5N-m 150 mm 50 mm 400 mm 200 mm

1. The built-up beam pictured on the right is subjected to an internal moment of M = 75 kNm. a) At which point(s) of the cross-section the normal stress is zero? b) Determine the maximum compressive and tensile bending stress in the beam.

Determine the x, y, z components of reaction at the journal bearing C if 0 = 0°.

The pedal and brake drum are illustrated in Figure Q2(b). The 160 mm radius brake drum is attached to a larger flywheel (not shown). The total mass moment of inertia of the flywheel and drum is 20 kg-m? and the coefficient of kinetic friction between the drum and the brake shoe is 0.35. The initial angular velocity of the flywheel is 360 rpm counterclockwise. If the system is to stop in 100 revolutions, determine the vertical force P that must be applied to the pedal C. (Hint: Draw a free-body diagram for the brake drum and pedal, separately and label all the forces)