Sportway Inc. produces high-quality tennis racquets and golf clubs using a patented forming process and high-quality hand-finishing. Products move through two production departments: Forming and Finishing. The company uses departmental overhead rates to allocate overhead costs. Overhead is allocated based on machine-hours in Forming and direct labour cost in Finishing. Information related to costs for last year is provided below: Annual production and sales (units) Direct materials cost per unit Direct labour cost per unit: Forming Department Finishing Department Machine-hours per unit: Forming Department Finishing Department Tennis Golf Racquets Clubs 6,800 10,700 $ 5.10 $ 4.20 $7.00 $ 6.50 $6.00 $ 7.00 0.25 0.00 0.25 0.50 In addition, the firm budgets manufacturing overhead at $62,750 in the Forming Department and $64,500 in the Finishing Department. Determine the total cost per unit of tennis racquets and golf clubs.
Q: None
A:
Q: Alden Company uses a three-variance analysis for factory overhead variances. Practical capacity is…
A: The objective of the question is to calculate the total overhead spending variance, the overhead…
Q: None
A: To compute Capital gain recognized on the sale: Capital gain and recognized on the sale and…
Q: Hardev
A: Pharoah Company's Warranty Expense for 2025Pharoah Company takes product quality seriously. To…
Q: Ashvin
A: The objective of the question is to calculate the budgeted operating profits in each division for…
Q: ange 18 Dec. 15: Declared total cash dividends of $50,000. Date Dec. 15 Accounts and Explanation…
A: DateAccountDrCrDec. 15Retained Earnings$50,000 Dividend payable $50,000 (To record dividend…
Q: Derrick Iverson is a divisional manager for Holston Company. His annual pay raises are largely…
A: Part 2: Explanation:Step 1: Calculate the annual cash flows.To calculate the annual cash flows, we…
Q: Vikrambhai
A: To consolidate Sledge and Percy as of December 31, 2024, and compute the net income attributable to…
Q: Provide the Correct answer of the question @@@
A: Step 1:b) Material loading percentage is the sum of Material loading charges percentage to total…
Q: If an insurance expense is incurred in February but was paid in January, the journal entry recorded…
A: The objective of the question is to understand the journal entry that would be recorded in January…
Q: Fast Wire Incorporated manufactures a scrambling device for cellular phones. The main component of…
A: Step 1: Formula Partial operational productivity ratio = Number of phones manufactured (2021) /…
Q: Vinubhai
A: The objective of the question is to calculate the inventory turnover for Deere & Company for the…
Q: Conduct an in-depth analysis of the Bank of St. Vincent and the Grenadines Ltd financial reporting…
A: Approach to solving the question: Financial Reporting Analysis:Review Financial Statements: Analyze…
Q: 6 Check my work 16.7 points eBook Print References Henrie's Drapery Service is investigating the…
A: Henrie's Drapery Service is contemplating the acquisition of a new machine designed for cleaning and…
Q: ! Required Information Saved [The following information applies to the questions displayed below.]…
A: Detailed explanation:When making journal/adjusting entries analyze what accounts are affected and…
Q: None
A: To determine the consolidated retained earnings after Pamela Company's acquisition of 75% of Snicker…
Q: Complete solution for this question step by step
A: Complete Solution for Bird's Eye Treehouses Lockbox System:0-1. NPV of the New Lockbox System:Here's…
Q: please answer in text form and in proper format answer with must explanation , calculation for each…
A: Step 1:Understanding of direct material and labor variances:- Direct material price variance is a…
Q: The Bandor Group sold one of its plant assets on June 1 of the current year for $70,000. The asset…
A: The objective of the question is to prepare the journal entries required to record the depreciation…
Q: Value-Stream Costing Objective During the week of June 12, Harrison Manufacturing produced and…
A: Value Stream Costing Analysis for Harrison Manufacturing1. Data Analysis:The provided information…
Q: Shi Company is going through a Chapter 7 bankruptcy. All assets have been liquidated, and the…
A: The distribution of Shi Company's remaining funds among its creditors is governed by Title 11 of the…
Q: ! Required information [The following information applies to the questions displayed below.] Badger…
A: Step 1:b) In a non-taxable stock distribution, the shareholder's tax basis is reallocated between…
Q: Gadubhai
A: Step 1: Recording the PurchaseAccount Titles and Explanation: Investments in Murphy, Inc. |…
