4,(1)(iv)A 33 kV, 3-phase, star-connected synchronous generatorwith synchronous impedance of 1.4 0/phase is delivering240 MW at unity power factor to a 33 kV grid.Calculate the following:The phase voltage and phase current.The voltage generated by the synchronous generator.If the excitation is increased by 25 %, then the turbine powerdriving the generator is increased till the machine delivers280 MW.Calculate the new voltage generated by the synchronousgenerator,Calculate the new current and power factor.

Given data:Line voltage= 33 kV, synchronous reactance,, Output power, P=240 MW, pf=To solve the…

(1) A 33 kV, 3-phase, star-connected synchronous generator with synchronous impedance of 1.4 2/phase is delivering 240 MW at unity power factor to a 33 kV grid. Calculate the following: The phase voltage and phase current. The voltage generated by the synchronous generator.

(1) A 33 kV, 3-phase, star-connected synchronous generator with synchronous impedance of 1.4 2/phase is delivering 240 MW at unity power factor to a 33 kV grid. Calculate the following: The phase voltage and phase current. The voltage generated by the synchronous generator.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Two identical three-phase Alternators A and B share equally a load of 10 MVA at 33 KV and 80% lagging power factor. The synchronous reactance of each generator is 4 ohms per phase and the armature resistance is negligible. Alternator A has its field excitation adjusted to carry a25 amperes at lagging power factor. What is the current delivered by Alternator B ?
2. A synchronous generator is connected to an inductive load, please draw phasor diagram to show the relationship between the internal generated voltage of the generator and the terminal voltage across the load. If the same generator is connected to a capacitive load, please draw phasor diagram to show the relationship between the internal generated voltage of the generator and the terminal voltage cross the load again. Explain the difference of the terminal voltage responses at these two types of loads.
two synchronous generators are connected in parallel, feeding a load together. the frequency of the first generator in the no-load State is 52 Hz and the slope of the characteristic is 1 MW/Hz. the total power of the load fed by these two generators is 2.5 MW and the power coefficient is 0.6 inductive. by drawing the characteristic curve of the system;a) what is the frequency of the system when the load in question is fed, and how do the two generators share the load between themselvesb) if a load of 0.5 MW is added to the system, find the operating frequency of the new system and the powers given by each generatorc) if a second load of 0.5 MW is connected to the system, the idle operating frequency of the second generator is increased by 0.5 Hz, what happens to the operating frequency of the system and the power values given by the generators
5. Two 75 MVA 3-phase alternator are connected in parallel. The speed load characteristic of the first generator is 2% from no-load to full load while that of the second alternator is 3% from no-load to full load. The machines are fully loaded when the load is 150 MVA. If the load is reduced to 80 MVA. Calculate the load carried by each machines?
Q2 Two three-phase, 6.6 kV, Y-connected synchronous generators are operating in parallel to supply a load of 3000 kW at 0.8 power factor lagging. The synchronous reactance per phase of machine A is j10 Q, while that of machine B is j12 Q (winding resistance and losses are negligible). The excitation of machine A is adjusted so that it delivers 150 A at a lagging power factor, and the governors that control the input torque of the generator prime movers are set such that the load is shared equally between the two machines. a. Determine the following for each machine: i. the armature current; ii. the power factor; ii. the excitation voltage, Ef; and, iv. the power angle. Neatly sketch a phasor diagram for machine A, taking the terminal voltage as the reference. Ensure all phasors are labelled, and all angles indicated. b.
(b) A three-phase A-connected synchronous generator is rated at 120 MVA, 10.5 kV, 0.85 PF leading and 60 Hz. Its synchronous reactance is 1.4 N, and its resistance may be ignored. Analyse the voltage regulation of this generator.
2.) A 60-MVA, 69.3 kV, 3-phase synchronous generator has a synchronous reactance of 15 ohms per phase and negligible resistance. The generator is delivering rated power at 0.8 pf leading at rated terminal voltage to an infinite bus bar. Determine the magnitude of the power angle. Subject Electrical machine 2
A three phase star connected, 1500 kVA, 13 kV alternator has an armature resistance of 0.9 ohm and a synchronous reactance of 8.0 ohms. When carrying rated load voltage, calculate the generated voltage per phase at loads of a. Unity P.F. b. 0.8 lagging P.F. c. 0.8 leading P.F. d. Calculate the voltage regulation for each loads and determine best regulation.
A generator is rated 100 MVA, 22 kV. Its Y connected windings have areactance of 1.1 per unit. Find the reactance of the winding. Then find a new per unit value of reactance of the generator for 100 MVA and 20 kV.
A synchronous generator runs at 250 rpm and generates at 50-Hz. There are 216 slots, each containing 5 conductors arranged in a full-pitched winding for 3-phase star connection. All the conductors of each phase are in series and the flux per pole at no-load sinusoidally distributed over the pole pitch is 30 mWb. Find the emf induced in each phase winding and the terminal voltage.
A three-phase synchronous generator is being used as a source of power for a farm in a remote area of Sindh. The apparent power rating of this generator is 100 KVA and the line to line voltage is 3000 V at 50 Hz. The configuration is star. When the terminals of the alternator are short-circuited, and a field current of 40 A is applied, a short circuit current of 200 A flows where when the terminals are open-circuited, with the same field current 1040 V are measured across the terminals. Calculate the voltage regulation for fully loaded conditions having the PF of both 0.8 leading as well as lagging. Use phasor diagrams. The effective armature resistance of this generator is 0.2 ohms. (Hint: Synchronous Impedance = (O.C Voltage/phase) / (S.C Current/phase))
A 9.9 kV, Y-connected, 3 phase alternator has a synchronous reactance of 8 ohms per phase and negligible resistance. At a certain field current the armature is known to induce 8.2 kV per phase. Calculate the power that can be developed by the alternator at this excitation.