Medium oil having a sp.gr. of 0.90 flowsthrough a 120 mm diameter pipe with amean velocity of 5.3 m/s and a frictionfactor of 0.01. Oil has an absoluteviscosity of 0.04 Pa-s.Compute the velocity at the center.a) 7 m/s c) 5 m/sb) 6 m/sd) 8 m/s2 Compute the shear stress at the wallof the pipe.a) 48.62 N/m2 c) 31.60 N/m²b) 59.47 N/m2 d) 52.31 N/m²Compute the velocity at 40 mm fromthe center of the pipe.a) 5.485 m/sb) 6.325 m/sc) 7.458 m/sd) 8.569 m/s

Diameter of pipe, d = 120mm Mean velocity, Vav = 5.3m/sec The specific gravity of the soil, G = 0.90…

Medium oil having a sp.gr. of 0.90 flows through 120 mm diameter pipe with a mean velocity of 5.3 m/s and a friction factor of 0.01. Oil has an absolute viscosity of 0.04 Pa.s. Compute the velocity at the center. a) 7 m/s c) 5 m/s b) 6 m/s d) 8 m/s Compute the shear stress at the wall of the pipe. a) 48.62 N/m2 c) 31.60 N/m2 b) 59.47 N/m2 d) 52.31 N/m² Compute the velocity at 40 mm from the center of the pipe. a) 5.485 m/s c) 7.458 m/s b) 6.325 m/s d) 8.569 m/s

Medium oil having a sp.gr. of 0.90 flows through 120 mm diameter pipe with a mean velocity of 5.3 m/s and a friction factor of 0.01. Oil has an absolute viscosity of 0.04 Pa.s. Compute the velocity at the center. a) 7 m/s c) 5 m/s b) 6 m/s d) 8 m/s Compute the shear stress at the wall of the pipe. a) 48.62 N/m2 c) 31.60 N/m2 b) 59.47 N/m2 d) 52.31 N/m² Compute the velocity at 40 mm from the center of the pipe. a) 5.485 m/s c) 7.458 m/s b) 6.325 m/s d) 8.569 m/s

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A rigid pipe OABC is subject to a force F = 60i + 75j - 30k (N) applied at point C and force P applied at point B. Assume a =0.4426 m B a 0.1 m
SECTION: 500mm 20 KN I5 KNIM 1000 mm 12 m Ps 800 KN e : 400 mm (ASSUME IS % LOS SES) A. Determine the stress at the bottom in the free end. (MPa) B. Determine the stress at the top in the fixed end. (MPa)
Adosed cylindrical tank containinga pressurized fluid has an inside diameter of 472 mm and a wall thickness of 10 mm. The tank is pressurized to 240 MPa. Determine the absolute maximum shear stress on the inner surface of the cylinder wall. 40.2 MPa O 295 MPa 35.0 MPa O 272 MPa O 20.9 MPa
Problem (A) Find the thickness of metal necessary for a cylindrical shell of internal diameter 160 mm to withstand an internal pressure of 8 N/mm². The maximum hoop stress i the section is not to exceed 35 N/mm² probaken (b).Determine the maximum and minimum hoop stress across the section of a pipe of 400 mm internal diameter and 100 mm thick, when the pipe contains a fluid at a pressure of 8 N/mm². Also sketch the radial pressure distribution and hoop stress distribution across the section
3. A spherical pressure vessel has a D (mm) inner radius and thickness of 45mm. It is constructed by joining two hollow hemispheres connected by 10nos of 28mm dia bolts along the circumference. Working tensile stress of the vessel is 40 MPa while the tensile stress of the bolt is (o) MPa. (a) What is the maximum allowable internal pressure considering only the capacity of the bolts? (b) What is the maximum allowable internal pressure considering only the capacity of the vessel? (c) What is the maximum allowable internal pressure of the structure in Megapascals Assume: D = 761 σ = 461
Meme biloe orfT Timeneu of bozu et thede 19 5-5. The copper pipe has an outer diameter of 2.50 in, and an inner diameter of 2.30 in. If it is tightly secured to the wall and three torques are applied to it, determine the shear stress developed at points A and B. These points lie on the pipe's outer surface. Sketch the shear stress on volume elements located at A and B. sib- M00 B 450 lb ft 350 lb·ft 600 lb-ft ♡ 2 O O O
The copper pipe [G- 7.000 ksi] has an outside diameter of 3.500 in. and a wall thickness of 0.125 in. The pipe is subjected to a uniformly distributed torque of t - 95 Ib-ft/ft along its entire length. Using a - 2.5 ft, b- 4.0 ft, and c- 7.5 ft, determine (a) the maximum shear stress in the pipe. (b) the rotation angle @c at the free end of the shaft. Answers: (a) Tmax i psi (b) ợc-i rad
A fire extinguisher tank is designed for an internal pressure of 874 psi. The tank has an outer diameter of 4.5 in. and thickness of 0.08 in. Calculate the longitudinal stress, the circumferential stress, and maximum shear stresses (in-plane and out-of-plane) at the outer surface of the tank. (Assume that all internal pressures are gage pressures. Enter the magnitudes in ksi.) longitudinal 01 ksi circumferential ksi in-plane Tmax ksi out-of-plane Tmax ksi
Q3: The solid shaft is made of material that has an allowable shear stress of t allowabk 60 MPa. Determine the required diameter of the shaft to the nearest mm. 800 N.m 600 N.m 2.5m 2.5m
(47 H.WOA vod Con sists of three bars of unequal dlameters as shown in fig., find the Stress in each bar and the C longation of the rocd ? use E = 200G Va %3D Ø=4omm =30mm =20 mm 2.1W 60 1.5m 2.5m 2m
4G ll. 91 jo 78 Home work The copper pipe has an outer diameter of 40mm and an inner diameter of 37mm. If it is tightly secured to the wall at A and three torques are applied to it as shown below in the figure. Determine the absolute maximum shear stress developed in the pipe 2ON.m 8ON M 3ON.M هوم و ورك مقاومه التسليم الثلاثاء القادم. . . ناطق العیدان 29/12/21
The elliptical pipe carrying steam at 3.5 mPa has an outer major axis length of 500 mm and an outer minor axis length of 400 mm with a wall thickness of 10 mm. A gasket is inserted between the flange at end of the pipe , and a flat plate is attached using 40 mm diameter bolts to cap the end . The allowable Stress in the bolts is 80 Mpa. How many bolts must be used to hold the cap if there is an initial stress of 30 mPa ?