Weighed quantity of dry potassium bromide 1,5560 g г (М=167,000 g/mol) dissolved in water with receiving of 250 ml of the solution. Calculate titre of this solution corresponding to arsenous acid anhydride (М=197,841 g/mol). Express numerical result with an accuracy of: Х,ХХХ.10-х

Weighed quantity of dry potassium bromide 1,5560 g г (М=167,000 g/mol) dissolved in water with receiving of 250 ml of the solution. Calculate titre of this solution corresponding to arsenous acid anhydride (М=197,841 g/mol). Express numerical result with an accuracy of: Х,ХХХ.10-х

Introductory Chemistry For Today

8th Edition

ISBN:9781285644561

Author:Seager

Publisher:Seager

Chapter9: Acids, Bases, And Salts

Section: Chapter Questions

Problem 9.102E

See similar textbooks

Related questions

Q: 3. A 0.1093-g sample of impure Na2CO3 was analyzed by the Volhard method. After adding 50.00 mL of…

A: Given , mass of impure Na2CO3=0.1093 gVolume of AgNO3= 50.00 mLConcentration of AgNO3=0.06911…

Q: The Kjeldahl method was used to determine the nitrogen content of a soil sample. 25 g soil sample…

A: Mass of soil sample = 25 g Molarity of HCl = 0.05 M Volume of acid added = 10 mL Molarity of NaOH =…

Q: 0.5131-g sample containing KBr is dissolved in 50 mL of distilled water. Titrating with 0.04614 M…

A: The reaction will be: KBr(aq) + AgNO₃(aq) → KNO₃(aq) + AgBr(s) From the reaction- 1 mole of KBr…

Q: What is the percentage of total acid expressed as acetic acid (CH3COOH) in a sample of vinegar if…

A: CH3CCOH + KOH →CH3COOK + H2O At equivalence point Number of moles of CH3COOH = Number of moles of…

Q: 1000 μl of 1M NaCl stock solution (aq). How you would perform serial dilution to obtain 10-1,…

A: in laboratory, a standard solution is prepared which is called as stock solution.the other solution…

Q: A 50.0 mL solution of Ca(OH)2 with an unknown concentration was titrated with 0.340 M HNO3. To reach…

A: Given Volume of Ca( OH)2 solution ( V1 ) = 50 mL Molarity of HNO3 ( M2 ) = 0.340 M…

Q: A 0.9600 M NaOH solution was diluted with a factor of 4. Vz= Then the diluted solution of NaOH was…

A: fullscreen

Q: An analysis was carried out to determine the purity of an aspirin sample. To hydrolyze the sample,…

Q: In the titration of 25.00 mL of a water sample, it took 19.040 mL of 4.965x 10−3 M EDTA solution to…

A: EDTA is used to measure the hardness of water Water hardness is primarily due to calcium and…

Q: Calculate the % KHP of 1.294 g sample which requires 48.25 mL of NaOH solution during the titration.…

A: Molarity of NaOH is not provided in the question. So I aassumed it to be X molar. Just put the value…

Q: A commercial vinegar was analyzed by titration to determine the percent acetic acid. Briefly, 10.00…

A: A commercial vinegar was analyzed by titration to determine the percent acetic acid. For this…

Q: Which of the following will result to an unlit light bulb when subjected to the conductivity test?…

A: A multiple choice question based on electrolysis that is to be accomplished.

Q: A mixture of pure BaCO3 and pure Na2CO3 weighs 1.000 g and has the total neutralizing power of…

Q: Which of the statements given below is correct? A. Iodometry is a method in which I2 solution is…

A: Titration: When a solution of known concentration is used to determine the concentration of an…

Q: Determine the total hardness of water (ppm CaCO3; MM: 100.09 g/mole) if 100.0mL sample of drinking…

A: Given data Volume of EDTA = 38.41 mL Molarity of EDTA = 4.65 x 10-3 M Volume of water sample = 100…

Q: Calculate equivalent weight of unknown acid using the following information: Mass of unknown acid=…

A: Given,Mass of an unknown acid = 0.1351 gVolume of NaOH used to titrate the acid = 11.5…

Q: Q1.Calculate the molarity of CH3COOH (in mol dm-3) in the sample vinegar Q2.Calculate the…

A: This is a neutralization reaction because here we are titrating an acid with a base.

Q: Average the two percentages and calculate the percentage difference. given : Concentration of…

A: Average percentage - It is the average of the two percentages.…

Q: An unknown volume of 2.50 M H,SO, was diluted to 50 mL using water The diluted solution was titrated…

A: Given: Molarity of concentrated H2SO4 solution = 2.50 M Volume of diluted H2SO4 solution = 50 mL…

Q: mass of KIO3 = 0.9290g titrated volume Na2S2O3 = 28.88mL standardisation sodium thiosulfate

Q: In the conductivity test, ________________ will result to an unlit light bulb. a. Glacial acetic…

A: In the conductivity test, glacial acetic acid will result to an unlit light bulb.

