Consider a computer 1 that communicates with a computer 2 via LAN1, router R1, and LAN2. The sending computer1 is running two processes at this time with port addresses k and l. The receiving computer 2 is running three processes at this time with port addresses f, g and h. Process k in the sending computer 1 needs to communicate with process g in the receiving computer 2. Draw the network and show the contents of segments, packets and frames at the network, data link, and transport layer for each hop. Note: Computer 1 has: Physical address=15, Logical address=A Router R1 has: Physical address in the side of LAN 1=20, Logical address in the side of LAN1=B Physical address in the side of LAN 2=50, Logical address in the side of LAN2=D. Computer 2 has: Physical address=77, Logical address=E.

Consider a computer 1 that communicates with a computer 2 via LAN1, router R1, and LAN2. The sending computer1 is running two processes at this time with port addresses k and l. The receiving computer 2 is running three processes at this time with port addresses f, g and h. Process k in the sending computer 1 needs to communicate with process g in the receiving computer 2. Draw the network and show the contents of segments, packets and frames at the network, data link, and transport layer for each hop. Note: Computer 1 has: Physical address=15, Logical address=A Router R1 has: Physical address in the side of LAN 1=20, Logical address in the side of LAN1=B Physical address in the side of LAN 2=50, Logical address in the side of LAN2=D. Computer 2 has: Physical address=77, Logical address=E.

