A channel shape, C8 × 18.75, is used as a tension member. The channels are bolted to a 10mm-thick gusset plate with 22mm- diameter bolts. The tension member is A572 Grade 50 steel (Fy = 345 MPa, Fu = 450 MPa) and the gusset plate is A36 (Fy = 250 MPa, Fu = 410MPa).What is the ult. capacity of the channel in kips, if yielding on the gross area governs?What is the ult. capacity of the channel in kips, if fracture on the net area governs?What is the ult. capacity of the gusset plate in kips, if block shear governs?What is the effective net area of the channel section, in square millimeters? 50, 75A channel shape, C8 x 18.75, is used as a tension member. The channels are bolted to a 10mm-thick gusset platewith 22mm- diameter bolts. The tension member is A572 Grade 50 steel ( Fy = 345 MPa, Fu = 450 MPa)and the gusset plate is A36 (Fy = 250 MPa, Fu = 410MPA).50mma. What is the ult. capacity of the channel in kips, if yielding on the gross area governs?b. What is the ult. capacity of the channel in kips, if fracture on the net area governs?C. What is the ult. capacity of the gusset plate in kips, if block shear governs?d. What is the effective net area of the channel section, in square millimeters?O O O50mmC8x18.75t = 10mm

"Since you have posted a question with multiple sub-parts. We will solve the three sub-parts for…

50, 75 , 75 A channel shape, C8 x 18.75, is used as a tension member. The channels are bolted to a 10mm-thick gusset plate with 22mm- diameter bolts. The tension member is A572 Grade 50 steel ( Fy = 345 MPa, Fu = 450 MPa) and the gusset plate is A36 (Fy = 250 MPa, Fu = 410MPA). 50mm O O O a. What is the ult. capacity of the channel in kips, if yielding on the gross area governs? b. What is the ult. capacity of the channel in kips, if fracture on the net area governs? C. What is the ult. capacity of the gusset plate in kips, if block shear governs? d. What is the effective net area of the channel section, in square millimeters? 50mm C8x18.75 t= 10mm

50, 75 , 75 A channel shape, C8 x 18.75, is used as a tension member. The channels are bolted to a 10mm-thick gusset plate with 22mm- diameter bolts. The tension member is A572 Grade 50 steel ( Fy = 345 MPa, Fu = 450 MPa) and the gusset plate is A36 (Fy = 250 MPa, Fu = 410MPA). 50mm O O O a. What is the ult. capacity of the channel in kips, if yielding on the gross area governs? b. What is the ult. capacity of the channel in kips, if fracture on the net area governs? C. What is the ult. capacity of the gusset plate in kips, if block shear governs? d. What is the effective net area of the channel section, in square millimeters? 50mm C8x18.75 t= 10mm

Steel Design (Activate Learning with these NEW titles from Engineering!)

6th Edition

ISBN:9781337094740

Author:Segui, William T.

Publisher:Segui, William T.

