An increasingly popular trend in mountain biking is to remove the chain and coast down the mountain. This has reduced demand for crank sets, chains, and derailleurs. As aresult, Endo Mountain Bikes Inc. is shutting down its bicycle propulsion plant. It purchased the plant 2 years ago for $310,000. It can sell the plant today for $169, 087.6. Theplant is in Class 43 with a depreciation rate of 30 %. When the plant is closed, Endo's net working capital will decrease by $50,000. EBITDA in the final year is $260,000.Endo's tax rate is 35%, and their cost of capital is 8%. What are the terminal year cash flows? Round your answer to the nearest dollar.

The term "terminal year cash flows" describes the cash flows anticipated to take place at the…

Answered: An increasingly popular trend in…

Financial Management: Theory & Practice

16th Edition

ISBN:9781337909730

Author:Brigham

Publisher:Brigham

Chapter11: Cash Flow Estimation And Risk Analysis

Section: Chapter Questions

Problem 10P: St. Johns River Shipyards welding machine is 15 years old, fully depreciated, and has no salvage...

See similar textbooks

Similar questions

An increasingly popular trend in mountain biking is to remove the chain and coast down the mountain. This has reduced demand for crank sets, chains, and derailleurs. As a result, Endo Mountain Bikes Inc. is shutting down its bicycle propulsion plant. It purchased the plant 2 years ago for $300,000. It can sell the plant today for $153,938.2. The plant is in Class 43 with a depreciation rate of 30%. When the plant is closed, Endo's net working capital will decrease by $50,000. EBITDA in the final year is $250,000. Endo's tax rate is 35%, and their cost of capital is 8%. What are the terminal year cash flows? $
St. Johns River Shipyards welding machine is 15 years old, fully depreciated, and has no salvage value. However, even though it is old, it is still functional as originally designed and can be used for quite a while longer. A new welder will cost 182,500 and have an estimated life of 8 years with no salvage value. The new welder will be much more efficient, however, and this enhanced efficiency will increase earnings before depreciation from 27,000 to 74,000 per year. The new machine will be depreciated over its 5-year MACRS recovery period, so the applicable depreciation rates are 20.00%, 32.00%, 19.20%, 11.52%, 11.52%, and 5.76%. The applicable corporate tax rate is 25%, and the project cost of capital is 12%. What is the NPV if the firm replaces the old welder with the new one?
ABC company is considering replacing their old manual loading machine with an automatic loading machine. The manual machine cost $300,000 three years ago, and is being depreciated over 10 years straight line depreciation, with no salvage value. If ABC replaces the manual machine, the new automatic machine will cost $400,000 and have a useful life of 10 years. This will also be depreciated on a straight line basis to zero. As a result of this new machine, there will be pretax savings of $130,000 in labour costs and $25,000 in other cash expenses annually. If the automatic machine is purchased, the old machine will immediately be sold at a price of $280,000. The company has already spent $15,000 researching the costs associated with this decision. The company's tax rate is 40% and no inflation is expected. The company's cost of capital is 7%. Calculate the net present value of this decision using a financial calulator
Bangor Moving Company is thinking of opening a new warehouse, and the key data are shown below. The company owns the building that would be used, and it could sell it for $100,000 after taxes if it decides not to open the new warehouse. The equipment for the project would be depreciated by the straight-line method over the project's 3-year life, after which it would be worth nothing and thus it would have a zero salvage value. No new working capital would be required, and revenues and other operating costs would be constant over the project's 3-year life. What is the project's NPV? (Hint: Cash flows are constant in Years 1-3.) Project cost of capital (r)10.0%Opportunity cost$100,000Net equipment cost (depreciable basis)$65,000Straight-line deprec. rate for equipment33.333%Sales revenues, each year$123,000Operating costs (excl. deprec.), each year$25,000Tax rate25%
The Bigbee Bottling Company is contemplating the replacement of one of its bottling machines with a newerand more efficient one. The old machine has a book value of $600,000 and a remaining useful life of 5 years.The firm does not expect to realize any return from scrapping the old machine in 5 years, but it can sell itnow to another firm in the industry for $265,000. The old machine is being depreciated toward a zerosalvage value, or by $120,000 per year, using the straight-line method. The new machine has a purchaseprice of $1,175,000, an estimated useful life 6 year and fall under 5 years MACRS, and an estimated salvagevalue of $145,000. The applicable depreciation rates are 20 percent, 32 percent, 19 percent, 12 percent, 11percent, and 6 percent. It is expected to economize on electric power usage, labor, and repair costs, as well asto reduce the number of defective bottles. In total, an annual savings of $255,000 will be realized if the newmachine is installed. The company’s…
A CNC machine was purchased 2 years ago for $16,000; now it has been depreciated by straight line depreciation using a 4-year life and zero savage value. Because of recent innovation in the machining technology the current price of the machine has been reduced to $12,000. Market value of the used old machine is $3,000. Considering the replacement analysis what should be the value of the machine, justify your findings on a report with references. This provides evidence for [CLO 2]
