5.0 cm length of a cylindrical copper wire has a radius of 0.01 mm. The resistivity of copper is 1.68 × 10−8[Ωm].  (a) What is the length of the wire in m?  (b) What is the cross-sectional area of the wire in m2?  (c) What is the resistance of the wire?  (d) If a voltage of 2.8 × 10−9 V is set up across the ends of the wire, what is the current flowing through the wire?  (e) How much charge will drift through a cross-section of this wire in 0.001s?

A particular wire has a resistivity of 3.3 x 10-8 · m and a cross-sectional area of 3.7 x 10-6 m². A length of this wire is to be used as a resistor that will develop 51 W of power when connected across a 20-V battery. What length of wire is required? km

A copper wire of radius a = 0.240 mm has an aluminum jacket of outer radius b = 0.329 mm. There is a current i = 1.57 A in the composite wire. Take the resistivity for copper and aluminum to be 1.69 × 10-8Ω·m and 2.75 × 10-8Ω·m. Calculate the current in (a) the copper and (b) the aluminum. (c) If a potential difference V = 13.1 V between the ends maintains the current, what is the length in meters of the composite wire?

As part of a class project you are given 0.900 g of copper and asked to fabricate a wire with uniform cross-section. You use up 95% of the copper and make a wire with a resistance of 0.723 Ω. The resistivity of copper is 1.72  10-8 Ω · m and its density is 8.92  103 kg/m3. (a) What length of wire do you end up with? (m)(b) What is the diameter of the wire? (mm)

Part (a) I measure the resistance of this wire and find it to be R = 156 Q. What is the resistivity of the material the wire is made out of? p= Problem 7: A particular wire has a length of L = 2.7 m and a circular cross-sectional area of radius r= 1.69 mm. G= sin() cos cotan() asin()) acotan() atan() cosh() tanh() I= sin()) cos() cotan() asin() sinh() atan() acotan cosh() tanh() cotanh() Degrees O Radians B Degrees O Radians Part (b) What is the conductivity of this wire, in inverse Ohms per meter? 0 tan()) π ( acos() E ^^^L sinh() cotanh() g L P Y d h m r tan() π acos() E ^^^^ π E 1 Part (c) Give an expression for the current density in the wire if an electric field E is passing through it. Write this in terms of the resistivity and the other variables in the problem. J= n R ( ^^^ sin() cos() cotan() asin() atan() acotan() cosh() + + 7 8 9 4 5 6 1 2 3 0 END NO BACKSPACE DEL CLEAR Part (d) Calculate the current in the wire, in milliamperes, if the field strength is 5.28 V/m. - END NO…

An aluminum rod with a square cross section is 1.8 m long and 6.2 mm on edge. (a) What is the resistance between its ends? (b) What must be the diameter of a cylindrical copper rod of length 1.8 m if its resistance is to be the same as that of the aluminum rod? The resistivity of aluminum is 2.75 x 108 Q-m and the resistivity of copper is 1.69 x 108 Q:m. (a) Number i Units (b) Number i Units

A copper wire of radius a = 0.256 mm has an aluminum jacket of outer radius b = 0.337 mm. There is a current i = 1.59 A in the composite wire. Take the resistivity for copper and aluminum to be 1.69 × 10-8Ω·m and 2.75 × 10-8Ω·m. Calculate the current in (a) the copper and (b) the aluminum. (c) If a potential difference V = 15.0 V between the ends maintains the current, what is the length in meters of the composite wire?