4) A city with an expected increase in its future population is to provide a complete water treatment plant for surface water source, including rapid filtration and chlorination. The design flow is 22.5 MGD assuming alus is used for coagulation the approximate area of the a) is closest to 10000 ft² b) jis closest to 20000 ft c) depends on the dosage of alum d) depends on the quality of water source

4) A city with an expected increase in its future population is to provide a complete water treatment plant for surface water source, including rapid filtration and chlorination. The design flow is 22.5 MGD assuming alus is used for coagulation the approximate area of the a) is closest to 10000 ft² b) jis closest to 20000 ft c) depends on the dosage of alum d) depends on the quality of water source

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The wastewater to be treated is flowing into the treatment plant at a rate of 2670 m3/day. The dosage of chlorine used for disinfection is 15 mg/l and its disinfection model is given as Nt=Noe-0.145t. Calculate the volume of disinfection tank necessary to kill 98% microbes.
WASTEWATER ENGINEERING: A wastewater sample has 7.5 x 105 CFU per liter. The allowable fecal coli form concentration is 3500 CFU/L. What should be the length of carrying this wastewater if the flow velocity of the wastewater is 0.75 m/s and the reaction rate constant of decomposition of fecal coliform is 0.24 min-1.
9- If the average daily water consumption of a city is 32000 m/day, the peak hourly demand will be: A- 1000 m/hr B- 1500 m/hr C- 2700 m/hr D- 3600 m³/hr
A trickling filter with a volume of 250 m3 is used to treat wastewater with flowrate 30,000 m3/d and BOD5 of 130 mg/L. The OLR in peak conditions is 1.6 times that of average conditions. Calculate the required oxygen supply per unit mass of BOD.
An effluent at flow rate of 2760 m3/day is to be treated. The dosage of chlorine is 15 mg/lt and the disinfction model is Nt=Noe-0.145t. Determine the volume of disinfection unit required to kill 98% microbes.
We have a 20 meter long pipe for sewage transfer. If the mass percentage of solids in the effluent is 0.5%, calculate the minimum slope of the pipe so that the solid does not settle in the pipe.
A city discharges 100 cumecs of sewage into a river, which is fully saturated with oxygen and flowing at the rate of 1500 cumecs during its lean days with a velocity of 0.1 m/sec. The 5-days BOD of sewage at the given temperature is 280 mg/l. Find when and where the critical D.O. deficit will occur in the downstream portion of the river, and what is its amount. Assume coefficient of purification of the stream (f) as 4.0, and coefficient of deoxygenation (KD) as 0.1.
DA septic tank of 7 m³ in volume serves for 5 people. If the rate of accumulation of sludge is 70 litres per capita per year and sludge is removed when it occupies 50% of its volume, what is the cleaning interval of septic tank? (b) 5 years (d) 10 years (a) 3 years (c) 7.5 years
A city has a population of 100000 with an average rate of demand of 160 litres per head per day. What is the actual number of filters required if the size of each filter is 9 m x 5m? Assume the average filtration rate as 4500 litres per hour per m². (a) 1 (c) 4 (b) 2 (d) 5
Wasterwater Engineering Civil engineering
The density of water at 4°C is 1000 kg/m3 at atmosphericpressure. The gravity acceleration constant (g) is 9.81 m/s2. Thespecific gravity of an industrial wastewater (SGww) is 1.32. Whatis the specific weight of this wastewater?
Biological waste water treatment is the exclusive territory of microorganisms, higher organisms such as animals and plants are not capable of treating wastewater. 1.True 2.False