Q: Strong Metals Incorporated purchased a new stamping machine at the beginning of the year at a cost…
A: Step 1:Units of production Depreciation per unit = (Cost value - salvage value) / Useful life in…
Q: (ii) Prepare the Income Statement and Balance Sheet taking into consideration:1. Closing Stock as on…
A: Part 2: Explanation:Step 1: Calculate Revenue by summing up cash sales and credit sales. Step 2:…
Q: Solutions for Step by step
A: Step 1: Computation of Hours Nursing hours = 500 * 30 minutes / 60 minutes = 250 hours Physician…
Q: - Your answer is partially correct. Larkspur International is considering a significant expansion to…
A: Without new products: ROA = 482,985 / 5,366,500 = 0.090 (multiply by 100 to get %)= 9% Profit Margin…
Q: Which of the following statements is true? Group of answer choices The right-of-use asset is…
A: The objective of the question is to identify the correct statement about the calculation of the…
Q: Suppose that Crane Corporation sells three different products. The following information is…
A: Correct option:$6,310 Show formula version of the detailed solution sheet for a better understanding…
Q: Vishnu
A: Closing entries are crucial in the accounting cycle as they reset the temporary accounts, such as…
Q: Support Department Cost Allocation-Direct Method Christmas Timber, Inc., produces Christmas trees.…
A: TStep 1:Workings: Maintenance Department6000 Janitorial Department5,000 Cutting Department54,000…
Q: Warnerwoods Company uses a periodic inventory system. It entered into the following purchases and…
A: Total goods available for sales is computed by adding all the units we have and all the units that…
Q: On December 1, 2022, Crane Company had the account balances shown below.Debit CreditCash $5,500…
A: The objective of the question is to calculate the changes in the account balances of Crane Company…
Q: Perrette Motor Company rebuilds automobile engines that have been damaged or are in need of…
A: Cost per Equivalent Unit for Perrette Motor CompanyWe can calculate the cost per equivalent unit for…
Q: Johnston Company (JC) sells two types of bicycles with details as follows for 2019: Plan Expected…
A: 1. To calculate the budgeted contribution margin for each model, you subtract the variable costs…
Q: Szabo Inc. has the following general ledger account balances at December 31, 2019: Dividends…
A: The objective of this question is to calculate the balance in the Retained Earnings account after…
Q: An analyst with a mutual fund is considering buying an FCS Inc corporate bond. She has collected the…
A: a) Now let's determine the ratios: Operating income before depreciation and amortization (EBITDA) is…
Q: The following budgeted data pertain to Zee Corporation for the month of Janua Quantity (Q) Static…
A: Step 1: Activity variance for variable manufacturing costs is the difference between the flexible…
Q: Shadee Corporation expects to sell 590 sun shades in May and 360 in June. Each shades sells for $15.…
A:
Q: Please do not give solution in image format thanku
A: Step 1:Calculations:(Image for understanding purpose) Formulas:Step 2:FINAL ANSWERS:PART-a)…
Q: f the lessor meets any one of the five Group I criteria, then the lessor classifies the lease as…
A: The question is asking us to identify the type of lease based on the criteria met by the lessor. In…
Q: XTreme Sports Company makes snowboards, downhill skis, cross-country skis, skateboards, surfboards,…
A: Residual Income Calculation and InterpretationFormula:Residual income (RI) = Operating income -…
Q: None
A: Sure! Based on the square footage and the allocation method described, the Endoscopy department's…
Q: FIFO
A: The objective of the question is to calculate the cost of merchandise sold and the inventory balance…
Q: Tannin Products Inc. prepared the following factory overhead cost budget for the Trim Department for…
A: Tannin Products Inc. - Factory Overhead Cost Variance Report - Trim Department (Month Ended July)At…
Q: Requirements a. Prepare the journal entry required to record the impairment loss. b. Assuming that…
A: Solutions for Lewad's Domino Impairment Lossa. Impairment Loss Journal Entry:Date of Impairment |…
Q: Accounting equation Inspiring U is a motivational consulting business. At the end of its accounting…
A: Step-1:To solve this problem, we need to use the accounting equation, which is:Assets = Liabilities…
Q: Alpesh
A: In the process of Chapter 7 bankruptcy, a company like Shi Company is in a state of financial…
Q: 2:04 4G. 37% and then sells those units to its customers. Calculate the break-even point in unit s…
A: The objective of the question is to calculate the break-even point, profit, and target sales under…
