1.In an oedometer test a specimen of saturated clay 19 mm thick reaches 50% consolidation in 20 min. How long would it take a layer of this clay 5 m thick to reach the same degree of consolidation under the same stress and drainage conditions? How long would it take the layer to reach 30% consolidation?

1.In an oedometer test a specimen of saturated clay 19 mm thick reaches 50% consolidation in 20 min. How long would it take a layer of this clay 5 m thick to reach the same degree of consolidation under the same stress and drainage conditions? How long would it take the layer to reach 30% consolidation?

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter10: Shear Strength Of Soil

Section: Chapter Questions

Problem 10.12P

See similar textbooks

Similar questions

A standard oedometer test in the laboratory indicated that a 0.02 m thick clay specimen took 0.5 days to undergo 90% primary consolidation. How many days will a 2 m thick layer of identical clay sandwiched between sand layers and subjected to an identical stress increment take to undergo the same?
Q1- In an Odometer test a specimen of saturated clay 26 mm thick reaches 58% consolidation in 31 min. How long would it take a layer of this clay 5.8 m thick to reach the same degree of consolidation under the same stress and drainage condition? How long would it take the layer to reach 68% consolidation? What is the degree of consolidation after 2 and 28 years?
Q1- In an Odometer test a specimen of saturated clay 26 mm thick reaches58% consolidation in 31 min. How long would it take a layer of this clay 5.8 m thick to reach the same degree of consolidation under the same stress and drainage condition? How long would it take the layer to reach 68% consolidation? What is the degree of consolidation after 2 and 28 years?
In an oedometer test, a specimen of saturated clay 19 mm thick reaches 50% consolidation in 20 minutes. How long it would take a layer of this clay 5m thick to reach the same degree of consolidation under the same stress and drainage conditions? How long would it take for the clay layer to reach 30% consolidation?
The time for 75% consolidation of a 25 mm clay specimen (drained at top and bottom) in the laboratory is 22 minutes. How long will it take for a 6 m thick clay layer (same clay) in the field to undergo 55% consolidation under the same pressure increment? In the field, there is a rock layer at the bottom of the clay layer.
2. A layer of compressible clay 6m thick overlies an impervious bedrock and carries an overburden of pervious sand. A large structure founded in the sand causes the stress on every horizontal section of the clay to increase to the same value. In a standard laboratory oedometer consolidation test performed on a 19 mm thick clay specimen, the void ratio changed from 0.765 to 0.750 under a corresponding increase in stress. Consolidation was 70% complete after 30 min. In the field, a) Estimate the settlement of the structure. b) Determine the time taken for one half of the consolidation settlement to take place (Remember the lab test is for a doubly drained specimen.). c) Determine how long it takes for 50% of the settlement to take place at a depth of 0, 2, 3, 5 and 6 m of the clay stratum. d) If the clay were underlain by pervious sand, determine how long it takes for 50% of the settlement to take place at a depth of 0, 2, 3, 5 and 6 m of the clay stratum.
A 75 mm diameter clay specimen was consolidated in an oedometer under 200 kPa. At the end of consolidation, the void ratio is 0.863 and the specimen thickness is 18.51 mm. When the stress increment of 200 was added to the current vertical stress of 200 kPa, the specimen consolidated to a thickness of 17.56 mm. Assuming that the clay was normally consolidated under the vertical stress of 200 kPa, find the a) coefficient of volume compressibility in (MPa)^-1 and rounded to the 3rd decimal place.b) and the compression index of the clay rounded to the 2nd decimal place.
In an oedometer test, with half-closed drainage condition, a specimen of saturated clay 19 mm thick reaches 50%consolidation in 20 min. How long would it take a layer of this clay 5 m thick to reach the same degree of consolidation under the same stress and drainage conditions? How long would it take the layer to reach 30% consolidation?
A laboratory sample of clay 2 cm thick took 15 min to attain 60 percent consolidation under a double drainage condition. What time (in days) will be required to attain the same degree of consolidation for a clay layer 3 m thick under the foundation of a building for a similar loading and drainage condition? a.17.15 b.119 c.234 d.564.3
4) In a oedometer test a specimen of a saturated clay 21 mm thíck reaches 50% consolidation in 10 minutes. How long would it take a layer of this clay 6 m thíck under the same drainage conditions to reach 90% f consolidation under the same stress and drainage conditions? Use the following relationships between the average degree of consolidation, U and time factor, T,: U =T, for Us 50% U =1-- for U>50% No need for calculation, please write only the results.
The time required for a 50% consolidation of a 25 mm thick layer (drained at both sides) in the laboratory is 2 min and 20 sec. How long in days will it take for a 3 m thick layer of the same clay in the field under the same pressure increment to reach 50% consolidation? In the field there is a rock layer at the bottom of the clay.
The time required for 50% consolidation of a 25 mm thick layer (drained at both top and bottom) in the laboratory is 2 min 20 sec. How long in days will it take for a 3 m thick layer clay of the same clay in the field under the same pressure increment to reach 50% consolidation? In the field there is a rock layer at the bottom of the clay.