Q1-A construction site requires 100m3 of soil compacted at the maximum dry density estimated from laboratory standard compaction tests. Laboratory tests indicate the optimum moisture content is 12% and the degree of saturation at optimum is 85%. If the specific gravity is 2.7. a) Calculate the weight of dry soil required at the construction site. b) Calculate the total weight of soil that needs to be transported to the site if it is extracted from a borrow pit with a moisture content of 5%.

Q1-A construction site requires 100m3 of soil compacted at the maximum dry density estimated from laboratory standard compaction tests. Laboratory tests indicate the optimum moisture content is 12% and the degree of saturation at optimum is 85%. If the specific gravity is 2.7. a) Calculate the weight of dry soil required at the construction site. b) Calculate the total weight of soil that needs to be transported to the site if it is extracted from a borrow pit with a moisture content of 5%.

Principles of Foundation Engineering (MindTap Course List)

8th Edition

ISBN:9781305081550

Author:Braja M. Das

Publisher:Braja M. Das

Chapter16: Soil Improvement And Ground Modification

Section: Chapter Questions

Problem 16.2P

See similar textbooks

Similar questions

Q1: The permeability coefficient of the sandy soil is 0.085 cm/s with the porosity is 0.31 and specific gravity of 2.68. This soil was compacted to use it as a grade layer in highway project, after compaction was finished the relative compaction reached to 95%. Estimate the followings : 1- ko.85 2- permeability coefficient after compaction
A field density test has been conducted in a compacted fill that is currently under construction.The test results indicate a relative compaction of 101-103%, which made the constructionmanager believe the test must be incorrect. He believes it is impossible for the dry unit weightinthe field to be greater than the maximum dry unit weight from the Proctor compaction test.Explain why the relative compaction in the field could indeedbe greater than 100%.
A 50m*30m site has 1 m thick layer of organic soil, to be replaced with granular fill (Gs-2.6) with 21% fines and 31% oversized particles (Gos= 2.60 and wsSD = 1.9%). The site is prepared for 10-story building with a parking lot. Standard Proctor tests are performed on the fill material without oversized particles, and the test results are shown below. Compaction test Moisture content (%) 8.8 10.6 12.7 14.7 16.6 Wet unit weight (kN/m³) 16 18.1 -19.4 18.7 16.9 1) What are the key performance parameters? 2) Determine the parameters needed for field compaction. 3) If the average productivity of a single compactor is 30 m³/hr, how many days are need to finish the compaction work, assuming 8 working hours per day?
A compacted fill with a unit weight of 121 lb/ft^3 and a moisture content of 12.5% will be used for construction of a warehouse. Proctor compaction test was performed on a sample of the fill material. The test results revealed a maximum dry unit weight of 117 lb/ft^3 and an optimum moisture content of 13.0%. Compute the relative compaction based on the results of the Proctor compaction test.
. The maximum dry unit weight obtained from a standard compaction test on a silty sand forest road subgrade soil is 110 lb/ft3. The corresponding optimum water content is 26%. The compaction specifications call for compaction to 90% or greater of the maximum dry unit weight by the standard compaction test, and a water content of 2% less than the optimum water content. If the existing natural water content is 17%, how much water, in gallons, must be added per cubic yard of compacted soil to meet the specification?
2. The resulting of the Standard Proctor Test is as follows: Vol. of Proctor Mold Wt. of wet soil in mold Moisture (cu.m) (kg) (%) 943.3 1.76 12 943.3 1.86 14 943.3 1.92 16 943.3 1.95 18 943.3 1.93 20 943.3 1.90 22 a. Determine the maximum dry unit weight of compaction b. Determine the optimum moisture content
The following are the data of the compaction test: Volume of mold = 0.000945 m^3 Determine the degree of saturation at the optimum moisture content if Gs= 2.60
Dynamic loading, Vibro static test, Standard proctor and modified proctor are tests to determine soil compaction characteristics. O True O False
It is known that the natural soil at a construction site has a void ratio of 0.92. At the end ofcompaction, the in-place void ratio was found to be 0.65. If the moisture content remainsunchanged, then determine:(a) Percent decrease in the total volume of the soil due to compaction.(b) Percent increase in the field unit weight.(c) Percent change in the degree of saturation
At a site the relative compaction of a sand in the field is 93.5%.The maximum and minimum dry densities are 16.98kN/m3 and 14.46 kN/m3respectively. For field condition, determine dry unit weight. How you will select roller type and ensure that compaction is completed achieved by the contractor.
News Extensions G https A soil has a specific gravity of 2.65, and a water content of 0.35. The void ratio is 1.2. Determine the degree of saturation. ExprRyour aerW percent but do not write the percent sign.
A compacted fill, currently under construction, will support a proposed supermarket. One of the field density tests in this fill gave a unit weight of 121 lb/ft³ and a moisture content of 12.5%. A series of modified Proctor tests have also been performed on the fill soils per ASTM D1557, and they gave a maximum dry unit weight of 117 lb/ft³ and an optimum moisture content of 13.0%. Compute the relative compaction based on the modified Proctor test and determine whether or not it satisfies the normal compaction specification for such a project.