2a.Name three drawbacks of a digital system over an analog systems
Q: K 1. Compared to analog systems, digital systems p a. are less prone to noise b. can represent an…
A: Compared to analog systems ,digital systems are :
Q: Q5/ What is the impulse response of a system whose transfer function is that of pulse function? Q5/…
A: Solution: Since after t=4 the impulse response is zero and below 0 also, the function is zero.…
Q: 2a. If a computer runs at 12.8 GHz, what is the period of its clock signal? 2b. If the period…
A: There are two questions given: 2a. In this the computer runs at 12.8 GHz and with this we have to…
Q: 1. Compared to analog systems, digital systems p a. are less prone to noise b. can represent an…
A: Analog system uses sine waves whereas digital system uses square waves. They also differ in many…
Q: If digital machines accept inputs in digital format and produce output in digital format, why do we…
A: Digital circuits are made from analog parts. The real world is analog. The outputs from your…
Q: One Picoseconds (PS) is equivalent to a. 10-3 s b. 10-6 s c. 10-9 s d. 10-12 s
A: One Picoseconds (PS) is equivalent to
Q: 1. What is the length of a second in milliseconds (ms)? a) In a second, how many microseconds (s)…
A: There are 1000 millisecond(ms) in a second.
Q: 4 x 4 decoder possible?
A: Decoder : Decoder is a combinational circuit that has ‘n’ input lines and maximum of 2n output…
Q: 1. If binary data are transferred on a USB at the rate of 480 million bits per second (480 Mbps),…
A: Answer :- Given that, If binary data are transferred on a USB at the rate = 480 Mbps transfer…
Q: 18.a. Which types of multimode fibers were developed to be used specifically with laser…
A: As per company guidelines we are suppose to answer only 1 question. Kindly re-post other…
Q: Question 2 a) Assume a digital to analog conversion system uses a 10-bit integer to represent an…
A: Calculate the number of levels , for a 10 bit system, the number of levels are N=2n N=210 N=1024…
Q: 2. Is the 8086/8088 TTL-compatible? Explain your answer. A. Yes and no. The current drive of a logic…
A: 1) TTL(Transistor-Transistor Logic). is circuits built from bipolar transistors to achieve…
Q: 1 + 5 4 6. 2+ 32 O I-
A: To obtain the correct value of the expression we will have to take care of operator precedence and…
Q: The process of designing the multichannel system consists of five consecutive steps. Select one: a.…
A: The statement given:- There is five consecutive steps in the process of designing the multichannel…
Q: 1) A transmission that generally involves dedicated circuits. i. simplex ii. half duplex iii.…
A: Computer network: A computer network is a group of systems or nodes that communicate with each other…
Q: How is power computed in DC and AC systems? Clearly describe the formula used. How can you convert…
A: Calculating the Electric Power Formula in AC & DC Circuits Power Formulas in DC Circuits P = V…
Q: Why we are preferring digital system over analog system
A: We need to tell above why we prefer digital systems over analog systems. As we all know that digital…
Q: ASK, PSK, FSK, and QAM are examples of digital-to-analog conversion. Explain?
A: Given that: The topic is about ASK, PSK, FSK, and QAM are examples of digital-to-analog conversion.
Q: 268. The bit rate for 1000 baud, FSK, baud rate would be a. 1000 bps b. 1500 bps c. 2000 bps d. 100…
A: your question is The bit rate for 1000 baud, FSK, baud rate would be a. 1000 bps b. 1500 bps…
Q: What is the main part in a simple digital system and explain each parts?
A: The Solution There are the following main parts of the modern computer system: memory.…
Q: voice messages work in the 700 high frequency of 10 kHz and low frequency of 2 kHz and 10 video…
A: Ans
Q: Question 17 If a computer has clock period = 500 ps, then its clock rate = ___ GH. 1/(0.5*10 -12)…
A: Given: Clock period = 500ps Requirement: Find the clock rate in GH.
Q: The transmission that is used without the timing signal is called a. synchronous b. asynchronous c.…
A: Given that: The transmission that is used without the timing signal is called
Q: 2. Determine the output C for the system represented by the figure below. R₁ G₁ H₁ R₂ R₂ H₂ G₂
A: ans is given below
Q: Question 45 What type of sequential circuit systems coordinate signals and control data movement? O…
A: Synchronous sequential circuits are digital sequential circuits in which the feedback to the input…
Q: What is a difference between Digital and Analog System? Give Suitable Examples.
