290 300 280 270 260 250 Qs: A lossless transmitting (Antenna 1) and receiving (Antenna 2) antennas operating at 1 GHz with gains of 20 dB and 15 dB, respectively, are separated by a distance of 1 km. The radiation intensity and the antennas arrangement are shown in Fig. 1. Find the maximum received power when the transmitted power is 150 W? 310 240 320 330 230 220 340 210 200 Antenna 1 350 O 10 232222 1 2.7 2.4 2.1 1.8. 1.9 11/2 6.9 0.6 0.3 20 30 190 180 170 160 40 50 60 70 80 90 100 110 0 150 140 130 ¹20 R=1 Km Fig.1 70 80 90 100 60 110 50 120 40 130 140 30 150 20 160 Antenna 2 10 0 350 2 11.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 170 180 190 340 330 200 320 210 310 220 300 230 290 280 270 260 250 240

290 300 280 270 260 250 Qs: A lossless transmitting (Antenna 1) and receiving (Antenna 2) antennas operating at 1 GHz with gains of 20 dB and 15 dB, respectively, are separated by a distance of 1 km. The radiation intensity and the antennas arrangement are shown in Fig. 1. Find the maximum received power when the transmitted power is 150 W? 310 240 320 330 230 220 340 210 200 Antenna 1 350 O 10 232222 1 2.7 2.4 2.1 1.8. 1.9 11/2 6.9 0.6 0.3 20 30 190 180 170 160 40 50 60 70 80 90 100 110 0 150 140 130 ¹20 R=1 Km Fig.1 70 80 90 100 60 110 50 120 40 130 140 30 150 20 160 Antenna 2 10 0 350 2 11.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 170 180 190 340 330 200 320 210 310 220 300 230 290 280 270 260 250 240

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A point-to-point propagation 2.45 GHz with a transmitting antenna (15 dB gain) and a receiving antenna (5 dB). Both antennas are separate with distance 500 m. Determine its power received (dBm) if the transmitting antenna input is 50 W. If both transmitter and receiver antennas change same type new directional antenna with unknown gain, and the power received is 5 mW. Find the gain of the new antennas?
4. short answers a. What is the effective antenna area of an antenna at 2500 MHz, if the gain is 13 dBi. b. For a WCDMA handset with 7 dB noise figure and 5 MHz effective noise bandwidth, calculate the noise floor in dBm. c. An NBA basketball player is close to 2 meters tall, and an “Umpa-Lumpa” from the movie “Willie Wonka” is 0.5 meters tall. Assuming 2-ray propagation model, what is the ratio of the signal strength received by the two people? d. Consider a 12-km microwave link with 15 meter towers at both ends, calculate the minimum frequency in GHz, such the first Fresnel zone does not intersect the ground? Assume that the ground is flat between the towers.
The radio path (f = 900 MHz) between a mobile phone and the base station has a loss of 30 dB in addition to the free space loss. The base station measures the level of the signal transmitted by the phone, and it sends the phone a command to set the transmit power to a level, which gives a received power level of-90 dBm. The antenna gain of the phone is 2 dB and the receive gain of the base station antenna is 7 dB. The distance between the phone and the base station is 500 m. What will be the transmit power level of the phone?
1. The relationship between antenna efficiency and radiated power A. no relation B. Direct proportion C. Reverse fit D. No relation 2. At log-periodic antenna, if the frequency band increased then the number of element will be: A. Increased B. Decreased C. Not effected D. equally 3. At helical antenna the input resistance affected by increase the operating frequency. A. Increases B. Decreases B. equally D. not effected 4. If the diameter of isotropic antenna is 5cm and wavelength is 10 cm, then the far-field region is: A. 10 cm B. 5 cm C. 5m D. 10 m 5. The axial ratio of helix antenna is 1.1, what is the number of turn at twice the axial ratio? A. increases B. Decreases C. not affected C. equally
A broadcast transmitter produces about 2.8 KW in the sidebands when modulated at a level of 75%.a.) how much carrier power does the transmitter have under those conditions?b. how much increase in antenna current would result by the 75% modulation if the antenna resistance is 50 ohms?
A satellite in synchronous orbit is used to communicate with an earth station at a distance of 2.2 x 107 m. The satellite has an antenna with a gain of 15 dB and a transmitter power of 3 W. The earth station uses an antenna with gain 50 dB. The frequency band is at f = 5.6 GHz. a. What is the free space path loss in dB? b. determine the received power level at the output of the receiver antenna in dBW. PLEASE PROVIDE YOUR ANSWER WITH 2 DECIMAL PLACES.
(c) Discuss two distinct ways of obtaining the practical radiation pattern of an antenna. In your explanation explain the main source of error and suggest ways of minimising the errors. An RF link, which includes transmitting and receiving antennas, operates at 10 GHz. The transmitting and receiving antennas are separated by a distance of 1 m. The transmitting and receiving antenna both have a gain of 10 dBi. If 20 dBm is fed to the transmitting antenna, determines the received power in dBm. (d)
a.What is the attenuation of 350 ft of RG-11 U coaxial cable at 100 MHz?b. A transmitter has an output power of 3 W that is fed to an antenna through an RG58A/U cable 20 ft long. How much power reaches the antenna?c. Two engineers have a disagreement over the selection of transmission line for connections within a 100m Data Centre on a project that is at risk for cost overrun. The first engineer is arguing in favor of using multi-mode fibre while the second engineer would like to use single mode fibre. You are the project engineer. Decide which of the two transmission lines to use and justify your answer.d. For typical silica optical fibres with ncore = 1.45 and Δ = 5 x 10-3, calculate nclad and NAe. For a typical silica fibre with D (@ λ = 1.3μm) = 2.5 nm ps/km and a semiconductor laser source centred on λ = 1.3μm with Δλ = 4nm: the bandwidth length BL ≈ 100 Gbps km (singlemode, step-index). What transmission speed is possible at a distance of 5km?f. A link from point a to point b is…
Assume a system has one transmit antenna and two receive antennas. The instantaneous channel attenuation at two receive antennas are 0.2j and 0.3+0.4j. The system works on an environment with only Gaussian noise and without any interference. If optimum combining is used, what are the weights for the two antennas?A) 0.2j, 0.3+0.4j B) -0.2j, 0.3-0.4j C) 0.2j, 0.3-0.4j D) -0.2j, 0.3+0.4j
An antenna used for transmitting has a power gain of 20, directive gain of 22, and an input power of 200 W. Determine: 1.EIRP in W, dBm and dBW. 2.Power density at a distance of 5 km from the antenna along the direction of maximum radiation. 3.Antenna efficiency 4. Radiated power from an antenna 5.Radiation resistance and antenna effective resistance if current at feedpoint is 2 A.
QUESTION 3 "A microwave link includes two sites that are 10 km apart and uses a center frequency of 9 GHz. On either transmitter or receiver side, a 100-m transmission line that has an attenuation per unit length of 0.01 dB/m is connected to an amplifier and a parabolic reflector antenna. Other losses caused by connectors and insertions incurred on one side amounts to 3 dB. Antenna has a power gain of 20 dB. If the output of the transmitter amplifier is 30 dBm, what is the received signal level (in dBm) at the input of the receiver amplifier? Enter numerical answer in four decimal places. No need for the unit. "
An antenna has a radiation resistance of 80 ohms, effective (ohmic) resistance of 10 ohms, directive gain of 30, and input power of 50 watts. Determine the following: Antenna Efficiency Antenna Power Gain in ratio and in dB Radiated Power in W, dBm and dBW. EIRP in W, dBm and dBW. Power density 3 km away from the antenna in the direction of maximum radiation Antenna Current