4.* Steam enters a turbine steadily at 10 MPa and 550°C with a velocity of 60 m/sand leaves at 40 kPa with a quality of 85 percent. A heat loss of 30 kJ/kg occurs during theprocess. The inlet area of the turbine is 150 cm², and the exit area is 1400 cm². Determine;a) the mass flow rate of the steam,b) the exit velocity,c) the power output.

Answered: Image /qna-images/answer/2fef1278-28dc-4dc7-927d-66dac7285762.jpg

4. Steam enters a turbine steadily at 10 MPa and 550°C with a velocity of 60 m and leaves at 40 kPa with a quality of 85 percent. A heat loss of 30 kJ/kg occurs during t process. The inlet area of the turbine is 150 cm², and the exit area is 1400 cm². Determin a) the mass flow rate of the steam, b) the exit velocity, c) the power output.

4. Steam enters a turbine steadily at 10 MPa and 550°C with a velocity of 60 m and leaves at 40 kPa with a quality of 85 percent. A heat loss of 30 kJ/kg occurs during t process. The inlet area of the turbine is 150 cm², and the exit area is 1400 cm². Determin a) the mass flow rate of the steam, b) the exit velocity, c) the power output.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Air initially at 15 psia and 60 deg. F is brought to a final temperature of 200 deg. F by a reversible non-flow process in each case and find the work required in Btu/lb if a) n = 0; b) n = infinity; c) n = 1.2; d) n = k
3. Nitrogen gas @ 90° F (MW=28) goes through a compressor, increasing its pressure from 10 psi to 65 psi. The temperature remained constant throughout. Determine the work in Hp for a steady flow process; AKE=0, APE=0; mass flow rate of nitrogen is 2 Ibm/min.
A fluid at 700 kPa, with a specific volume of 0.25 m³/kg and a velocity of 175 m/s, enters a device. Heat loss from the device by radiation is 23 kJ /kg. The work done by the fluid is 465 kJ /kg. The fluid exists at 136 kPa, 0.94 m³/kg, and 335 m/s. Find the change in internal energy, in kJ/s.
4*. Steam at 2 MPa and 450° C enters an isentropic nozzle with a velocity of 10 m/s and exits at 1.5 MPa. The mass flow rate is 0.2 kg/s. Calculate: a) The exit temperature. b) The velocity of the steam at the exit of the nozzle. c) The area at the exit of the nozzle.
An air enters a compressor at 120 kPa, 20 C with volume flow rate of 10m^3/min. It then exits the compressor at 1.5Mpa and 145 C. Calculate the power input to drive the compressor (under steady state) when heat transfer from the compressor is 2 kW.
Q2) Air al 283K and 0.08 MPa enters the diffuser of a jet engine steadily with a velocity of 200 m/s. The inlet arca of the diffuser is 0.4 m2. The air leaves the diffuser with a velocity that is very small compared with the inlet velocity. Determine: a) The mass flow rate of air. b) The temperature of the air lecaving the diffuser.
2. A steady stream of steam passes through a turbine. The steam inlet conditions are 10MPa, 450°C and 80m/s and at the outlet they are 10kPa, 92% quality and 50m/s. The mass flow of the steam is 12 kg/s. Determine a) the change in kinetic energy, b) the power developed by the turbine, and c) the area of the turbine inlet.
a.Find the quality of the moisture of the exhaust steam. b.Determine the non-flow work, and the steady flow work
Do all parts in detail
20. A certain gas steadily flows through a engine at constant temperature of 400 K. The exit pressure is one-third of inlet pressure of 2.07 kg/cm². If AP = 0, AK = 0, the work of steady flow is, a-126 b-128 c 128 d 126
Air initially at 15 psia and 60 deg. F is brought to a final temperature of 200 deg. F by a reversible non-flow process in each case and find the work required in Btu/lb if a) n = 0; b) n = infinity; c) n = 1.2; d) n = k