Systems Architecture

7th Edition

ISBN:9781305080195

Author:Stephen D. Burd

Publisher:Stephen D. Burd

Chapter13: Internet And Distributed Application Services

Section: Chapter Questions

Problem 15VE

See similar textbooks

Similar questions

A frame containing http request is sent from Computer (A) [in whichever subnet it is now, make sure to show it in your figure], to the access point it is associated with. Draw the address fields (1, 2, and 3) of the frame travelling from Computer A to AP and the source and destination addresses of the frame travelling from AP to R1. The MAC addresses of AP1, AP2, and AP3 are M1, M2, and M3 respectively, and the Router R1’s MAC address connected to this Switch/AP is MRA. IP address values are already given, and the port addresses could also be used as given. The Router’s MAC address facing WAN side is MRW.
An HTTP client opens a TCP connection using an initial sequence number (ISN) of 14,534 and the ephemeral port number of 59,100. The server opens the connection with an ISN of 21,732. Show the three TCP segments during the connection establishment if the client defines the rwnd of 4000 and the server defines the rwnd of 5000. Ignore the calculation of the checksum field.
In modern packet-switched networks, including the Internet, the source host segments long, application-layer messages (for example, an image or a music file) into smaller packets and sends the packets into the network. The receiver then reassembles the packets back into the original message. We refer to this process as message segmentation. Figure 1.27 illustrates the end-to-end transport of a message with and without message segmentation. Consider a message that is 8. 106 bits long that is to be sent from source to destination in Figure 1.27. Suppose each link in the figure is 2 Mbps. Ignore propagation, queuing, and processing delays. a. Consider sending the message from source to destination without message segmentation. How long does it take to move the message from the source host to the first packet switch? Keeping in mind that each switch uses store-and-forward packet switching, what is the total time to move the message from source host to destination host? b. Now suppose that…
(a) Suppose a server S and client C are connected over the Internet. The one-way prop- agation delay from S to C is 50 ms. The maximum throughput between S and C is R = 200 Mbps. A browser on client C makes an HTTP request for a webpage on server S. The base HTML file is of size 500 KB and it references five objects, each of size 5 MB. Find the total response time for the client to receive the entire webpage using nonpersistent HTTP with up to two parallel connections. Assume that when two par- allel connections are active, the throughput for each connection is 40% of the maximum throughput R. (b) Suppose an application running on host ece.gmu.edu needs to resolve the domain name cs.vtech.edu. Draw a diagram (with labels) showing the sequence of queries/responses in a recursive DNS query to find the answer in a scenario where all levels of the DNS hierarchy are involved.
1. Build a Router network which has three Generic Routers and totally of Six networks in it. From each Router the required switch shall be connected through Fast Ethernet port and the switch is connected to two users. On the whole there are '6' networks in the configuration. Along with the network diagram do the packet transfer in simulation mode and write results for three different combinations.
In a data communication system, several messages that arrive at a node are bundled into a packet before they are transmitted over the network. Assume that the messages arrive at the node according to a Poisson process with rate 30 messages per minute (0.5 per second). Five messages are used to form a packet.What is the mean time until a packet is formed, that is, until five messages arrive at the node?
Host A and B are communicating over a TCP connection. Host B has already received from Host A all bytes up through byte 23. Suppose Host A then sends two segments to Host B back-to-back. The first and the second segments contain 30 and 50 bytes of data, respectively. In the first segment, the sequence number is 24, the source port number is 3000, and the destination port number is 80. Host B sends an acknowledgment whenever it receives a segment from Host A. A. In the second segment sent from Host A to B, what arethe sequence number_________,source port number __________,and destination port number__________?B. If the second segment arrives after the first segment, in the acknowledgment of the second segment, what arethe acknowledgment number___________,the source port number__________,and the destination port number __________?C. If the second segment arrives before the first segment, in the acknowledgment of the first arriving segment,what is the acknowledgment number ___________?D.…
A packet switch receives a packet and determines the outbound link to which the packet should be forwarded. When the packet arrives, one other packet is halfway done being transmitted on this outbound link and four other packets are waiting to be transmitted. Packets are transmitted in order of arrival. Suppose all packets are 1,200 bytes and the link rate is 2 Mbps. What is the queuing delay for the packet? More generally, what is the queuing delay when all packets have length L, the transmission rate is R, x bits of the currently-being-transmitted packet have been transmitted, and n packets are already in the queue?
Host A and B are communicating over a TCP connection, and Host B has already received from A all bytes up through byte 126. Suppose Host A then sends two segments to Host B backto-back. The first and second segments contain 80 and 40 bytes of data, respectively. In the first segment, the sequence number is 127, the source port number is 302, and the destination port number is 80. Host B sends an acknowledgment whenever it receives a segment from Host A. d. Suppose the two segments sent by A arrive in order at B. The first acknowledgment is lost and the second acknowledgment arrives after the first timeout interval. Draw a timing diagram, showing these segments and all other segments and acknowledgments sent. (Assume there is no additional packet loss.) For each segment in your figure, provide the sequence number and the number of bytes of data; for each acknowledgment that you add, provide the acknowledgment number.
Host A and B are communicating over a TCP connection, and Host B has already received from A all bytes up through byte 126. Suppose Host A then sends two segments to Host B backto-back. The first and second segments contain 80 and 40 bytes of data, respectively. In the first segment, the sequence number is 127, the source port number is 302, and the destination port number is 80. Host B sends an acknowledgment whenever it receives a segment from Host A.a. In the second segment sent from Host A to B, what are the sequence number, source port number, and destination port number?b. If the first segment arrives before the second segment, in the acknowledgment of the first arriving segment, what is the acknowledgment number, the source port number, and the destination port number?c. If the second segment arrives before the first segment, in the acknowledgment of the first arriving segment, what is the acknowledgment number?d. Suppose the two segments sent by A arrive in order at B. The…
Host A and B are communicating over a TCP connection, and Host B has already received all bytes up through byte 100 (including Byte 100) from A. Suppose Host A then sends two packets to Host B back-to-back. The first and second packets contain 40 and 80 bytes of data, respectively. Host B sends an acknowledgment whenever it receives a packet from Host A. a. What is the sequence number of the first packet sent from Host A to Host B? What is the sequence number of the second packet sent from Host A to Host B? b. If the second packet arrives before the first packet, in the acknowledgment of the first arriving packet, what is the acknowledgment number? .
Given a M/M/1 queue, which has packets arriving at a rate 2 packets/sec, an output link rate R bps, and an average packet size of 1500 bytes, write down: the expression for T, the average delay for a packet (i.e., from arrival till completing transmission at the output). b. the expression for the output utilization c. the expression for average number of packets in the queue d. the expression for average number of packets in the output NIC