Q: 3.1 The density of a gas is 0.080 g cm, convert the density to SI unit (kg m-3) 3.2 What is the…

Q: Using the Hanus method of determination of Iodine number, what is the Iodine number for the…

A: Given that Volume.of titrant = .350 ml

Q: A Na2CO3 standard solution is prepared by transferring 2.4817 grams of primary standard-grade sodium…

A: Given that Standard solution prepared by dissolving 2.4817 g in 250 mL volumetric flask molecular…

Q: The Merck Index indicates that 10 mg of guanidine, CH5N3, may be administered for each kilogram of…

Q: ubjected to pH analysis using a pH meter, the first is analysed using 1:1 soil:water ratio and the…

Q: An analyte solution was prepared using 1.1278 g of a diprotic acid and 25.0 mL of distilled water. A…

Q: Calculate the volume in milliliters of 0.362 M KOH necessary to titrate 28.38 mL of 0.279 M diprotic…

A: Chemical reaction between KOH and H2SO4: 2KOH + H2SO4 → K2SO4 + 2H2O From…

Q: 1. A student weighed out 0.300 grams of a monoprotic acid (HA) and added 50.0 mL of DI water to the…

Q: In ending the titration of KHP, you leave a half-drop of the NaOH hanging from the tip of the buret.…

A: Let's assume after Standardization of NaOH by KHP, the estimated %CH3COOH with standard NaOH. The…

Q: A 0.5131-g sample containing KBr is dissolved in 50 mL of distilled water. Titrating with 0.04525 M…

Q: Nitric acid solutions with a pH of about 5 are often used to simulate acid rain. A nitric acid…

Q: A 0.500-g sample containing BaBr2 (FM = 297.14) is dissolved in 50 mL of distilled water. Titrating…

Q: Weighed quantity of dry potassium bromide 1,5560 gr (M=167,000 g/mol) dissolved in water with…

A: Measuring the quantity of a solution of a known concentration of titrant that is needed to react…

Q: A series of solutions containing NAOH, Na,CO, and NaHCO, alone or in compatible combination, was…

A: Answer: The table showing the volume of 0.1202 M HCl used to titrate 25.00 m of a series of…

Q: Calculations for Acetate Buffer Solutions Molarity of acetic in acetate buffer (below is…

A: Molarity = Moles of soluteL of solution Moles = Molarity x L of solution

Q: How much amount (in grams) do you need to prepare the following solutions 500.0 mL 0.1000 M stock…

A: Concept: The molarity of a solution can be calculated as the number of moles of solute divided by…

Q: A 25.0mL acetic acid sample was titrated using exactly 69.72 mL of a 0.30M sodium hydroxide solution…

Q: A sample of meat scrap weighing 2.000 g is digested with concentrated sulfuric acid and a catalyst.…

A: The answer is given below

Q: 1)A bottle of concentrated aqueous sulfuric acid, labeled 95.00 wt% H2SO4, has a concentration of…

Q: Assume that the molarity of the standardized KMnO4 solution is 0.025 M and it takes 23.00 mL to…

A: The balanced chemical equation of the reaction of KMnO4 and H2O2 is as follows: The stoichiometry…

Q: In the titration of 25.00 mL of a water sample, it took 19.040 mL of 4.965x 10−3 M EDTA solution to…

A: The problem involves only simple steps of EDTA-Ca reaction. We can calculate the number of moles of…

Q: 4,Titrate 0.5687g of solid KHP (KC8H5O4) requires 13.52 mL of an unknown NaOH solution to reach the…

Q: If a 3g sample of zinc oxide, 95% ZnO, were treated with 50ml of 1.1230N sulfuric acid in the usual…

Q: Normality is same as Molarity for sodium hydroxide and normal = molar (for NaOH) Normality of sodium…

A: In the given question we have to calculate the percent purity of naproxen ds the molecular formula…

Q: You used the back-titration method to experimentally determine the amount of CaCO3 in an Ultra…

A: Since the active ingredient of the tablet is CaCO3 And since the reaction between CaCO3 and HCl is…

Q: In the titration of 25.00 mL of a water sample, it took 20.590 mL of 3.150x 10−3 M EDTA solution to…

A: Given: Volume of water = 25.00 mL Volume of EDTA solution = 20.590 mL Molarity of EDTA solution =…

Q: A 0.5131-g sample containing KBr is dissolved in 50 mL of distilled water. Titrating with 0.04473 M…

A: The mass of sample containing KBr dissolved in 50 mL of distilled water is 0.5131 g. The volume of…

Q: Part 1: Preparation of the Primary Citric Acid Standard Mass of Citric Acid: 4.05 g Volume of…

A: The balanced Chemical Reaction between citric acid and sodium hydroxide is given in the question as…

Question

2. Weighed quantity of dry potassium bromide 1,5560 g г (М=167,000 g/mol) dissolved in water with receiving of 250 ml of the solution. Calculate titre of this solution corresponding to arsenous acid anhydride (М=197,841 g/mol). Express numerical result with an accuracy of: Х,ХХХ.10-х

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, chemistry and related others by exploring similar questions and additional content below.