A: Both the systems are used in transmitting the signals from one end to another. Differences between…
Q: The subsequent Communication Channel's Pros and Cons Simple Half-Duplex, full duplex
A: Transmission mode introduction in computer networks: There are three different transmission modes…
Q: most efficient and commonly used digital to analog conversion
A: The most efficient and commonly used digital to analog conversion mechanism is QAM ASk: Amplitude…
Q: 5. Convert the nfa defined by 8(qo, a) = {qo,q1} 8(q1, b) = {q1, q2} 8(q2, a) = {q2} 8(q1, A) =…
A:
Q: If digital machines receive digital inputs and output digital outputs, why do we provide our…
A: Digital circuits are made from analog parts. The real world is analog. The outputs from your…
Q: Q.3 a) Four EPROMS are connected together, each one has 11 address input and 8 data outpu. What is…
A: a) Memory of EPROM = 2^(input) * output Here we have 4 inputs , hence Memory = 4* 2^inputs *…
Q: 2. A microwave system requires a +10 dBm audio level to provide 100% modulation. Determine the…
A: microwave system requires a +10 dBm. Determine the voltage level required to produce a +10 dBm level
Q: Which of the following is true regarding PAL and PLA? a) O PAL and PLA both have a fixed AND…
A: Hello Student. Warm welcome from my side. Hope you are doing absolutely great. I will try my best to…
Q: One Picoseconds (PS) is equivalent to a. 10-3 s b. 10-6 s c. 10-9 s d. 10-12 s
A: Ans-: option (d) - 10-12 s
Q: Digital Computer Logic CSE200 Instructions: Date: 07-04-21 Attempt all questions. Q.1.(a) Briefly…
A: difference is an given below : BASIS FOR COMPARISON ANALOG SIGNAL DIGITAL SIGNAL Basic…
Q: (b) The implementation of Internet of Things (IoT) has enabled better engagement of users to the…
A: It is defined as the network of physical objects i.e., “things” that are embedded with sensors,…
Q: # 7. Find the angular а. 2 s b. 2.3 mS c. 80 μ S
A: Angular velocity = 2*pi*FrequencyW = 2*pi*fThis formula uses 1 Constants, 1 Variables Constants…
Q: What's been identified as a common objective in wiring systems for computer equipment? A. Interrupt…
A: Introduction :We have to identify the common objective in wiring systems for computer…
Q: Q#5 1. Name two functions that the digital computer can perform when used with feedback control…
A: 1.Two functions that the digital computer can perform when used with feedback 2.three advantages of…
Q: (b) The implementation of Internet of Things (IoT) has enabled better engagement of users to the…
A: A The Internet of Things (IoT) is changing how we live, work, travel, and do business. It is even…
Q: The digital signals can be represented by : a) Binary Codes b) 0 and 1 c) High and Low d) All of…
A: Here have to determine digital signals can be represented by whom.
Q: Why do we feed our present digital machines inputs in analog format while digital machines receive…
A: Given: A signal is a current, either electromagnetic or electrical, that is used for the purpose of…
Q: esign 1 b
A: Step 1: ALU is a one-bit operation.The digital function that performs micro-operations on data…
Q: 7. The devices that convert serial to parallel and parallel to serial are called? a)…
A: As per our guidelines we are supposed to answer first 3. Kindly repost other questions separately.…
Q: Compare Analog versus Digital systems.
