2. A reheat cycle with two stages of reheating is executed with steam expanding initially from 20 MPa and 540 °C. The two reheater pressures are 3.8 MPa and 0.97 MPa and the steam leaves each reheater at 540 °C. Condensation occurs at 60 °C. For the ideal cycle and 1 kg/sec of steam, find the following: a. Heat added b. Cycle efficiency

2. A reheat cycle with two stages of reheating is executed with steam expanding initially from 20 MPa and 540 °C. The two reheater pressures are 3.8 MPa and 0.97 MPa and the steam leaves each reheater at 540 °C. Condensation occurs at 60 °C. For the ideal cycle and 1 kg/sec of steam, find the following: a. Heat added b. Cycle efficiency

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A rankine cycle with three stages of reheating is executed with steam expanding initially from 18.111 Mpa and 540oC. The pressure of three reheaters are 4.0111 Mpa, 2.5111 Mpa and 0.98111 Mpa, and the steam leaves the first reheater at 500oC, the second 480oC. Condensation occurs at 0.4111 Mpa. Calculate W,ec, and ee.
Consider a steam power cycle operating according to the simple ideal Rankine cycle. Steam enter the turbine 4MPa pressure and 400oC and It condenses in the condenser at a pressure of 10 kPa. a)Calculate the thermal efficiency of the cycle. b)Draw the T-s diagram for the cycle.
The condensing pressure for a Rankine engine is 0.001325 MPavac. Calculate the following for steam flow rate = 1 + (200/13) kg/sec of steam when the steam at the beginning of expansion is at 119.6 deg SH and 4.0 Mpaa. Draw the TS and equipment diagrams for the ideal and actual case and find for the following for the ideal case: PV and TS diagrams of the cycle showing ideal and actual process lines Heat rejected at condenser (KJ/sec). Ans.____________________________ Mass of cooling water in kg/sec if cp H2O = 4.18 KJ/kg-K, and inlet temp of water to condenser = 20 deg C, outlet temp is 35 deg C. Ans.____________________________ Rankine engine efficiency (%). Ans.____________________________ Cycle thermal efficiency ( %). Ans.____________________________
A reheat cycle with two stages of reheating is executed, with steam expanding initially from 90 bar and 530C. The two reheater pressure are 10 bar and 0.6 bar, and the steam leaves each reheater at 480C. Condensation occurs at 0.04 bar. For an ideal cycle, find (a) QA and e. (b) For the engine, ignore the pressure drop through the reheaters, let the engine operate through the same states and compute W and e. (c) What is the steam flow rate for an engine output of 20,000kW? Answer: (a) 4657.5 KJ/kg, 44.31%; (b) 2072.6 KJ/kg, 44.41%; (c) 9.65 kg/s
Steam is delivered to turbine at 5.4 MPa and 600 degree C. Before condensation at 31 degree C, steam is extracted for feed water heating at 0.6 MPa. The turbine exhaust is 60 degree C. the required values of some state point properties are tabulated below. 10. Calculate the net work of the cycle.
In an ideal reheat cycle, the steam throttled condition is 8 MPa and 480 degree C. the steam is then reheated to MPa and 460 degree C. the turbine exhaust is 60 degree C. The required values of some state point properties are tabulated below. 5. Calculate the thermal efficiency of the cycle
Steam is delivered to turbine at 5.4 MPa and 600 degree C. Before condensation at 31 degree C, steam is extracted for feed water heating at 0.6 MPa. The turbine exhaust is 60 degree C. the required values of some state point properties are tabulated below. 11. Calculate the thermal efficiency of the cycle
A reheat cycle with two stages of reheating is executed, with steam expanding initially from 90 bar and 530°C. The two reheater pressures are 10 bar and 0.6 bar, and the steam leaves each reheater at 480°C. Condensation occurs at 0.03 bar. For the engine, ignore the pressure drop through the reheaters, let the engine operate through the same states, and compute the e in %.
In an ideal reheat cycle, the steam throttled condition is 8 MPa and 480 degree C. the steam is then reheated to MPa and 460 degree C. the turbine exhaust is 60 degree C. The required values of some state point properties are tabulated below. 4. Calculate the total turbine work of the cycle.
A reheater cycle is executed of 1 kg steam expanding initially from 12.547 Mpa and540.547 oC. The reheater pressures are 2.5547 Mpa and the steam leaves the reheaterat 420.547 oC. Condensation occurs at 0.02547 Mpa. Calculate W, ec and ee.
1. Determine the Rankine efficiency of a condensing steam turbine operating in a Rankine cycle as follows: Steam pressure - 200 psiaSteam temperature - 1000 FExhaust pressure - 2 in Hg absoluteSteam rate - 1.5 lb/kW-hr 2. If the no. 1 problem has a thermal efficiency of 30%, how many barrels of 30 °API fuel oil will be required to produce 1000 kW-hr of power. Neglect the pump work.
In an ideal reheat cycle, the steam throttled condition is 8 MPa and 480 degree C. the steam is then reheated to MPa and 460 degree C. the turbine exhaust is 60 degree C. The required values of some state point properties are tabulated below. 3. Calculate the heat input during reheating process.