Similar questions

This question is about acid base titration: Osama a student, performed an acid base titration involving a standard solution of Sodium hydroxide (NaOH) (RMM = 40) against unknown HCl solution and obtained the following results. Mass of Sodium hydroxide (NaOH) dissolved in 250 ml volumetric flask = 3.6 g 2.Volume of Sodium hydroxide used in the titration = 23 ml 3.The mean volume of HCl titrated with 25 ml Sodium…
Chem. 1A: Acid-Base titration : to determine molar mass of a diprotic ACID : H2A Put a weighing paper on the pan of balance and tare it. Then add 0.1482 g of an unknown diprotic acid. Transfer the acid to a Erlenmeyer flask add 35.0 mL. water and 4 drops phenophethaleine. The color of solution is colorless. Set up a 50.00 mL. buret: wash the buret with tap water twice, with deionized water twice and and the 0.1029 M NAOH(aq). Fill the buret with 0.1029 M NaOH(aq), remove the air bubble and adjust the initial buret reading to 0.00 mL. Put the Erlenmeyer flask containing the acid and the phenolphethaleine below the buret with 0.1029 M NAOH(aq). Add NaOH(aq) from buret to the Erlenmeyer flask containing the diprotic acid and phenolphethaleine , until the color of the solution turn to pink by adding one or two drops of NaOH(aq). Then stop adding NaOH(aq) from buret and read the final volume of NaOH(aq). Acid-base titration: buret base of known concentration + stopcock acid of unknown…
Calculate the volume in milliliters of 0.362 M KOH necessary to titrate 28.38 mL of 0.279 M diprotic sulfuric acid, H2SO4, to a phenolphthalein end-point. Report the answer to a precision of 2 decimal places.
A 50.00-mL sample of a white dinner wine required 24.57 mL of 0.03291 M NaOH to achieve a phenolphthalein end point. Express the acidity of the wine in grams of tartaric acid (H2C4H4O6; 150.09 g/mol) per 100 mL. (Assume that two hydrogens of the acid are titrated).
You are titrating a 1.033 g sample of white vinegar solution (5.0% acetic acid) with a 1.00 M NaOH titrant. At the endpoint of titration, 0.89 mL of NaOH was used. What is the mass % of acetic acid based on your experimental results? CH3COOH = 60.052 g/mol
How many mL of (6.22x10^-1) M HCOOH would it take to reach the equivalence point in the titration of (4.5900x10^1) mL of (4.680x10^-1) M KOH? Enter your answer in scientific notation with 3 sig figs. Do not include any units in your answer. Do not round any intermediate calculations. Note: Your answer is assumed to be reduced to the highest power possible. Your Answer: x10 Answer
Similar to acetic acid, propionic acid (CH3CH2COOH) is a weak acid (HA), which inhibits the growth of mold and some bacteria and also used to make pesticides and pharmaceuticals. Suppose 10.00-mL of 0.8000 M propionic acid (CH3CH2COOH), is titrated with 0.2000M NaOH. Ka for propionic acid is 1.4 x 10-5 . What is the pH after addition of 30.00 mL of NaOH to the propionic acid solution?
A 50.00-mL sample of white wine required 24.57 mL of 0.03291M NaOH to achieve a phenolphthalein end point. Express the acidity of the wine in grams of tartaric acid (H2C4H4O6; 150.09 g/mol) per 100 mL. (Assume that two hydrogens of the acid are titrated.)
A sample of meat scrap weighing 2.000 g is digested with concentrated sulfuric acid and a catalyst. The resulting solution is made alkaline with NaOH and the liberated ammonia distilled into 50.00 mL of 0.6700 N HCl. The excess acid then requires 30.10 mL of 0.6520 N NaOH for neutralization. What is the percentage of the protein in the meat? The Kjeldahl factor is 6.25.
A sample of meat scrap weighing 2.000 g is digested with concentrated sulfuric acid and a catalyst. The resulting solution is made alkaline with NaOH and the liberated ammonia distilled into 50.00 mL of 0.6700 N HCl. The excess acid then requires 30.10 mL of 0.6520 N NaOH for neutralization. What is the percentage of the protein in the meat? The Kjeldahl factor is 6.25. (pls answer thanku)
A conductivity titration is performed between 21.3 mL of 0.1089 M calcium hydroxide and 0.0642 M phosphoric acid. The balanced equation is below. 3 Cа(ОН)2 (ag) + 2 H3РО4 (aд) —> Саз(РOa)2 (s) + 6 H20 What is the theoretical volume (accepted value) of phosphoric acid (in mL) at the equivalence point? Enter your answer without units. If a conductivity of zero was reached at 23.09 mL of H3PO4 (experimental value), what is the percent error? Enter your answer without the % symbol.
A chemist titrates a 25.0 mL sample of 0.239 M benzoic acid (C6H5COOH) against a 0.100 M solution of NaOH.The overall reaction is shown by the equation below: C6H5COOH(aq)+NaOH(aq)C6H5COONa(aq)+H2O(l) The Ka value for benzoic acid is 6.28 × 10–5. Calculate the pH at the start of the titration, before any NaOH has been added. Give your answer correctly to two places after the decimal.