Which of the following statements is true about NIC (Network Interface Card)? There might be multiple correct answers. When operating in "promiscuous" mode, NIC passes every frame received from the network to the kernel. Each NIC has a MAC address. Each NIC has a hardcoded IP address. NIC checks the destination address for every packet, if the address matches the cards MAC address, it is further copied into a buffer in the kernel. Every NIC on the network will hear all the frames on the wire.
Q: Assume Host C is running a Web server on port 80. Assume that Hosts A and B are currently submitting…
A: A web server processes and replies to HTTP and other client requests. The primary function of a web…
Q: Each of the following is true regarding TCP SYN port scanning except_______. a. it uses FIN…
A: To be determine: Select right option
Q: After establishing a connection with the local DNS server PC1 now knows the IP and MAC addresses of…
A: Below is the answer to above question. I hope this will be helpful or you...
Q: lo send an Ethernet frame to a destination server that is two router hops away, your client computer…
A: class C network use a default subnet of 255.255.255.0 and it has 192-223 as their first octet. To…
Q: Q9- DHCP Operation between Client and Server is done in the following sequence: * a. DHCP Discover,…
A: As per our policy, "Since you have asked multiple questions, we will solve the first question for…
Q: As shown in the figure below, computer A will send a data packet to computer B, which is in a…
A: Given network diagram contains 2 different networks which are connected through a Router R and each…
Q: When you do a scan on your system, you find a session with a host at the address 208.85.40.44:443.…
A: Given: When you do a scan on your system, you find a session with a host at the address…
Q: the number of available addresses on a network by the Supernetting hosts ID. 16 Choose one a.…
A: Supernetting is a process of combining small networks into big networks. It is also called as…
Q: What is the MAC address that is used to send a frame to every local Ethernet devic 译 OFF00.0000…
A: Here in this question we have asked that what is the mac addresses that is used to send a frame to…
Q: In a network, the local hosts are able to communicate only within the LAN, but are not able to…
A: In a network, the local hosts are able to communicate only within the LAN, but are not able to…
Q: Since a gateway (NAT) router only has one public IP address, but may forward packets from many…
A: We are going to understand how NAT works and how NAT could remember these many IP addresses to…
Q: /hen host A successful send the datagram to H, switch s1, s2, s3, s4 will have oth host A and Host…
A: NOT TRUE: When host A successful send the datagram to H, switch s1, s2, s3, s4will have both host A…
Q: Packet tracer has a command to define a port's maximum MAC address count, so keep that in mind.
A: Explanation: The idea of switch port security is implemented, which enables the user to block access…
Q: write an access control list which should only allow 192.168.10.0 & 192.167.10.0 & 192.166.10.0 to…
A: write an access control list which should only allow 192.168.10.0 & 192.167.10.0 &…
Q: You are required, in your capacity as a network trainer for a big company, to provide an in-depth…
A: Given: Before delivering an Ethernet frame, the switch examines a source address table (SAT). MAC…
Q: A vulnerability of TCP is that many TCP SYN segments can be sent from many different remote…
A: According to the information given:- We have to choose the correct option to satisfy the statement.…
Q: - Two UDP segments are to be sent. The first segment has source IP address 11, estination IP address…
A: The socket is a combination of (IP address, port number) The socket for 1st segment is (33, 1111)…
Q: plement a network service involving sockets where servers and clients authenticate themselves and…
A: This module provides access to the encryption and peer authentication functions of Transport Layer…
Q: Configure the following VLans having two switches: Switch 1: 1. VLan 40, Dept. HR 2. VLan 50, Dept.…
A: V LAN is a virtual LAN in this physically system can be placed anywhere but they are logically…
Q: IP:222.222.222.220 88-B2-2F-54-lA-OF 5c-66-AB-90-75-B1 IP: 222.222.222.221 IP:222.222.222.223 B…
A: 1. It is not valid MAC address The format of MAC address is x0‑xx‑xx‑xx‑xx‑xx Given MAC address:…
Q: Only one of the claims below is correct, the others are wrong or meaningless. Select the correct…
A: The question is to choose the correct statement among the given statements.
Q: "When a switch uses the store-and-forward switching mechanism, it decides on fast forwarding based…
A: Introduction: This switching strategy, known as store-and-forward switching, waits until all of the…
Q: Following which statements are correct about DR/BDR routers in an OSPF area? DR/BDR is primarily…
A: In order to minimize the number of repetitions of the information that flows in the network, In an…
Q: What is the need to IP address? why not to simply use MAC addresses?
A: Answer is given below .
Q: There are three hosts X, Y, and Z. Hosts X and Y are located at Central Park and Times Square…
A: What is a UDP socket? UDP socket routines enable simple IP communication using the user datagram…
Q: In the following MAC protocols, which one performs the worst in terms of throughput per packet time?…
A: The throughput per packet time is lowest for pure ALOHA, so it performs worst.
