11.10 A concrete pile 0.406 m x 0.406 m in cross section is shown in Figure P11.10. Calculate the ultimate skin friction resistance by using the a. a method b. A method c. ẞ method Use =20° for all clays, which are normally consolidated. 6.1 m 12.2 m 0.406 m Figure P11.10 Groundwater table Ysat Silty clay 18.55 kN/m³ Cu = 35 kN/m² Silty clay Ysat = 19.24 kN/m³ Cu = 75 kN/m²

11.10 A concrete pile 0.406 m x 0.406 m in cross section is shown in Figure P11.10. Calculate the ultimate skin friction resistance by using the a. a method b. A method c. ẞ method Use =20° for all clays, which are normally consolidated. 6.1 m 12.2 m 0.406 m Figure P11.10 Groundwater table Ysat Silty clay 18.55 kN/m³ Cu = 35 kN/m² Silty clay Ysat = 19.24 kN/m³ Cu = 75 kN/m²

Principles of Foundation Engineering (MindTap Course List)

9th Edition

ISBN:9781337705028

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter12: Pile Foundations

Section: Chapter Questions

Problem 12.13P: A concrete pile 16 in. 16 in. in cross section is shown in Figure P12.13. Calculate the ultimate...

See similar textbooks

Similar questions

A circular pile 0.45m in diameter and 15m long is embedded in a layer of dense sand. The soil has the following properties: Dry unit eight is 18 kN/m3 and saturated unit weight is 21 kN/m3 (water table is 4m below from the ground surface), Nq=85, k=1.25, tan αα = 0.45 and FS=2.5 a) Calculate the end bearing capacity b) Calculate the frictional resistance c) Calculate the allowable load
Consider a 15 m long concrete pile with a cross section of 0.45 m x 0.45 m fully embedded in sand.For the sand, unit weight, γ = 17 kN/m3 and soil friction angle, ϕ’ = 35o. Estimate the ultimate point??? with each of the following:1.1 Meyerhof’s method (Ans: 1014 kN)1.2 Vesic’s method (Ans: 1754 kN)1.3 Coyle and Castello’s method (Ans: 2479 kN)
A concrete pile 16 in. 16 in. in cross section is shown in Figure P12.13. Calculate the ultimate skin friction resistance by using the a. method [use Eq. (12.61) and Table 12.11] b. method c. method Use R=20 for all clays, which are normally consolidated.
Figure 18.26a shows a pile. Let L = 20 m, D = 450 mm. Hf = 4m, f = 17.5 kN/m3, fill = 25. Determine the total downward drag force on the pile. Assume that the fill is located above the water table and that = 0.5 fill. FIG. 18.26 Negative skin friction
A 600 mm diameter and 25 m long driven concrete pile carries a column load of 1200 kN. It is estimated that the shaft carries 900 kN and the point carries 300 kN. Determine the settlement of the pile head using the Poulos and Davis method with the following data: Es = 25 MN/m2, Ep = 30,000 MN/m2, and s = 0.2
Redo Problem 18.10 using the method for estimating the skin resistance. 18.10 A concrete pile 15 m long with a cross section of 380 mm 380 mm is fully embedded in a saturated clay layer. For the clay, sat = 18 kN/m3, = 0, and cu = 80 kN/m2. Assume that the water table lies below the tip of the pile. Determine the allowable load that the pile can carry (FS = 3). Use the a method to estimate the skin resistance.
Solve Problem 12.13 using Eqs. (12.59) and (12.60). 12.13 A concrete pile 16 in. × 16 in. in cross section is shown in Figure P12.13. Calculate the ultimate skin friction resistance by using the α method [use Eq. (12.61) and Table 12.11] λ method β method Use for all clays, which are normally consolidated.
Solve Problem 9.16 with the following: length of pile = 15 m, pile cross section = 0.305 m x 0.305 m, allowable working load = 338 kN, contribution of frictional resistance to working load = 280 kN, Ep = 21 x 106 kN/m2, Es = 30,000 kN/m2, μs = 0.3, and ζ = 0.62
A rectangular pile (0.5mx0.83m) is driven in a clayey soil arrangement composed of two different layers. The first layer has a height of 5m, cohesion of 58 kPa, friction factor of 0.84. Second layer has a height of 8m, cohesion of 76 kPa, and friction factor of 0.84. Compute the allowable load that the pile can carry if the factor it safety is 2.79.
A circular pile having a diameter of 0.33 m is 14.21 m long which is embedded in a layer of dense compacted sand having the given properties. Soil properties: Lateral pressure factor, K = 3.53 Nq = 99 Specific gravity, Gs= 2.61 Void ratio, e =1.21 Saturation above the GWT = 0.41 Ground water table (GWT) is located 3.58 m below the ground. Use unit weight of water = 9.81 kN/m3 Coefficient of friction = 0.41 Factor of safety = 3.98 Calculate the allowable capacity of the pile in kN.
In Problem 14.6, assume that Dactual = 1.3 Dtheory.a. Determine the theoretical maximum moment.b. Using Rowe’s moment reduction technique, choose a sheet-pile section. Take E = 210 x 103 MN/m2 and σall = 210,000 kN/m2.
Please help me solve3.8 The soil profi le at a site for an offshore structure is shown in Figure P13.8. The height of the pile above the sand surface is 15 m. Determine the allowable load for a driven closed-ended pipe pile with diameter 1.25 m and embedded 10 m into the stiff clay. A factor of safety of 2 is required