St. Johns River Shipyards' welding machine is 15 years old, fully depreciated, and has no salvage value. However, even though it is old, it is still functional as originally designed and can be used for quite a while longer. A new welder will cost $180,000 and have an estimated life of 8 years with no salvage value. The new welder will be much more efficient, however, and this enhanced efficiency will increase earnings before depreciation from $27,000 to $81,000 per year. The new machine will be depreciated over its 5-year MACRS recovery period, so the applicable depreciation rates are 20.00%, 32.00 %, 19.20 %, 11.52%, 11.52%, and 5.76%. The applicable corporate tax rate is 25%, and the project cost of capital is 10%. What is the NPV if the firm replaces the old welder with the new one? Do not round intermediate calculations. Round your answer to the nearest dollar. Negative value, if any, should be indicated by a minus sign. $
A packaging factory is considering the replacement of some equipment. The new plan is to install equipment to produce a new can that uses less energy and less metal than the old one. Current equipment was installed 5 years ago for $100 million and can be sold for $35 million. Due to obsolescence the depreciation of this equipment results in an annual depreciation of $4 million for the next years. If you keep this equipment for one more year your operating and maintenance costs will be $65 million increasing by $3 million/year each year thereafter. The new equipment will cost $130 million, with an economic life of 8 years and a salvage value of $10 million. Its operating and maintenance costs will be $49 million. For a TMAR = 15% p.a. what new equipment should be installed? Make a recommendation about it. (Answer: The solution would be to use the current equipment for another two years and then exchange it for new equipment.
St. Johns River Shipyard’s welding machine is 15 years old, fully depreciated, and has no salvage value. However, even though it is old, it is still functional as originally designed and can be used for quite a while longer. A new welder will cost $182,500 and have an estimated life of 8 years with no salvage value. The new welder will be much more efficient,however, and this enhanced efficiency will increase earnings before depreciation from $27,000 to $74,000 per year. The new machine will be depreciated over its 5-year MACRS recovery period, so the applicable depreciation rates are 20.00%, 32.00%, 19.20%, 11.52%, 11.52%, and 5.76%. The applicable corporate tax rate is 25%, and the project cost of capital is 12%. What is the NPV if the firm replaces the old welder with the new one?
The Bigbee Bottling Company is contemplating the replacement of one of its bottling machines with a newer and more efficient one. The old machine has a book value of $550,000 and a remaining useful life of 5 years. The firm does not expect to realize any return from scrapping the old machine in 5 years, but it can sell it now to another firm in the industry for $250,000. The old machine is being depreciated by $110,000 per year, using the straight-line method. The new machine has a purchase price of $1,100,000, an estimated useful life and MACRS class life of 5 years, and an estimated salvage value of $160,000. The applicable depreciation rates are 20%, 32%, 19%, 12%, 11%, and 6%. It is expected to economize on electric power usage, labor, and repair costs, as well as to reduce the number of defective bottles. In total, an annual savings of $245,000 will be realized if the new machine is installed. The company's marginal tax rate is 35%, and it has a 12% WACC. a. What initial cash…
t. Johns River Shipyards' welding machine is 15 years old, fully depreciated, and has no salvage value. However, even though it is old, it is still functional as originally designed and can be used for quite a while longer. A new welder will cost $182,500 and have an estimated life of 8 years with no salvage value. The new welder will be much more efficient, however, and this enhanced efficiency will increase earnings before depreciation from $29,000 to $78,500 per year. The new machine will be depreciated over its 5-year MACRS recovery period, so the applicable depreciation rates are 20.00%, 32.00%, 19.20%, 11.52%, 11.52%, and 5.76%. The applicable corporate tax rate is 25%, and the project cost of capital is 25%, and the project cost of capital is 15%. What is the NPV if the firm replaces the old welder with the new one? Do not round intermediate calculations. Round your answer to the nearest dollar. Negative value, if any, should be indicated by a minus sign.
St. Johns River Shipyards' welding machine is 15 years old, fully depreciated, and has no salvage value. However, even though it is old, it is still functional as originally designed and can be used for quite a while longer. A new welder will cost $181, 500 and have an estimated life of 8 years with no salvage value. The new welder will be much more efficient, however, and this enhanced efficiency will increase earnings before depreciation from $28,000 to $73, 500 per year. The new machine will be depreciated over its 5- year MACRS recovery period, so the applicable depreciation rates are 20.00%, 32.00%, 19.20%, 11.52 %, 11.52 %, and 5.76%. The applicable corporate tax rate is 25%, and the project cost of capital is 10%. What is the NPV if the firm replaces the old welder with the new one? Do not round intermediate calculations. Round your answer to the nearest dollar. Negative value, if any, should be indicated by a minus sign. F1 Inflation Adjustments The Rodriguez Company is…

SEE MORE QUESTIONS

Recommended textbooks for you

Financial Management: Theory & Practice

Finance

ISBN:

9781337909730

Author:

Brigham

Publisher:

Cengage

Financial Management: Theory & Practice

Finance

ISBN:

9781337909730

Author:

Brigham

Publisher:

Cengage

SEE MORE TEXTBOOKS