Q: Build the following in Packet Tracer. When complete upload here. • Use network 100.100.100.0/24 as…
A:
Q: For the network you have created this lab, we want to now block any packets from the client from…
A: packet filtering firewalls can be used to block the packets from client Packet-filtering firewalls…
Q: If one of the stations is unplugged in bus topology this will interrupts the rest of the network?…
A: 3) answer is FALSE In bus topology unplugging one station then another station will be available.…
Q: Edit TCP Wrappers access control files as appropriate and allow user1 and user3 from 192.168.1 and…
A: 1. To allow user1 and user 3 from the 192.168.1 and example.net to access vsftpd : # vi…
Q: Can you find any problem with the following statement? "In a network (let Network Address…
A: Given: "In a network (let Network Address 101.10.0.0/25 is using for 120 hosts network) a station is…
Q: Think about the Scenario network. Assume that all hosts A and B have such a configuration. timeout…
A: Introduction: As a result, this section covers dial-up connection via the Proxy Server's Auto Dial…
Q: bps, where S=10-R. Further suppose that the TCP receive buffer is large enough to hold the entire…
A: The answer is..
Q: Lapfopo Lapop2 120 hosts Switcho 61 Hosts vitch 1 30 Hosts 15 Hosts Swich2 Swich3 R2 R3 Sample MAC…
A: Given the following topology.By calculating a network address yourself(Calculation process:First…
Q: When you do a system scan, you'll notice a session with a host at 208.85.40.44:443. For this…
A: Given:, When you do a scan on your system, you find a session with a host at the address…
Q: A vulnerability of TCP is that many TCP SYN segments can be sent from many different remote…
A: According to the information given:- We have to choose the correct option to satisfy the statement.…
Q: Set up the following: There are two switches on VLans: Switch 1) VLan 10, Dept. Admin (Ports:…
A: We will use Cisco Packet Tracer to solve the given networking problem.
Q: The maximum value of a TTL for a DNS resource record (RR) is 2147483647 seconds. What is the primary…
A: The answer is
Q: CP multiplexing and demultiplexing. Consider the figure below, with 6 sockets shown across the…
A:
Q: In IEEE 802.11, two-way communication is used to authenticate an open system. In order to…
A: Answer : 1.) Open System Authentication is the process by which a computer can gain access to a…
Q: Question 7: Which statement is false? 1. PING is a TCP/IP application that sends datagrams once…
A: Ping is defined as one of the primary TCP/IP command that is used for troubleshooting connectivity,…
Q: An attacker is sending packets to the target with the URG flag set in order to scan the target…
A: a) type of scanning b) target port respondence if port is open c) response if target is closed
Q: An attacker wants to carry out a denial-of-service (DoS) attack by 'squeezing out' TCP flows in a…
A: Dear Student, A TCP attack can be as effective as UDP attack it is found in an independent research…
Q: Assume that the flags in a TCP packet are set in the order of [ cwr | ece | urg | ack | psh | rst |…
A: a Scapy command to perform "FIN" scan two ports 4000 and 4050 of the destination with IP address,…
Q: answer all the three choosing the answer option. Thanks a lot in advance. 54) ___________ A passive…
A: A passive IDS is a type of system which is designed for only monitoring and analyzing activity of…
Q: Question 6 It is possible for two TCP segments with the same source port address to be sent by the…
A: When multiple TCP clients send TCP segment with the same destination port number to a receiving host…
Q: Enable OSPF on the routers in the provided Packet Tracer file as follows: • All three routers use…
A: As a link-state protocol, OSPF is designed to not only find the fastest available route, it is…
Which of the following statements is true about NIC (Network Interface Card)? There might be multiple correct answers.
When operating in "promiscuous" mode, NIC passes every frame received from the network to the kernel.
Each NIC has a MAC address.
Each NIC has a hardcoded IP address.
NIC checks the destination address for every packet, if the address matches the cards MAC address, it is further copied into a buffer in the kernel.
Every NIC on the network will hear all the frames on the wire.
Trending now
This is a popular solution!
