According to Reference [1], alloys of nickel (Ni) and tungsten (W) are can form substitutional solid solutions up to approximately 11 at% W. Consider two different alloy compositions: Ni-5W (5 at% W) and Ni-10.5W (10.5 at% W). A. Which composition should be more ductile? B. Which composition should be stronger? C. Using the oy ~ C¹/2 relationship from the lecture slides, how many times larger should the yield strength be for Ni-10.5W compared to Ni-5W? D. Where should the tungsten atoms sit relative to the dislocation on or opposite the side with the extra half-plane? You will need information from Appendixes of the textbook.

According to Reference [1], alloys of nickel (Ni) and tungsten (W) are can form substitutional solid solutions up to approximately 11 at% W. Consider two different alloy compositions: Ni-5W (5 at% W) and Ni-10.5W (10.5 at% W). A. Which composition should be more ductile? B. Which composition should be stronger? C. Using the oy ~ C¹/2 relationship from the lecture slides, how many times larger should the yield strength be for Ni-10.5W compared to Ni-5W? D. Where should the tungsten atoms sit relative to the dislocation on or opposite the side with the extra half-plane? You will need information from Appendixes of the textbook.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Q1 / Two metals Beryllium (Be) and Silicon (Si) have melting points 1282°C and 1414 °C respectively, are completely soluble as liquids but completely insoluble as solids . They form a eutectic at 1090°C containing 61 wt% Si -39wt% Be? Determine the following:- 1- Draw the thermal equilibrium phase diagram and identify all phases are present in diagram ,then sketches what happens in microstructure when the alloys containing , a- 10wt% Si, b-70wt%Si , solidify completely. 2- Determine the composition and the amount of each phase for the alloy which contain 15 wt% Si-85wt% Be at 1150°C If the alloy is hypoeutectic determine the amount of eutectic at 600 °C? or hypereutectic and
rams A copper-nickel alloy of composition 75 wt% Ni-25 wt% Cu is slowly heated from a temperature of 1300°C (1573). (a) At what temperature does the first liquid phase form? (b) What is the composition of this liquid phase? T(°C) 1600 (c) At what temperature does complete melting of the alloy occur? (d) What is the composition of the last solid remaining prior to complete melting? 1500 1400 1300 1200 1100 1000 17 / 17 0 L (liquid) 20 liquidus + a solidus 100% 40 α (FCC solid solution) 60 80 100 wt% Ni 17
For 40 wt% Sn – 60 wt% Pb alloy at 150 oC (at point B) as shown in Figure, i. State the name of phase(s) present. ii. Calculate the composition(s) of the phase(s) present. 600 300 Liquid 500 a+L 200 400 300 100 200 100 20 60 100 (Pb) (Sn) Composition (wt % Sn) Temperature ("C) Temperature ("F)
Q) Consider a 1.5 kg of a 99.7wt% Fe-0.3 wt% C alloy thatis cooled to a temperaturejust below the eutectoid.(a) How many kilograms of proeutectoid ferrite?(b) How many kilogram of cementite form ?(c) How many kilograms of all ferrite form? And How many kilograms of cutectoid ferrite?
Referring to Figure 1, answer the following: What are the liquidus and solidus temperatures for an 80%Pb20%Tl alloy? What is the composition of the solid solution phase for the aforementioned alloy once we hit the liquidus temperature upon cooling? For the same alloy above, use the inverse lever rule to calculate the %solid and %liquid at 325C
Draw thermal equilibrium diagram for the binary alloy system (Si-Au), from the following data:- a- Silicon melts at 1414 °C, and gold melts at 1064 °C. b-Eutectic is formed at 360°C containing 20 Wt% Si -80 Wt% Au, and identify all phases are present in the diagram c-Determine the amount of each phase for the alloy which consist of 60 Wt% Si- 40Wt % Au at 1200 °C and 800 °C ,then determine the amount of eutectic at 200 °C?
A 10 30 70 1) For an A-B alloy of composition 25 wt% B (i) Draw the microstructure at T (just above the eutectoid temperature) and calculate the fraction of each phase in the microstructure. (ii) Draw the microstructure at T (just below the eutectoid temperature) and determine the amount of each phase, i.e., fraction of proeutectoid alpha, eutectoid alpha and eutectoid beta. 2) Provide a brief summary of phase transformations which are often observed in the iron-carbon alloy system due to various heat treatment procedures carried out to tune the microstructure. Compare mechanical strength and ductility of the materials/microstructures that form as a result of such heat treatment processes.
1-The microstructural design of Iron-Carbon(Fe-C) alloys has led to the development of vast range of steels for structural material applications. The phase diagram provide means for producing specific microstructures. Using the phase diagram below to answer the following questions A – If the liquid mixture of Fe-3%Wt C is slowly cooled from 1600 C to 1200C indicate the phase(S) that are present at 1200 C . Also calculate the composition of the of phases.(10) B-Describe the sequence of all phase transformation that accour from Fe-1.5%wt C is slowly cooled from 1600 C to 400 C. Use the diagram below to to describe the microstructures for each phase transformation (10)
2: Consider a Cu-80wt% Ni-20% alloy, determine the following: (a) The liquidus and solidus temperature of alloy. (b) The composition of last liquid to solidify. (c) The composition of last solid to melt. (d) The composition of the solid and liquid phases at 1175 °C. (Draw the microstructure at this points) (e) The amount of the solid and liquid phases at 1175 °C. Composition (at% Ni) 20 40 60 80 100 1600 2800 1500 Liquid 1453 C 2600 1400E Solidus line Liquidus line 2400 1300 1200 2200 1100 2000 1085 C 1000 20 40 60 80 100 (Cu) Composition (wt% Ni) (Ni) Temperature ("F)
Cite the phases that are present and the phase compositions for the following alloys: 15 wt% Sn–85 wt% Pb at 100°C
5. For 40 wt% Sn – 60 wt% Pb alloy at 150 oC (at point B) as shown in Figure, ii. Calculate the composition(s) of the phase(s) present. iii. Calculate the amount of each phase present in terms of mass fraction. 600 300 Liquid 500 a+L 200 400 300 100 200 100 20 60 80 100 (Pb) (Sn) Composition (wt% Sn) Temperature ("C) Temperat ure ("F)
For alloy A-B of composition Co (C dot) is 33 at some temperature is found to consist of mass fractions of 0.75 and 0.25 for alpha and beta phases respectively. If the composition of the alpha phase is 15wt% B - 85 wt% A, what is the composition of the beta phase?