The turbine develops 150 kW of power, which istransmitted to the gears such that C receives 70% andD receives 30%. The rotation of the 100-mm-diameterA-36 steel shaft is a 750 rev/min. The journalbearing at E allows the shaft to turn freely about its axis.The shear modulus of elasticity for A-36 steel is 75 GPa.(Figure 1)Figure1 of 1Part ADetermine the absolute maximum shear stress in the shaft.Express your answer to three significant figures and include the appropriate units.Tax ValueSubmitPart B$8/0SubmitRequest AnswerDetermine the angle of twist of end E of the shaft relative to BExpress your answer using three significant figures.Provide FeedbackVAXUnitsRequest Answer?Ivec 4?rad

Answered: Image /qna-images/answer/d643d9a2-a4ac-4c79-80ed-6d7d5e552c0c.jpg

The turbine develops 150 kW of power, which is transmitted to the gears such that C receives 70% and D receives 30%. The rotation of the 100-mm-diameter A-36 steel shaft is a 750 rev/min. The journal bearing at E allows the shaft to turn freely about its axis. The shear modulus of elasticity for A-36 steel is 75 GPa. (Figure 1) Figure < 1 of 1 Determine the absolute maximum shear stress in the shaft. Express your answer to three significant figures and include the appropriate units. Submit Part B $E/B Submit Value Provide Feedback Request Answer Determine the angle of twist of end E of the shaft relative to B. Express your answer using three significant figures. VAE Ivec Units Request Answer ? ? rad

The turbine develops 150 kW of power, which is transmitted to the gears such that C receives 70% and D receives 30%. The rotation of the 100-mm-diameter A-36 steel shaft is a 750 rev/min. The journal bearing at E allows the shaft to turn freely about its axis. The shear modulus of elasticity for A-36 steel is 75 GPa. (Figure 1) Figure < 1 of 1 Determine the absolute maximum shear stress in the shaft. Express your answer to three significant figures and include the appropriate units. Submit Part B $E/B Submit Value Provide Feedback Request Answer Determine the angle of twist of end E of the shaft relative to B. Express your answer using three significant figures. VAE Ivec Units Request Answer ? ? rad