Step by step
Solved in 2 steps
- Computer Science Networks and should be done in C language. Create a UDP client and server program that not only is able to locally transfer files but it gives the client the ability to send multiple copies of the file to multiple servers. Once the server program is initiated, it waits until it receives client packets. It then reads and saves the payload of the packets. The client reads a file from the disk and sends it to each server over a UDP socket by breaking the file up into mtu-byte sized packets. Client needs to be concurrent in sending the packets to all of the servers using threadsIn IEEE 802.11, two-way communication is used to authenticate an open system. In order to authenticate the client, the server must give the station ID (typically the MAC address). Response to the client's previous request is either a successful or failed authentication response from the access point/router. An error may arise if, for example, an AP/router configuration does not include the client's MAC address.In what ways is it advantageous to use this kind of authentication scheme?In what ways does this authentication technique have security vulnerabilities that might be mitigated?The secure socket layer (SSL) protocol allows for secure communication between a client and a server. There are known flaws in the SSLv2 protocol. A man-in-the-middle attacker can force the communication to a less secure level and then attempt break the encryption. The attacker can also truncate encrypted messages. These flaws have been fixed in SSLv3 (TLSv1). Most servers and clients support both SSLv2 and SSLv3. However, SSLv2 is enabled by default for backward compatibility. Answer the following questions, a) Find out the impact in the above statement. b) What is the solution? c) Do you think SSLv3 is more secure? Justify your answer.
- Three-way handshake is used by a TCP client and a TCP server to establish a connection, as illustrated below: 1st: client:port1 -> server:port2, SYN 2nd: server:port2 -> client:port1, SYNACK 3rd: client:port1 -> server:port2, ACK When this client is performing scanning attacks, it will generated a large number of failed connections. In each failed connection, the three-way handshake fails to complete. People commonly use SYN together with the absence of its corresponding SYNACK in this same TCP session to identify whether this connection is failed. By investigating the failed connections, an engineer finds that in legitimate/benign cases, if the server does not return SYNACK to the client, the client will not send the ACK packet after SYNACK (e.g., the 3rd packet above). Therefore, this engineer suggests that we can count the failed connections based on the following rules without considering SYNACK:Three-way handshake is used by a TCP client and a TCP server to establish a connection, as illustrated below: 1st: client:port1 -> server:port2, SYN 2nd: server:port2 -> client:port1, SYNACK 3rd: client:port1 -> server:port2, ACK When this client is performing scanning attacks, it will generated a large number of failed connections. In each failed connection, the three-way handshake fails to complete. People commonly use SYN together with the absence of its corresponding SYNACK in this same TCP session to identify whether this connection is failed. By investigating the failed connections, an engineer finds that in legitimate/benign cases, if the server does not return SYNACK to the client, the client will not send the ACK packet after SYNACK (e.g., the 3rd packet above). Therefore, this engineer suggests that we can count the failed connections based on the following rules without considering SYNACK: If a client:port1 sends…Please write the steps to set up a server as DHCP server according to the following conditions: Setting up the Account Server Set the DHCP service onCreate a DHCP pool where:Pool Name: Your Name (Ex: Lionel Messi)Start IP address: Your ID (Ex: 20.22.12.18)
- Kerberos is a protocol that is based around Needham-Schroeder protocol for many to many authentications. Now answer the following questions. (Use necessary diagrams to justify your answers) i) Explain why the password of the user is not sent over the network and instead session keys are generated and shared in the Kerberos protocol. ii) The information in a TGT (Ticket Granting Ticket) is encrypted so the client cannot access the information in the TGT. However, all information in the ticket is already known to the client. Why is it still necessary to encrypt it? iii) Describe the working mechanism of how a ticket is generated between the client and server by the TGS (Ticket Granting Server) and how it is used for client-server communication.Server reply (UDP). How does the networked application running on a server know the client IP address and the port number to reply to in response to a received datagram? As the result of performing the accept () statement, the server has created a new socket that is bound to that specific client, and so sending into this new socket (without explicitly specifying the client IP address and port number) is sufficient to ensure that the sent data will be addressed to the correct client. The server will know the port number being used by the client since all services have a well-known port number. The application code at the server determines client IP address and port # from the initial segment sent by client, and must explicitly specify these values when sending into a socket back to that client. The server will query the DNS to learn the IP address of the client. Not quite. Your answer isn't correct.When multiple UDP clients send UDP segments to the same destination port number at the receiving host, those segment (from different senders) will always be directed to the same socket at the receiving host. A True False
- When HTTP streaming is being used, are the TCP receive buffer and the application buffer on the client both the same thing? If they are unable to speak with one another, it is unclear how they will behave toward one another.Most IP datagram reassembly algorithms have a timer to avoid having a lost fragment tie up reassembly buffers forever. Suppose that a datagram is fragmented into four fragments. The first three fragments arrive, but the last one is delayed. Eventually, the timer goes off and the three fragments in the receiver's memory are discarded. A little later, the last fragment stumbles in. What should be done with it?R6Fragmentation of an IP datagram takes place if its size is larger than the MTU of the subnet over which the datagram will be routed. Most IP datagram reassembly algorithms have a timer to avoid having a lost fragment tie up reassembly buffers forever. Suppose a datagram is fragmented into four fragments. The first three fragments arrive, but the last one is delayed. Eventually the timer goes off and the three fragments in the receiver's memory are discarded. A little later, the last fragment stumbles in. What should be done with it?