Solutions pls 4. For a normally consolidated clay, the following values are given.k (cm/sec)0.45 x 10e0.781.10.88 x 106Estimate k at a void ratio of 0.97Ans. 6.9089 x 105. The following data are for a falling-head permeability test:Length of the soil sample = 400 mm

Answered: Image /qna-images/answer/ba9b0c25-6dc5-4a19-8c63-48b007442804.jpg

Answered: 4. For a normally consolidated clay,…

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter7: Permeability

Section: Chapter Questions

Problem 7.18P

See similar textbooks

Similar questions

Permeability tests were performed on a soil sample, under different void ratio and different temperatures and the following results were obtained. Test No. 1 2 Void ratio (e) 0.65 1.02 Temperature °℃ 25° 40⁰ Estimate the coefficient of permeability at a temperature of 20°C for a voids ratio of 0.80. Given the following physical properties of water: At 20°C, n = 10.09 × 10+ and p„ = 0.998 g/cm³ At 25°C, n = 8.95 × 104 g sec/cm² and p k(cm/s) 0.4x10 1.9x10-¹ At 40° C, n = 6.54 × 10-¹ g sec/cm² and p $0.997 g/cm³ = = 0.992 g/cm³
Permeability tests were performed on a soil sample, under different void ratio and different temperatures and the following results were obtained. Test No. 1 2 Void ratio Temperature °C (e) 0.65 1.02 25° 40⁰ Estimate the coefficient of permeability at a temperature of 20°C for a voids ratio of 0.80. Given the following physical properties of water: At 20°C, n = 10.09 × 10+ and p„ = 0.998 g/cm³ At 25°C, n = 8.95 × 104 g sec/cm² and p k(cm/s) 0.4x10 1.9x10¹ At 40° C, n = 6.54 × 10 g sec/cm² and p 8 0.997 g/cm³ = 0.992 g/cm³
49. The following data are given for the laboratory sample. o = 175 kPa; e = 1.1;o+Ao = 300 kPa; e = 0.9 If thickness of the clay specimen is 25 mm, the value of coefficient of volume compressibility is x 10-4 m²/kN A. 3x10-3 m²/kN B. 5x10-6 m²/kN C. 12x10-4 m²/kN D. 7.61×10-4 m²/kN
PROBLEM No. 4 A sample of dry sand having a unit weight of 17.50 kN/m³ and a specific gravity of 2.69 is placed in the rain. During the rain, the volume of the sample remains constant but the degree of saturation increases to 45%. Determine the following: The void ratio of the sample in percent. b. The unit weight of the sample after being in the rain. The water content of the sample after being in the rain. a. С.
49. The following data are given for the laboratory sample. o=175 kPa; e = 1.1; +Ao = 300 kPa; e = 0.9 If thickness of the clay specimen is 25 mm, the value of coefficient of volume compressibility is x 10-4 m²/kN A. 3x10-³ m²/kN B. 5x10-6 m²/kN C. 12x10-4 m²/kN D. 7.61×10-4 m²/kN
The results of a constant head permeability test for a fine sand are as follows: Diameter of the sample = 31 cm Length of sample = 98 cm Constant head difference = 52 cm Time of collection = 364 secs Weight of water collected = 448 grams Find the seepage velocity in cm/min. if the void ratio is 0.33. Round off to four decimal places. Answer: 0.3943
The following results were obtained from an oedometer test on a specimen of saturated clay: 54 107 214 429 214 107 54 27 Pressure (kPa): 1.024 1.012 1.001 0.994 1.068 1.144 1.217 1.243 Void ratio: A layer of this clay 8 m thick lies below a 4 m depth of sand, the water table being at the surface. The saturated unit weight for both soils =19 kN/m3=19 kN/m3. A 4 m depth of fill, unit weight =21 kN/m3=21 kN/m3, is placed on the sand over an extensive area. Determine the final settlement due to consolidation of the clay. If the fill were to be removed some time after the completion of consolidation, what heave would eventually take place due to swelling of the clay?
Estimate the vertical coefficient of permeability for a uniform clay deposit where representative test results are as shown: LL = 92, PL = 34 percent of clay size particles in the soil =40 void ratio ( approximate ) = 1.75
A soil profile is shown in Figure P3.3 along with the standardpenetration numbers in the clay layer. Use Eqs. (3.8b)and (3.9) to determine the variation of cu and OCR withdepth. What is the average value of cu and OCR?
Q # 1. Organic soils are typically characterized by high void ratio, low specific gravity, and high compressibility. Following are the results of a consolidation test on a sample of organic soil. Pressure, o (kN/m2) Change in dial reading, AH (mm) 0.284 12 0.150 24 0.315 48 0.564 100 0.823 200 2.25 400 5.34 Given that the initial height of the specimen = 20.6 mm, mass of dry specimen = 12 g, area of specimen = 31.67 cm2 and G, = 2.49. Plot the e, log o' curve. b. Determine the preconsolidation pressure. a.
A sample of saturated clay was placed in a container and weighed. The weight was 6N. The clay in its container was placed in an oven for 24 hours at 105˚C. The weight reduced to a constant value of 5N. The weight of the container is 1N. If Gs = 2.7, determine: a) Water Content b) Void Ratio c) Bulk Unit Weight d) Dry Unit Weight e) Effective Unit Weight
Subject: Soil Mechanics Please provide a solution and a diagram For a laboratory consolidation test on a clay specimen (drained on both sides) the following results were obtained: Thickness of clay soil= 25 mm; P_1 = 50 kPa; P_2 = 120 kPa; e_1 = 0.92; e_2 = 0.78; Time for 50% consolidation= 2.5 min. Tv = 0.197. Determine the hydraulic conductivity of the clay for the loading range in m/min. a. 1.081 x 10^-3 b. 2.56 x 10^-2 c. 1.31 x 10^-7 d. 1.23 x10 ^-5

SEE MORE QUESTIONS

Recommended textbooks for you

Principles of Geotechnical Engineering (MindTap C…

Civil Engineering

ISBN:

9781305970939

Author:

Braja M. Das, Khaled Sobhan

Publisher:

Cengage Learning

Principles of Foundation Engineering (MindTap Cou…

Civil Engineering

ISBN:

9781305081550

Author:

Braja M. Das

Publisher:

Cengage Learning

Fundamentals of Geotechnical Engineering (MindTap…

Civil Engineering

ISBN:

9781305635180

Author:

Braja M. Das, Nagaratnam Sivakugan

Publisher:

Cengage Learning

Principles of Geotechnical Engineering (MindTap C…

Civil Engineering

ISBN:

9781305970939

Author:

Braja M. Das, Khaled Sobhan

Publisher:

Cengage Learning

Principles of Foundation Engineering (MindTap Cou…

Civil Engineering

ISBN:

9781305081550

Author:

Braja M. Das

Publisher:

Cengage Learning

Fundamentals of Geotechnical Engineering (MindTap…

Civil Engineering

ISBN:

9781305635180

Author:

Braja M. Das, Nagaratnam Sivakugan

Publisher:

Cengage Learning

Principles of Foundation Engineering (MindTap Cou…

Civil Engineering

ISBN:

9781337705028

Author:

Braja M. Das, Nagaratnam Sivakugan

Publisher:

Cengage Learning

SEE MORE TEXTBOOKS

4. For a normally consolidated clay, the following values are given. k (cm/sec) 0.45 x 10 0.78 I. 1.1 0.88 x 106 Estimate k at a void ratio of 0.97 Ans. 6.9089 x 10