A: Both digital and analog systems are used to relay audio/video signals from one location to another.…
Q: what is the value of 1 Gigabit per second to Megabytes per second
A: 1 Gigabit per second is 1000 Megabit per second, Since 1 Gigabit is 10^9 bits, Megabit is 10^6 bits.…
Q: Assume that the fundamental clock frequency( between X1 and X2 ) is 20MHz, the resulting PCLK…
A: Answer : As PCLK frequency in 8284 is 1/6 of the frequency at EFI . Frequency at EFI is thrice that…
Q: How do transformers know the sequence of input? A. Sequential memory B. Network topology C.…
A: The Transformer model is the evolution of the encoder-decoder architecture. Encoder-decoder…
Q: X-ray, MRI, and ultrasound systems in hospitals are examples of analog systems. True False
A: EXPLANATION: X-ray is basically the high energy that is of a penetrating nature and involves…
Q: I. Draw the block diagram of a computer system showing 4 main blocks
A: As per our policy we can only solve one question when the questions are not sub questions and…
Step by step
Solved in 4 steps
- If you need to design a system for transmitting the output of a minicomputer to a line printer operating at a speed of 30 lines/sec over a voice grade telephone line with a bandwidth of 3 kHz. Assume that the line printer needs 16 bits of data per character and prints out 50 characters per line. What should be the minimum S/N to proceed this transmission?89. Communication circuits that transmit data in both directions but not at the same time are operating in a. a simplex mode b. a half duplex mode c. a full duplex mode d. an asynchronous modeDefine clock skew.
- Draw a state diagram of a High Level State Machine that describes the operation of a pulse generator. The generator should produce a pulse 10 clock cycles long, and pulse when an input goes high. Draw the state diagram of a High Level State Machine that describes the operation of a light sequencer for a traffic light. Green should be on for 100 clock pulses, yellow for 20 clock pulses, and red for 70 clock pulses, for this particular street direction. Assume a slow clock (0.25 seconds to 1 second per pulse). What would the opposing street traffic light requirements need to be? Design a High Level State Machine for a paid parking system, such as the one found at Minneapolis-St. Paul Airport. The system will take your credit card when you drive in, record the number and insure it is valid, and then when you depart it uses the same credit card and time stamp to determine how much to charge you.The original IBM specifications for VGA specified a pixel clock speed of 25.175 MHz. What is the period (time for one clock cycle) of this clock? Express your answer in microseconds (μs) with 5 significant figures. Hint: The period is given by T = 1/f. Think about units and use a formula to convert as necessary.Describe the Lamport's clock in contrast to the physical clock.
- • A circuit that controls a given digital system has three inputs: X₁, X₂, and X3. It has to recognize three different conditions: • Condition A is true if x3 is true and either x₁ is true or x₂ is false • Condition B is true ifx, is true and either x₂ or x3 is false • Condition C is true if x₂ is true and either x, is true or x3 is false • The control circuit must produce an output of 1 if at least two of the conditions A, B, and C are true. Design the simplest circuit that can be used for this purpose. A=X3(x₁+x₂) = X3X₁ + X3X2 B = x₁(x₂ + x3) = X₁ X₂ + X₁ X3 C = x₂(x₁+x3) = X₂X₁ + X₂ X3 f = AB + AC + BC = x₁(x3 + x₂)Question 2 a) Assume a digital to analog conversion system uses a 10-bit integer to represent an analog temperature over a range of -15°C to 100°C. If the actual temperature being read was 39°C, what would be the closest possible value that the system could represent?Define Clock cycles.
- 7. Draw a single symbol for the entire MIPS register file used in the book. Label all inputs and outputs meaningfully, and indicate how many wires connect to each input or output. 8. Draw all the gates in a 4x2 multiplexer. Label all inputs and outputs meaningfully.Digital Computer Logic CSE200 Instructions: Date: 07-04-21 Attempt all questions. Q.1.(a) Briefly discuss the difference between an analogue and a digital signal. 02 Q.1.(b) What do you mean by positive and negative logic? Determine the period of the digital waveform and the frequency of the waveform in the following figure. MM=12 02 V t(msec) 3 5 7 9 11 13 I5 17 Q.2.(a) What do you mean by data transfer? Briefly discuss different methods of data transfer. 02 Q.2.(b) Solve the followings. (i) Convert the (B3)16 and (101101.1), into decimal number. (ii) Write the gray and excess three code of (10110), 02 Q.3.(a) What is Boolean algebra? Briefly discuss its importance in digital electronics. 01 Q.3.(b)(i) Draw the logic circuits represented by each of the following expressions. 1.5 (а) АВ + С (b) АВ + АВ (с) АВ + CD www Q.3.(b)(ii) Write the Boolean expression for each of the logic circuits. 1.5 A A D-A 4.0 MHz clock signal is connected to the inputs of a 12-bit and a 16-bit counter. Each starts counting from zero. How long does it take before each reaches its maximum value?
