Week 4 #14It doesn’t matter whether the cork is placed on the inside or the outside of the wooden wall becauseAnswers (check all that apply) 1- the temperature at the interface differs for the two cases.2 - the temperature at the interface is the same for the two cases.3- the total thermal resistance is the same for the two cases.4 - the total thermal resistance differs for the two cases. !Required informationA wall consists of a layer of wood and a layer of cork insulation of the samethickness. The temperature inside is 25.0°C, and the temperature outside is0.0°C. The thermal conductivity of wood is 0.130 W/(m-K) and the thermalconductivity of cork is 0.0460 W/(m.K).OutsideT=0.0°CT=?OutsideT=X°C T=0.0°CInsideWood CorkT= ?InsideT=X°CCork Woodwhere X = 25.0.It doesn't matter whether the cork is placed on the inside or the outside of the woodenwall because

Answered: Image /qna-images/answer/07cbdda4-9cf1-4ebf-be0e-4f57640713a9.jpg

It doesn’t matter whether the cork is placed on the inside or the outside of the wooden wall because Answers (check all that apply) 1- the temperature at the interface differs for the two cases. 2 - the temperature at the interface is the same for the two cases. 3- the total thermal resistance is the same for the two cases. 4 - the total thermal resistance differs for the two cases.

It doesn’t matter whether the cork is placed on the inside or the outside of the wooden wall because Answers (check all that apply) 1- the temperature at the interface differs for the two cases. 2 - the temperature at the interface is the same for the two cases. 3- the total thermal resistance is the same for the two cases. 4 - the total thermal resistance differs for the two cases.

College Physics

1st Edition

ISBN:9781938168000

Author:Paul Peter Urone, Roger Hinrichs

Publisher:Paul Peter Urone, Roger Hinrichs

Chapter14: Heat And Heat Transfer Methods

Section: Chapter Questions

Problem 66PE: Integrated Concepts One 30.0C day the relative humidity is 75.0%, and that evening the temperature...

See similar textbooks

Similar questions

Diagram of the problem, necessary formulas, clearance and numerical solution The filament of an incandescent lamp has an area of 50 mm2 and operates at a temperature of 2,127 ◦C. Assume that all the energy supplied to the bulb is radiated by it. If the emissivity of the filament is 0.83, how much power must be supplied to the bulb when it is in operation?
Q1/ The thermal contact conductance at the interface of two 1.5-cm-thick copper plates is measured to be 19,000 W/m2 · °C. Determine the thickness of the copper plate whose thermal resistance is equal to the thermal resistance of the interface between the plates. The thermal conductivity of copper k = 401 W/m°C
The ratio A. B. C. D. 6* A OB O D thermal capacity of a sample of copper specific heat capacity of copper does not have any unit. has unit J kg-¹ K-¹ has unit J kg-¹. has unit kg.
The tungsten filament of a light bulb has an operating temperature of about 2100 K. If the emitting area of the filament is 1.0 cm2, and its emissivity is 0.68, what is the power output of the light bulb? (s = 5.67×10-8 W/m2×K4) A. 100 W B. 75 W C. 60 W D. None of the above
Problem 1- Heat Transfer How thick would the glass panes on a double-glazed window (air gap = 2mm) have to be to make the double-glazed resistance to heat transfer equal to the resistance to heat transfer provided by a single pane of glass of thickness 50mm. The thermal conductivity of air and glass are 0.05W/m°C and 0.9W/m°C respectively.
Insulating Material A Part A: 960 Btu/hr heat is conducted through a section of insulating material shown in Figure that measures 9.5 ft² in cross- sectional area. The k thickness is 0.725 inch. ΔΧ The thermal conductivity of the material is 0.19 W/m K. Calculate the, a) area of the sample in square meter (m²) : b) thickness of the specimen in meter (m): c) temperature difference in Kelvin :
Physics for Engineers (Answer only. No long explanation needed. Rate will be given) The coefficient of linear thermal expansion for a material is 27.0x10-6/C. What is the change in the area of the circle of radius 0.45 mm initially at 30C, if the temperature is increased to 700.0C? a. 5.92 x 10-9 m2 b. 2.30 x 10-9 m2 c. 1.36 x 10-4 cm2 d. 1.89 x 10-4 cm2 e. 4.33 x 10-5 cm2
Copper wires used to transport electrical current heat up because of the resistance in the wire. If M is 130 grams wire gains Q is 277 J, what is the change in temperature in the wire? Copper has a specific heat of 0.384J/g-°C.
Example The figure below shows the cross section of a wall made of pine of thickness La and brick of thickness Ld (= 2La), sandwiching two layers of unknown material with identical thickness and thermal conductivity. The thermal conductivity of the pine is ka and that of the brick is kd (=5ka). The face area A of the wall is unknown. Thermal conduction through the wall has reached the steady state; the only known interface temperatures are T1 = 25°C, T2 = 20°C, and T5-10°C. What is interface temperature T4? Ti T Indoors ka T3 (a) k₂ LLL k (b) C (d) -T, Outdoors
Determine the heat capacity for alumina ceramic (Al2O3) at 1500 deg C. Response is in cal/mole.K. You can assume the constant R is 2 cal/mole.K or 8.3 joules/mole.K
Give examples of case studies/analyses on the ffg:1. Error in measurement of thermal expansion or heat transfer analysis
What is the expression for heat current? Q is heat, t is time, T is temperature. a) ΔQ/Δt b) ΔQ/ΔT c) ΔT/Δt d) ΔQ/ΔTΔt