Q: Jackie, a higher paid employee, has an 1000cc, diesel van which was first registered in 2017 when it…
A: Taxable benefit refers to the value of non-cash perks or advantages provided to employees by their…
Unlock instant AI solutions
Tap the button
to generate a solution
Click the button to generate
a solution
- Lansing. Inc., provided the following data for its two producing departments: Machine hours are used to assign the overhead of the Molding Department, and direct labor hours are used to assign the overhead of the Polishing Department. There are 30,000 units of Form A produced and sold and 50,000 of Form B. Required: 1. Calculate the overhead rates for each department. 2. Using departmental rates, assign overhead to live two products and calculate the overhead cost per unit. How does this compare with the plantwide rate unit cost, using direct labor hours? 3. What if the machine hours in Molding were 1,200 for Form A and 3,800 for Form B and the direct labor hours used in Polishing were 5,000 and 15,000, respectively? Calculate the overhead cost per unit for each product using departmental rates, and compare with the plantwide rate unit costs calculated in Requirement 2. What can you conclude from this outcome?A manufacturing company has two service and two production departments. Human Resources and Machine Repair are the service departments. The production departments are Grinding and Polishing. The following data have been estimated for next years operations: The direct charges identified with each of the departments are as follows: The human resources department services all departments of the company, and its costs are allocated using the numbers of employees within each department, while machine repair costs are allocable to Grinding and Polishing on the basis of machine hours. 1. Distribute the service department costs, using the direct method. 2. Distribute the service department costs, using the sequential distribution method, with the department servicing the greatest number of other departments distributed first.Minor Co. has a job order cost system and applies overhead based on departmental rates. Service Department 1 has total budgeted costs of 168,000 for next year. Service Department 2 has total budgeted costs of 280,000 for next year. Minor allocates service department costs solely to the producing departments. Service Department 1 cost is allocated to producing departments on the basis of machine hours. Service Department 2 cost is allocated to producing departments on the basis of direct labor hours. Producing Department 1 has budgeted 8,000 machine hours and 12,000 direct labor hours. Producing Department 2 has budgeted 2,000 machine hours and 12,000 direct labor hours. What is the total cost allocation from the two service departments to Producing Department 1? a. 173,600 b. 140,000 c. 134,400 d. 274,400
- Vargas, Inc., produces industrial machinery. Vargas has a machining department and a group of direct laborers called machinists. Each machinist is paid 25,000 and can machine up to 500 units per year. Vargas also hires supervisors to develop machine specification plans and to oversee production within the machining department. Given the planning and supervisory work, a supervisor can oversee three machinists, at most. Vargass accounting and production history reveal the following relationships between units produced and the costs of direct labor and supervision (measured on an annual basis): Required: 1. Prepare two graphs: one that illustrates the relationship between direct labor cost and units produced, and one that illustrates the relationship between the cost of supervision and units produced. Let cost be the vertical axis and units produced the horizontal axis. 2. How would you classify each cost? Why? 3. Suppose that the normal range of activity is between 2,400 and 2,450 units and that the exact number of machinists is currently hired to support this level of activity. Further suppose that production for the next year is expected to increase by an additional 400 units. How much will the cost of direct labor increase (and how will this increase be realized)? Cost of supervision?Eclipse Motor Company manufactures two types of specialty electric motors, a commercial motor and a residential motor, through two production departments, Assembly and Testing. Presently, the company uses a single plantwide factory overhead rate for allocating factory overhead to the two products. However, management is considering using the multiple production department factory overhead rate method. The following factory overhead was budgeted for Eclipse: Direct