5. A 3-phase overhead transmission line has the following constants:Resistance/phaseInductive reactance/phase10 2= 35 23 x 10* siemenCapacitive admittance/phaseIf the line supplied a balanced load of 40,000 kVA at 110 kV and 0-8 p.f. lagging, calculate :(i) sending end power factor(iii) transmission efficiency(ii) percentage regulation[) 0-798 lag (ii) 10% (iii) 96-38%]|

Answered: Image /qna-images/answer/b161baaf-a25e-4683-ac77-ffa8b1fab2dc.jpg

5. A 3-phase overhead transmission line has the following constants : Resistance/phase Inductive reactance/phase = 35 2 Capacitive admittance/phase = 3 x 10 siemen = 10 2 If the line supplied a balanced load of 40,000 kVA at 110 kV and 0-8 p.f. lagging, calculate: (i) sending end power factor (iii) transmission efficiency (ii) percentage regulation |() 0-798 lag (ii) 10% (iii) 96-38%

5. A 3-phase overhead transmission line has the following constants : Resistance/phase Inductive reactance/phase = 35 2 Capacitive admittance/phase = 3 x 10 siemen = 10 2 If the line supplied a balanced load of 40,000 kVA at 110 kV and 0-8 p.f. lagging, calculate: (i) sending end power factor (iii) transmission efficiency (ii) percentage regulation |() 0-798 lag (ii) 10% (iii) 96-38%

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Consider the 500 kV, three phase bundled conductor line as shown in the figure below. Find the line to neutral capacitance. 0.5 m 30 mm (0) (O to Ine 15 m 15 m
An overhead 3-phase transmission line delivers 6000 kW at 32 kV at 0-6 p.f. lagging. The resistance and reactance of each conductor is 5 Q and 8 2 respectively. Determine: (i) sending end voltage (ii) percentage regulation (ii) transmission efficiency. A Focus
The 13.2 kV 50-Hz generator feeds a load over a line with (Zload) impedance Zline. Load is 800n + j500n and impedance of the line is 20 + j300 a) If the generator is directly connected to the load as given in (a), what will be the line losses? b) If the generator is connected to the load using step-up and step-down transformers as given in (b), what will be the line losses? c) How much is the increase in efficiency compared to (a) from (b)? Zline 2. (a) 1:10 10:1 Zline Tr Tr2 (b) Zload Zload
An overhead 3-phase transmission line delivers 6000 kW at 32 kV at 0-6 p.f. lagging. The resistance and reactance of each conductor is 5 ohm and 8 ohm respectively. Determine: (i) sending end voltage (ii) percentage regulation (iii) transmission efficiency.
A short single phase transmission line has a loop impedance of (0.2+j1.2) ohm. At what leading power factor the voltage regulation will be zero ?
In the following network, the voltage magnitudes at all buses are equal to 1 p.u., the voltage phase angles are very small, and the line resistances are negligible. All the line reactances are equal to j1 p.u. (1) (2. P₂ = 0.1 p.u. P3 = 0.2 p.u. The voltage phase angle 83 in radian at bus 3 is (Assume one of the generator bus as slack bus and sin-¹ (0.1) = 0.1 rad) (a) -0.1 (b) -0.2 (c) 0.1 (d) 0
Problem 1 a- Explain the meaning of the term "bundle conductor transmission line" and discuss the effects of its use on the electrical performance of a high voltage electric transmission line. b- Consider an experimental 1800 kV three phase bundle-conductor line with parameters A= 0.95 and B=j 70. Determine the value of the parameter C of the line. Assume that the line is delivering 2,000 MVA at receiving end whose voltage of 1750 kV and unity power factor. Determine the sending end voltage of the line. d- C- Determine the sending end current of the line.
A three-phase symmetrical double circuit line is arranged in a horizontal plane as shown in figure below. Calculate and derive an expression for the transposed line for the inductance. Assume balanced equally distributed loads
A single phase transmission line delivers 1500 kW at 33 kV at 0.8 p.f. lagging. The total resistance and inductive reactance of the line are 10 2 and 15 2 respectively. Determine (i) sending end voltage (ii) sending end p.f. and (iii) efficiency of transmission.
The one-line diagram of a power system is shown in the figure below. The 3-ph load is composed of three 4.8-0 capacitors in delta connection. The motor draws 50 MW, 0.6 power factor lagging at 20 kV. Use a base of 100 MVA, 20 kV in the generator circuit. Determine the generator and motor internal emfs and the transmission line current. Line M 3-ph Load The three-phase power and line-line ratings are given below: X = 24% 22 kV 22/110 kV G: 80 MVA T1:40 MVA X= 6.4% X= 42.35 Q X = 22.5% Line: 110 kV M: 68.85 MVA 20kV The three-phase ratings of the three-winding transformer T2 are: Y-connected 110 kV Primary: Secondary: 40 MVA, Y-connected 25 MVA, 22 kV Tertiary: A-connected 15 MVA, 4.4 kV Neglecting resistance, the leakage impedances are: 110 kV Zps = 9.6% Zpt = 7.2% Zst = 10% 40 MVA, 40 MVA, 25 MVA, 110 kV 22 kV %3D
8:13 O O all 83 moodle.nct.edu.om/mod/q 2 P Flag question In a three phase overhead system , each line is suspended by a string of three insulator. The voltages across top unit and the middle unit are 8kV and 23kV respectively. Calculate a) Ratio of shunt capacitance to self capacitance b) Line voltage c) String efficiency. Ratio of shunt capacitance to self capacitance (K) Voltage across the the line insulator (V3) Phase Voltage (Vphase) Line voltage (VL) String Efficiency + II
The Power transfer capability of transmission line is most affected by: it) shunt conductance b) capacitance c) Resistance. d) inductance