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.7.12P

See similar textbooks

Similar questions

The solid steel shaft is supported by the frictionless customer on D and E. This system The mile provided 5 kW of power in w dev / second and was connected to a motor at C. wwww ww www ww ww www wwwm www w A and B If gears get primary 2 kW and 3 kW, determine the minimum shaft diameter. w rotation speed and The safety shear stress is known and is included in the table below. pictures. wwww ww wwwwwwwww www wwwwww wwwwwwww wwwwwwwww w(cycle/second) = 100 tem(Mpa) = 40 3 kW 5 kW 2 kW A D B E C _
The four gears shown are attached to a steel shaft that is rotating at 2 Hz. Gear B supplies 70 kW of power to the shaft. Of that power, 20kW are used by gear A, 20 kW by gear C and 30kW by gear D. G=83 GPa for steel -20KW JOKN -20kw -30kW 2m 1.5m 1.5m B (a) If a uniform shaft diameter of 125 mm B speci fied, detenmine the angle of rotation of A relative to D. O f segment Co is to be replaced lay a hollaw Shaft with an inside diameter of 80 mm, what is the outside diameter if the stress is not to excced 70 MPa.
The four gears shown are attached to a steel shaft that is rotating at 2 Hz. Gear B supplies 70 kW of power to the shaft. Of that power, 20kW are used by gear A, 20 kW by gear C and 30kW by gear D. -20KW 7OKN -20kw -30kW 2m 1.5m 1.5m B (a) If a uniform shaft diameter of 125 mm B speci fied, detenmine the angle of rotation of A relative to D. O If segment Co is to be replaced ay a hollaw Shaft with an inside diameter of 80 mm, what is the outside diameter if the stress is not to excced 70 MPa.
The solid steel shaft DF has a diameter of 25 mm and is supported by smooth bearings at D and E. It is coupled to a motor at F, which delivers 12 kW of power to the shaft while it is turning at 60 rev/s. The gears A, B, and C remove 3 kW, 4 kW, and 5 kW respectively. The shaft is free to turn in its support bearings D and E. (Figure 1) Figure D 3 kW 4 kW A B 5 kW 25 mm CEF 1 of 1 12 kW Part A Determine the absolute maximum shear stress developed in the shaft. Express your answer to three significant figures and include the appropriate units. Tabs max Submit = 16.75 Provide Feedback μĂ |MPa Previous Answers Request Answer X Incorrect; Try Again; 4 attempts remaining ?
Q: Part A: Determine the absolute maximum shear stress in the shaft. Part B: Determine the angle of twist of end EE of the shaft relative to BB. Given: The turbine develops 150 kW of power, which is transmitted to the gears such that CC receives 70% and DD receives 30%. The rotation of the 100-mm diameter A-36 steel shaft is ωomega = 600 rev/min . The journal bearing at EE allows the shaft to turn freely about its axis. The shear modulus of elasticity for A-36 steel is 75 GPa.
The shaft ABC shown in the figure is drivenby a motor that delivers 300 kW at a rotational speedof 32 Hz. The gears at B and C take out 120 kW and180 kW, respectively. The lengths of the two parts ofthe shaft are L1 = 1.5 m and L2 = 0.9 m.Determine the required diameter d of the shaft ifthe allowable shear stress is 50 MPa, the allowableangle of twist between points A and C is 4.0°, andG = 75 GPa.
STRENGTH OF MATERIALS. Please show the complete solutions. Rate will be given. Answer in 3 decimal places! The steel shaft DF consists of three concentric tubes and is supported by smooth bearings at D and E. It is coupled to a motor at F, which delivers 14 kW of power to the shaft while it is running at 52 rev/sec. The gears A, B, and C remove 3 kW, 5 kW, and 6 kW, respectively. The shaft is free to turn in its support bearings D and F. Determine the shearing stress developed in segments BC and CE.
The solid steel shaft is supported by frictionless bearings in D and E. This system is connected to a motor that provides 5 kW of power to the shaft while rotating at w = 75 rpm. If A and B gears get 2 kW and 3 kW respectively, determine the minimum shaft diameter. w rotation speed and safety shear stress τem = 35MPa are known and given in the table with your names below.
A motor drives a shaft at 300 rpm and a power output of 100 kW. The shaft is made of A-36 steel and has diameter 128 mm. There are two gears at B and C and power is transmitted to them equally. The bearing at D can be taken to be frictionless. Calculate the maximum shear stress in the shaft, and the angle of twist of D relative to A. The lengths are 2 m, L2 = 3 m, and L3 = 3.5 m. L₁ = A B 030/ 2021 Cathy Zupke X ↳₂ The maximum shear stress is Tmax= 60.9 X MPa The angle of twist (in degrees) between A and D is A/D 58.2 O C
In the figure, shaft AB transmits power to shaft CD through a set of bevel gears contacting at point E. The contactforce at E on the gear of shaft CD is determined to be (FE)CD = –92.8i – 362.8j + 808.0k lbf. For shaft AB: (a) draw afree-body diagram and determine the reactions at C and D assuming simple supports (assume also that bearing Acarries the thrust load), (b) draw the shear-force and bending-moment diagrams, (c) for the critical stress element,determine the torsional shear stress, the bending stress, and the axial stress, and (d) for the critical stress element,determine the principal stresses and the maximum shear stress.
The motor A delivers 3000 hp to the shaft at 1500 rev/min, of which 1000 hp is removed by gear B and 2000 hp is removed by gear C. 1.) Determine the maximum shear stress in the shaft in ksi. (Answer in 2 decimal places) 2.) Determine the angle of twist in degrees of end D relative to end A. Use G = 12 x 106 psi for steel, and assume that friction at bearing D is negligible. (Answer in 3 decimal places)
Determine the diameter of a solid steel shaft which will transmit 112.5 kW at 200 rpm. Also determine the length of the shaft if the twist must not exceed 1.5o over the entire length. The maximum shear stress is limited to 55 N/mm2. Take the value of modulus of rigidity = 8 x 104 N/mm2.