The passengers, the gondola, and its swing frame have a total mass of 50 Mg, a mass center at G, and a radius of gyration kB = 3.5 m. Additionally, the 3-Mg steel block at A can be considered as a point of concentrated mass. The gondola swings freely at w = 1.4 rad/s when it reaches its lowest point as shown in (Figure 1).

The passengers, the gondola, and its swing frame have a total mass of 50 Mg, a mass center at G, and a radius of gyration kB = 3.5 m. Additionally, the 3-Mg steel block at A can be considered as a point of concentrated mass. The gondola swings freely at w = 1.4 rad/s when it reaches its lowest point as shown in (Figure 1).

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A motorcycle and rider have a combined mass of 350kg. At another point in its journey, the motorcycle and rider travel at 80 km/h around a left-hand bend of radius 30m. Calculate: The angular velocity of each wheel, the moment of inertia of each wheel. The angular momentum of the wheel prior to entering the bend. and the magnitude of the gyroscopic torque produced on the bike as the rider is driving around the bend. What is the effect and why is it important to calculate the gyroscopic torque produced on the bike as the rider is driving around the bend? How can you enhance this system?
Q2: The 5.5-kg lever OA with 250-mm radius of gyration about O is initially at rest in the vertical position (0 = 90°), where the attached spring of stiffness k = 100 N/m is unstretched. Calculate the constant moment M applied to the lever through its shaft at O which will give the lever an angular velocity w = 4 rad/s as the lever reaches the horizontal position = 0. Ans.: M = 2.95 N. CW k= 525 N/m 4 M 375 mm 200 mm 375 mm
The strings AB and AC connect 500-g mass A to the vertical shaft BC. When the shaft rotates with a constant angular velocity of 15 rad/s, the ball has circular motion in the horizontal plane with the strings having angles of ? = 55° shown in the figure. Find the tension forces at the strings AB and AC.
Q-4) The rod, having a weight of 16N and a length of 2.5m, contains a joint at O which is 0.5m distant from point B. The other end of the rod is attached to a 2,5 m- 0,5 m spring that is compressed by 4cm A with Ks= 250N/cm. At this moment the rod is horizontal. When released; calculate it's angular velocity (passing by the vertical position) and reaction forces at the joint 0.
Q4. As shown in the image below, a force of P= 310 N is applied to the 64-kg cart. The dimensions are a = 0.29 m, b = 0.21 m, and c = 0.28 m, and the angle 0 = 26. The mass center of the cart is at point G. Assume the wheels are weightless and free to roll (therefore, friction can be ignored). Take g = 9.81 m/s?. (1) Determine the total normal force at the wheels at A. A FBD and kinetic diagram must be included on your notes. Your answer must include 1 place after the decimal point, and the proper SI unit. P 0.4 m C В 0.08 m
Center of mass by integrals. Finding the position of the center of mass of the pyramid shown in the figure explains step by step how to obtain the differentials y for each momentum x, y, z. show the integrals. without using symmetry
Motorized moving platform is lifting a car with some acceleration. If the combined weight of the lift platform and car is 2800kg, and the motorized lift weight is 200000kg, determine the maximum acceleration of the platform before tipping occurs. Weight of the platform a=2.1m, b = 4m, c = 4.2m, d = 3m FBD of the lift: Vertical lift platform. center of gravity (car) FBD of the car: a C Too center of gravity (lift)
The rotor of a turbojet engine of an aircraft has a mass 180 kg and polar moment of intertia 10 kg.m2 about the rotor axis. The rotor rotates at a constant speed of 1100 rad/s in the clockwise direction when viewed from the front of the aircraft. The aircraft while flying at a speed of 800 km per hour takes a turn with a radius of 1.5 km to the left. The gyroscopic moment exerted by the rotor on the aircraft structure and the direction of motion of the nose when the aircraft turns, are
-. Solid disc with radius R=5 cm and mass M-4,5 kg is hanging on the ceiling. There is a rope wound around the disc. The rope is conducted through an ideal travelling pulley, and the end of the rope is fastened to the ceiling. The mentioned pulley carries a block with mass m=1kg. Find (a) the vertical translational acceleration of the block, (b) K=? force in the rope, (c) F=? force, which holds the disc on the ceiling. K ´R M m
Q. The upper and lower arms of Porter governor are 0.25 m each and are pivoted 30 mm from the axis of rotation. The radius of rotation Is 130 mm. The mass of the ball and sleeve are 3 kg and 38 kg respectively. Find the effort and power of the governor.
For the circular thin plate with a square hole as shown in the image below, its radius R = 0.48 m and the side of the square /= 0.21 m, and the material has a mass per unit area of 12 kg/m2. If at the instant shown, it is subjected to a force P = 38 N, and has a counterclockwise angular velocity of W = 2.6 rad/s, determine magnitude of the support reaction at point O at this instant. Please pay attention: the numbers may change since they are randomized. Your answer must include 2 places after the decimal point, and proper unit. Take g = 9.81 m/s?. R P
The strings AB and AC connect 500-g mass A to the vertical shaft BC. When the shaft rotates with a constant angular velocity of 15 rad/s, the ball has circular motion in the horizontal plane with the strings having angles of a = 55° shown in the figure. Find the tension forces at the strings AB and AC. B 500g 400 mm 400 mm