The wall of a furnace has a thickness of 5 cm and thermal conductivity of 0.7 W/m-°C. The inside surface is heated by convection with a hot gas at 402°C and a heat transfer coefficient of 37 W/m-°C. The outside surface has an emissivity of 0.8 and is exposed to air at 27°C with a heat transfer coefficient of 20 W/m-°C. Assume that the furnace is inside a large room with walls, floor and ceiling at 27°C. Show the thermal circuit and determine the heat flux through the furnace wall.

The wall of a furnace has a thickness of 5 cm and thermal conductivity of 0.7 W/m-°C. The inside surface is heated by convection with a hot gas at 402°C and a heat transfer coefficient of 37 W/m-°C. The outside surface has an emissivity of 0.8 and is exposed to air at 27°C with a heat transfer coefficient of 20 W/m-°C. Assume that the furnace is inside a large room with walls, floor and ceiling at 27°C. Show the thermal circuit and determine the heat flux through the furnace wall.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter1: Basic Modes Of Heat Transfer

Section: Chapter Questions

Problem 1.19P: 1.19 A cryogenic fluid is stored in a 0.3-m-diameter spherical container is still air. If the...

See similar textbooks

Similar questions

1.60 Two electric resistance heaters with a 20 cm length and a 2 cm diameter are inserted into a well-insulated 40-L tank of water that is initially at 300 K. If each heater dissipates 500 W, what is the time required for bringing the water temperature in the tank to 340 K? State your assumption for your analysis.
1.29 A spherical interplanetary probe with a 30-cm diameter contains electronic equipment that dissipates 100 W. If the probe surface has an emissivity of 0.8, what is its surface temperature in outer space? State your assumptions in the calculations.
A pipe carrying superheated steam in a basement at 10C has a surface temperature of 150C. Heat loss from the pipe occurs by radiation (=0.6) and natural convection (hc=25W/m2K). Determine the percentage of the total heat loss by these two mechanisms.
Heat is transferred at a rate of 0.1 kW through glass wool insulation (density=100kg/m3) with a 5-cm thickness and 2-m2 area. If the hot surface is at 70C, determine the temperature of the cooler surface.
Consider a furnace (as a plane wall) which has a thickness of 15 cm and a surface area of 1 m?. The inside surface of the furnace wall (the hot left side of the wall) is at temperature T1. The furnace wall is made of brick with thermal conductivity of 1.198 W/m.K. The outside surface of the furnace wall (the right side of the wall) has a surface emissivity of 0.8 and is maintained at T2=101 °C and subject to air at 25 °C with convection heat transfer coefficient of 20 W/m?.K. The surroundings temperature at the outside of the furnace wall is at 25 °C. Required: Draw a clear and consistent schematic of the problem and label the operating conditions on the schematic. Perform systematic analysis, state your assumptions and justify the equation used and determine the following (circle your final answers): (i) The rate of heat transfer by convection (in W); (ii) The rate of heat radiation (in W); (iii) The surface temperature of the furnace wall T1 (in °C); (iv) The rate of conduction heat…
Consider a person standing in a roomn at 20°C with an exposed surface area of 1.5 m2. The deep body temperature of the human body is 37°C, and the thermal conductivity of the human tissue near the skin is about 0.3 W/m-°C. The body is losing heat at a rate of 150 W by natural convection and radiation to the surroundings. Taking the body temperature 0.5 cm beneath the skin to be 37°C, determine the skin temperature of the person. °C
To warm up some milk in a thin-walled glass cylindrical container whose diameter is 6 cm. The height of the milk in the glass is 7 cm. The milk container is placed into a large pan filled with hot water at 60°C. The milk is stirred constantly, so that its temperature is uniform at all times. If the heat transfer coefficient between the water and the glass is 120 W/m2.°C, determine how long it will take for the milk to warm up from 3°C to 38°C. Take the properties of the milk to be the same as those of water. Can the milk in this case be treated as a lumped system? Use the lumped system analysis to solve the problem. The properties of water and milk at 20°C are, k = 0.607 W/m.°C,p=998 kg/m', and C, = 4.182 kJ/kg.°C. Answer: 5.8 min. ملاحظه: تكون هنا قيمة (0.1 < Bi( ويفترض لايطبق التحليل الكتلي , ولكن استخدم نفس التحليل والمعادلات في المحاضرة وكذلك في المثال لان الحليب يخلط باستمرار ولذلك تكون درجة حرارته منتظمه و متغيره مع الزمن لانه يكتسب حراره من الماء ويسخن وترتفع درجة حرارته مع…
A glass window in a storefront has an are of 12m2 and a thickness of 1 cm. The thermal conductivity of the glass is 0.8 W/m-oC. On the cold day, outside surface temperature of the glass is -1oC and the inside surface temperature is 3 oC. Determine the temperature at a plane midway between the inside and outside glass surfaces.
A person stands in a breezy room whose temperature is 20 °C. The emissivity of the person is 0.35. Determine the total rate of heat transfer from this person if the exposed surface area and the average surface temperature of the person are 1.6 m2 and 29 °C respectively. Take the convection heat transfer coefficient to be 6.5 W/m2/K and that the surrounding wall of the room is at a temperature of 20 oC. Select one: A 123.7 W B. 86.4 W C. 151.7 W D. 100.5 W E 43.0 W
Q2/ A 4-m-internal-diameter spherical tank made of 1.75-cm-thick stainless steel (k 15 W/m °C) is used to store iced water at 0°C. The tank is located in a room whose temperature is 35°C. The walls of the room are also at 35°C. The outer surface of the tank is black, and heat transfer between the outer surface of the tank and the surroundings is by natural convection and radiation. The convection heat transfer coefficients at the inner and the outer surfaces of the tank are 80 W/m2 °C and 10 W/m2· °C, respectively. Determine (a) the rate of heat transfer to the iced water in the tank and (b) the amount of ice at 0°C that melts during a l-h period. The heat of fusion of water at atmospheric pressure is hif 334 kJ/kg.
A glass window inside storefront has an are of 12m2 and a thickness of 1 cm. The thermal conductivity of the glass is 0.8 W/m-oC. On the cold day, outside surface temperature of the glass is -1oC and the inside surface temperature is 3 oC. Determine the temperature at a plane midway between the inside and outside glass surfaces.
A 2-m-long, 4-cm-diameter electrical wire extends across a room at 20°C, as Shown in Fig. below. Heat is generated in the wire due to resistance heating, and the surface temperature of the wire is measured to be 252°C in steady operation. Also, the voltage drop and electric current through the wire are measured to be 80 V and 2 A, respectively. Heat loss transfer by radiation was 40 W from the surface of the wire. Heat transfer coefficient for heat 20 C transfer between the outer surface of the wire and the air in the room. 2 80 V T 252 If the heat generation by electrical wire increased up to 200 W, what is the surface temperature of the wire, assuming no change heat transfer coefficient?