Chapter3: Tension Members

Section: Chapter Questions

Problem 3.5.4P

See similar textbooks

Similar questions

5) Calculate P the allowable tensile load for the butt joint shown. Each A325-N high-strength bolt has a diameter of 0.9 inches. The plates are made of ASTM A36 steel. If the applied load is 200 kips, is this connection adequate? If not, what needs to be changed so that this connection can handle an applied load of 200 kips? P- ФФ P ! 12"x " P. P.
4. An UPE 300 is to be used as a tension member and it is bolted to a 10mm thick gusset plate with bearing type 8-M20 8.8 bolts as shown in the figure below. a. Check all spacing and edge distance requirements. b. Compute the allowable tensile strength of the channel UPE 300. Don't consider shear strength of the bolts and bearing strength of the bolt holes. [all dimensions are in mm] Material both for gusset plate and UPE 300: S275 F-275N/mm² Fu=430N/mm² UPE 300 Ag = 5660 mm² tw 9.5 mm x = 28.9 mm 70 160 70 + 10mm thick gusset plate +50+ 80 -80-80-50 o +50+80 -80 80-50 UPE 300
Material Strengths: Fy = 248 MPa, F = 400 MPa For the two lines of bolt holes, the pitch is the value that will give a net area DEFG equal to the one along ABC. The diameter of the holes is 22 mm. The thickness of the plate is 12 mm. Determine the LRFD design tensile strength based on yielding on gross area. D A to 50 1 ÓB 50 50 ic O 410 kN O 464 kN O 446 kN O 401 KN F IG Pitch Pitch KISS|Y
Determine the allowable tensile force P which can be appllied to the plates shown. The AISC specifications A36 steel and 20 mm diameter A325 bolts placed in standard holes with threads excluded from the shear plane are used in a bearing in a bearing type connection. Fy = 248 MPa, Fu = 400 MPa, Fv = 206.9 MPa and Fp = 1.5 Fu. P P CIVIZ 12mm 250 mm ENGINEERING - STEEL DESIGN 12mm P P
Bolted and Riveted Connections From the bolted connection shown, the diameter of bolts is 18mm0 with the hole diameter equal to 3mm bigger than the bolt, the angular section is 100 x 75 x 8 mm, with an area of 1340 mm2. Thickness of the gusset plate is 9mm. The gusset plate and angle arc A36 steel with Fy = 250 MPa and Fu = 400 MPa. Determine the tensile capacity of the connection based on gross area. Determine the tensile capacity of the connection based on effective net area using a reduction factor of 0.85. Determine the tensile capacity of the connection based on gross area.
Topic:Bolted Steel Connection - Civil Engineering -Steel Design *Use latest NSCP/NSCP 2015 formula to solve this problem *Please use hand written to solve this problem A channel shown is attached to a 12 mm gusset plate with 9-22 mm diameter A 325 bolts as shown. Use LRFD. Fnv = 300 MPa Fu = 400 MPa Fy = 248 MPa Ag = 3354 mm2 Question: Determine the capacity of the channel based on the bearing strength of the connection.
WT12×153 t05 WT12×153 Determine the design strength of two WT-shapes (WT12×153) connected by plates with 1 in. diameter bolts. The LRFD design strength of a single bolt in a web is 60 kips. Use ASTM A36 steel. 3" 3" 3"3"2" it3"+3" 3"3"3"† Side View Double Plate WT12×153 Top View
Check the bolted section of the given gusset plate connection assuming that the connection is done by M12 bolts with a staggered arrangement. The maximum design tensile axial force to be sustained is Ned = 168 kN. Assume a grade of S235 steel. P. Gusset plate BỘ do=13mm Gusset plate O DO t=16mm t-16mm1 Ni.Ed FO NtEd do=13mm do3D13mm G. 40mm 40mm 140 mm 240mm 30mm
A bolted connection shown consists of an angular section L 150mmx100mm x8mm. Bolt diameter = 18mm. Determine the effective net area of the section. (Ae). Properties of an L150x100x8: Area = 1,894 mm2 Fy = 248 MPa Fu = 400 MPa x = 23 mm y = 48 mm 50 50 50 50 50 50 150 40 www.AwNNO 60 100 50 P
1. A single-angle tension member, an L4x4×3/8, is connected to a gusset plate with 7/8-inch diameter bolts as shown in the attached figure. Assume that the effective area is 85% of the computed net area. The steel is ASTM A242 with Fy=50ksi and Fu=70ksi. A. Compute the design strength for LRFD. If the applied load is 100 kips, is the member satisfactory or not satisfactory? B. Compute the allowable strength for ASD. If the applied load is 80 kips, is the member satisfactory or not satisfactory? F L 4 x 4 x 3/8 Section
300 A W300 x 67 has two nes of 20 mm dia. Bolts in each flange (3 bolts in each line which has spacing as shown A36 steel is used with Fy= 250 MPa. Fu = 400 MPa Properties of W300 x 67 A = 8250 mm2 bf - 201 05 mm = 1440 mm d=300mm tw=84mm a) Compute the effective net area of the section b) Compute the allowable tensile strength of the section 201.05 CIVIL ENGINEERING-STEEL DESIGN 14.40 201.05 50 137.05
The tension member shown is a PL 5/8 x 10, and the steel is A36. The bolts are 7/8-inch in diameter. a. Determine the design strength for LRFD. b. Determine the allowable strength for ASD. Tühitinin 2" 2" + 32 | 3² | O O O O OO O