as a result of resistance heating at a constant rate of g = 50 W/cm3. The wire is embedded in a 0.5-cm-thick layer of ceramic whose thermal conductivity is k = 1.2 W/m °C. If the outer surface temperature of the ceramic layer is measured to be Ts = 45°C, determine the temperatures at the center of the resistance wire and the interface of the wire and the ceramic layer under steady conditions. ceramic 17 Interface Mech. Eng. UOK Wire Ceramic layer T₁=45°C ۳۰/۱۰/۲۰۱۳
A multi-layered wall with the dimensions shown in the figure has temperatures of 200°C and 50°C over the left and right surfaces, respectively. If the thermal conductivities of the wall materials A and C are k-60 W/m-K, k-24 W/m-K. If total rate of heat transfer through the wall is 175 W, what is the thermal conductivity of material B? T- 200°C T-soc 6 cm- 2 om 25 om
Steel pipe (outer diameter 100 mm) is covered with two layers of insulation. The inner layer, 40 mm thick, has a thermal conductivity of 0.07 W / (m K). The outer layer, 20 mm thick, has a thermal conductivity of 0.15 W / (m K). Pipes are used to deliver steam with a pressure of 800 kPa. The temperature on the outer insulation surface is 24 ° C. If the pipe is 10 m long, determine the following: (assuming that the conduction heat transfer resistance of the steel pipe and the vapor convection resistance are negligible). a. Heat loss per hour. = Answer kJ / hour. b. Temperature between insulation layers. = Answer ° C.
A semiconductor material has a conductivity of 0.0124 W/cm-K. It has the shape of a rectangular bar with cross sectional area of 1 cm2and length of 3 cm. One end is maintained at 300 °C and the other end at 100 °C. The bar carries a current of 50 A and has resistivity of 1.5x10-3ohm-cm. Assuming the longitudinal surface is insulated, calculated the midpoint temperature in the bar.
I need the answer quickly
Temp base is 156 not 456 as in the diagram
Please solve quickly
7. A composite wall consists of three materials, as shown in Figure 2. The inside wall temperature is 200°C and the outside air temperature is 50°C with a convection coefficient of 10 W/m²-K. Determine the temperature along the composite wall. Where A is the area of cross- section (can be taken to be equal to 1) and k is the conductivity. Problem is governed by the equation d²T -kA- = 0, 0
A 5cm copper plate has a thermal conductivity of 395 ?/m-k is used as a heat sink for a semiconductor. A 1mm layer of thermal paste lies in between the two and it has a thermal conductivity of 10 ? /m-k. Solve for the heat transferred at a 5cmx5cm area if the semiconductor is 80C, while the copper plate has a temperature of 30C since it is exposed to ambient air temperature.
A hot water pipe is used for domestic applications is insulated with a layer of calcium silicate. If the insulation is 25 mm thick and its inner and outer surfaces are maintained at Ts,1 = 800 K and Ts,2 = 400 K, respectively. The outside diameter is 0.12 m. Calculate the heat loss per unit length of the pipe. Given the thermal conductivity of calcium silicate insulation equals to 0.09 W/m.K.