machine hours were estimated as follows: In addition, the direct machine hours (dmh) used to produce a unit of each product in each department were determined from engineering records, as follows: a. Determine the per-unit factory overhead allocated to the commercial and residential motors under the single plantwide factory overhead rate method, using direct machine hours as the allocation base. b. Determine the per-unit factory overhead allocated to the commercial and residential motors under the multiple production department factory overhead rate method, using direct machine hours as the allocation base for each department. c. Recommend to management a product costing approach, based on your analyses in (a) and (b). Support your recommendation.Evans, Inc., has a unit-based costing system. Evanss Miami plant produces 10 different electronic products. The demand for each product is about the same. Although they differ in complexity, each product uses about the same labor time and materials. The plant has used direct labor hours for years to assign overhead to products. To help design engineers understand the assumed cost relationships, the Cost Accounting Department developed the following cost equation. (The equation describes the relationship between total manufacturing costs and direct labor hours; the equation is supported by a coefficient of determination of 60 percent.) Y=5,000,000+30X,whereX=directlaborhours The variable rate of 30 is broken down as follows: Because of competitive pressures, product engineering was given the charge to redesign products to reduce the total cost of manufacturing. Using the above cost relationships, product engineering adopted the strategy of redesigning to reduce direct labor content. As each design was completed, an engineering change order was cut, triggering a series of events such as design approval, vendor selection, bill of materials update, redrawing of schematic, test runs, changes in setup procedures, development of new inspection procedures, and so on. After one year of design changes, the normal volume of direct labor was reduced from 250,000 hours to 200,000 hours, with the same number of products being produced. Although each product differs in its labor content, the redesign efforts reduced the labor content for all products. On average, the labor content per unit of product dropped from 1.25 hours per unit to one hour per unit. Fixed overhead, however, increased from 5,000,000 to 6,600,000 per year. Suppose that a consultant was hired to explain the increase in fixed overhead costs. The consultants study revealed that the 30 per hour rate captured the unit-level variable costs; however, the cost behavior of other activities was quite different. For example, setting up equipment is a step-fixed cost, where each step is 2,000 setup hours, costing 90,000. The study also revealed that the cost of receiving goods is a function of the number of different components. This activity has a variable cost of 2,000 per component type and a fixed cost that follows a step-cost pattern. The step is defined by 20 components with a cost of 50,000 per step. Assume also that the consultant indicated that the design adopted by the engineers increased the demand for setups from 20,000 setup hours to 40,000 setup hours and the number of different components from 100 to 250. The demand for other non-unit-level activities remained unchanged. The consultant also recommended that management take a look at a rejected design for its products. This rejected design increased direct labor content from 250,000 hours to 260,000 hours, decreased the demand for setups from 20,000 hours to 10,000 hours, and decreased the demand for purchasing from 100 component types to 75 component types, while the demand for all other activities remained unchanged. Required: 1. Using normal volume, compute the manufacturing cost per labor hour before the year of design changes. What is the cost per unit of an average product? 2. Using normal volume after the one year of design changes, compute the manufacturing cost per hour. What is the cost per unit of an average product? 3. Before considering the consultants study, what do you think is the most likely explanation for the failure of the design changes to reduce manufacturing costs? Now use the information from the consultants study to explain the increase in the average cost per unit of product. What changes would you suggest to improve Evanss efforts to reduce costs? 4. Explain why the consultant recommended a second look at a rejected design. Provide computational support. What does this tell you about the strategic importance of cost management?
- Box Springs. Inc., makes two sizes of box springs: queen and king. The direct material for the queen is $35 per unit and $55 is used in direct labor, while the direct material for the king is $55 per unit, and the labor cost is $70 per unit. Box Springs estimates it will make 4,300 queens and 3,000 kings in the next year. It estimates the overhead for each cost pool and cost driver activities as follows: How much does each unit cost to manufacture?Business Specialty, Inc., manufactures two staplers: small and regular. The standard quantities of direct labor and direct materials per unit for the year are as follows: The standard price paid per pound of direct materials is 1.60. The standard rate for labor is 8.00. Overhead is applied on the basis of direct labor hours. A plantwide rate is used. Budgeted overhead for the year is as follows: The company expects to work 12,000 direct labor hours during the year; standard overhead rates are computed using this activity level. For every small stapler produced, the company produces two regular staplers. Actual operating data for the year are as follows: a. Units produced: small staplers, 35,000; regular staplers, 70,000. b. Direct materials purchased and used: 56,000 pounds at 1.5513,000 for the small stapler and 43,000 for the regular stapler. There were no beginning or ending direct materials inventories. c. Direct labor: 14,800 hours3,600 hours for the small stapler and 11,200 hours for the regular stapler. Total cost of direct labor: 114,700. d. Variable overhead: 607,500. e. Fixed overhead: 350,000. Required: 1. Prepare a standard cost sheet showing the unit cost for each product. 2. Compute the direct materials price and usage variances for each product. Prepare journal entries to record direct materials activity. 3. Compute the direct labor rate and efficiency variances for each product. Prepare journal entries to record direct labor activity. 4. Compute the variances for fixed and variable overhead. Prepare journal entries to record overhead activity. All variances are closed to Cost of Goods Sold. 5. Assume that you know only the total direct materials used for both products and the total direct labor hours used for both products. Can you compute the total direct materials and direct labor usage variances? Explain.The following product costs are available for Stellis Company on the production of erasers: direct materials, $22,000; direct labor, $35,000; manufacturing overhead, $17,500; selling expenses, $17,600; and administrative expenses; $13,400. What are the prime costs? What are the conversion costs? What is the total product cost? What is the total period cost? If 13,750 equivalent units are produced, what is the equivalent material cost per unit? If 17,500 equivalent units are produced, what is the equivalent conversion cost per unit?
- Brees, Inc., a manufacturer of golf carts, has just received an offer from a supplier to provide 2,600 units of a component used in its main product. The component is a track assembly that is currently produced internally. The supplier has offered to sell the track assembly for 66 per unit. Brees is currently using a traditional, unit-based costing system that assigns overhead to jobs on the basis of direct labor hours. The estimated traditional full cost of producing the track assembly is as follows: Prior to making a decision, the companys CEO commissioned a special study to see whether there would be any decrease in the fixed overhead costs. The results of the study revealed the following: 3 setups1,160 each (The setups would be avoided, and total spending could be reduced by 1,160 per setup.) One half-time inspector is needed. The company already uses part-time inspectors hired through a temporary employment agency. The yearly cost of the part-time inspectors for the track assembly operation is 12,300 and could be totally avoided if the part were purchased. Engineering work: 470 hours, 45/hour. (Although the work decreases by 470 hours, the engineer assigned to the track assembly line also spends time on other products, and there would be no reduction in his salary.) 75 fewer material moves at 30 per move. Required: 1. Ignore the special study, and determine whether the track assembly should be produced internally or purchased from the supplier. 2. Now, using the special study data, repeat the analysis. 3. Discuss the qualitative factors that would affect the decision, including strategic implications. 4. After reviewing the special study, the controller made the following remark: This study ignores the additional activity demands that purchasing would cause. For example, although the demand for inspecting the part on the production floor decreases, we may need to inspect the incoming parts in the receiving area. Will we actually save any inspection costs? Is the controller right?Christmas Timber, Inc., produces Christmas trees. The trees are produced through a cutting and pruning process. Machine maintenance and janitorial labors are performed throughout the production process by nonproduction employees. Maintenance and janitorial costs are allocated based on machine hours used and the number of trees in each department, respectively. The company estimates that the cutting and pruning areas typically have about 20 and 60 trees, respectively, in them at one time. The company also estimates that the cutting process requires about 9 times as many machine hours as the pruning process. The total costs of each department are as follows: Using the direct method of support department cost allocation, determine the total cost of each production department after allocating all support costs to the production departments.Pelder Products Company manufactures two types of engineering diagnostic equipment used in construction. The two products are based upon different technologies, X-ray and ultrasound, but are manufactured in the same factory. Pelder has computed the manufacturing cost of the X-ray and ultrasound products by adding together direct materials, direct labor, and overhead cost applied based on the number of direct labor hours. The factory has three overhead departments that support the single production line that makes both products. Budgeted overhead spending for the departments is as follows: Pelders budgeted manufacturing activities and costs for the period are as follows: The budgeted cost to manufacture one ultrasound machine using the activity-based costing method is: a. 225. b. 264. c. 293. d. 305.