Steam enters a turbine operating at steady state with a mass flow of 10 kg/min, a specific enthalpy of 3100 kJ/kg, and a velocity of 30 m/s. At the exit, the specific enthalpy is 2300 kJ/kg and the velocity is 45 m/s. The elevation of the inlet is 3 m higher than at the exit. Heat transfer from the turbine to its surroundings occurs at a rate of 1.1 kJ per kg of steam flowing. Let g = 9.81 m/s². Determine the power developed by the turbine, in kW.

Steam enters a turbine operating at steady state with a mass flow of 10 kg/min, a specific enthalpy of 3100 kJ/kg, and a velocity of 30 m/s. At the exit, the specific enthalpy is 2300 kJ/kg and the velocity is 45 m/s. The elevation of the inlet is 3 m higher than at the exit. Heat transfer from the turbine to its surroundings occurs at a rate of 1.1 kJ per kg of steam flowing. Let g = 9.81 m/s². Determine the power developed by the turbine, in kW.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

a. Air at 8 bar 100°C flows in a duct of 15 cm diameter at rate of 150 kg/min. It is throttled by upto 4 bar pressure. Determine the velocity of air after throttling and also show that enthalpy constant before and after throttling. b, Ans. 37.8 m/s 1. Determine the power required by a compressor designed to compress atmospheric through inlet area of 90 cm? with velocity of 50 m/s and leaves with velocity of 120 m/s from exit area of 5 cm?. Consider heat losses to environment to be 10% of power input to compressor. Ans. 50.4 kw C' Determine the power available from a steam turbine with following details; Steam flow rate = 1 kg/s Velocity at inlet and exit = 100 m/s and 150 m/s Enthalpy at inlet and exit = 2900 kJ/kg, 1600 k]/kg Change in potential energy may be assumed negligible. Ans. 1293.75 kw d. Determine the heat transfer in emptying of a rigid tank of 1 m² volume containing air at 3 bar and 27°C initially. Air is allowed to escape slowly by opening a valve until the pressure in…
Steam enters a turbine operating at steady state with a mass flow rate 1.28 kg/s. The power output of the turbine is 100kW. The inlet the enthalpy is given as 3177.2 KJ/kg. At the exit the pressure is 10 kPa and the quality is 90%. the change in kinetic energy between the inlet and outlet is negligible. calculate the heat transfer from the turbine to the surroundings
1. A horizontal "hot air blower" consists of a fan, an electrical heating element and a nozzleThe power input to the fan is 50 J/s and the power input to the heating element is 1.44 kJ/s. The air enters the fan with negligible velocity at a pressure of 1 bar and a temperature of 20 C, the volumetric flow rate being 0.5 m3/min. After passing over the heating element, the air leaves the nozzle with a velocity of 25 m/s and a pressure of 1.1 bar. Treating the complete arrangement as a steady flow system and ignoring any heat loss from the system, determine: (a) The mass flow rate of air entering the fan in kg per second(b) The kinetic energy of the air leaving the nozzle per second(c) The change in enthalpy of the air occurring per second between entering the fan and leaving the nozzle(d) The temperature of the air as it leaves the nozzle.(e) The density of the air as it leaves the nozzle(f) The flow area at the nozzle exit.Take R = 0.287 kJ/kgK and cp = 1.005 kJ/kgK
Steam enters the nozzle operating a steady state pressure of 2.5 MPa and a temperature of 300 °C ( H1 = 3008.8 kJ/kg) and leaves at a pressure of 1.7 MPa with a velocity of 470 m/s. The rate of flow of steam through the nozzle is 1360 kg/hr. Neglecting the inlet velocity of the steam and considering the flow in the nozzle is adiabatic, find:a. the exit enthalpy in kJ/kg, ( H2)b. the nozzle exit area ( in cm) if V exit is 0.132 m^3 /kgc. the system
can you please solve this for me, thanks. 10 kg/s of steam (H2O) enters a turbine at 10 m/s and a specific enthalpy of 3500 kJ/kg and leaves at an outlet 10m below the inlet with a specific enthalpy of 2500 kJ/kg and a velocity of 20 m/s. Assume steady-state steady-flow. If the heat lost from the turbine is 20% that of the turbine work, determine a.) the turbine horsepower. If the turbine is coupled to a generator with a 90% electrical efficiency, and the turbine horsepower has an 80% mechanical efficiency, b.) how much income will a power plant generate in one year if the electrical energy is sold at PhP 3.51 per kW-hr? (Hint: Mechanical efficiency = actual turbine work / ideal turbine work. Electrical efficiency of a generator = electrical output / actual turbine work.)
Q5: A-Steam enters a turbine with a velocity of 50m/s and specific enthalpy 2690 kJ/kg . the steam leaves the turbine with a velocity of 25 m/s and specific enthalpy 1300 kJ/kg . the heat lost tothe surroundings as the steam passes through the turbine is 25 kJ/kg .the steam flow rate is 32400kg/h determine the work output from the turbine in kilowatts. B- 0.015 m° gas at a pressure of 4.070 Kpa expands to a pressure of 0.00207 bar according to the law pV'°=C -Determine a- the final volume b- the work heat transferred during the expansion. Take (the molecular weight of the gas =24 and specific heat at constant volume =0.866 kJ/kg .K) .
Steam enters a nozzle at a pressure of 7 bar and 200°C (i.e. initial enthalpy 2850 kJ/kg) and a pressure of 1.5 bar. The initial of steam at the leaves at entrances is 40 m/sec and exist velocity from the nozzle is 700 m/sec. The mass flow rate through the nozzle is 1400 kg/hr. The heat loss from the nozzle is 1105 kJ/hr. Determine the final enthalpy of steam and the nozzle area if the 3 specific volume is 1.24 m / kg.
In turbochargers a turbine is directly connected to a compressor. The power harvested by the turbine is used to power the compressor. In the figure below a turbine runs on steam and powers a compressor on air. Air can be considered a perfect gas with k = 1.34, R = 0.28 kJ/kgk and Cp 1.02 kJ/kgK. The air enters the compressor at p₁ 1bar, T₁ 300K and a mass flow rate of mdot = 5.9 kg/s and exits at p2 = 5.2 bars. The steam enters the isentropic turbine at P3 = 2 MPa, T3 = 320°C and exits at p4 = 100 kPa. = State 2 Isentropic Compressor State 1 Air-perfect gas T₁ = 300K P₁ = 1 bar W = ? tubine Answer: State 4 Isentropic Turbine State 3 Steam T, 320°C P3= 2MPa What is the enthalpy at state 3? Please enter your answer in kJ/kg =
Carbon dioxide gas is compressed at steady state from a pressure of 20 Ibf/in? and a temperature of 32°F to a pressure of 50 Ibf/in? and a temperature of 120°F. The gas enters the compressor with a velocity of 30 ft/s and exits with a velocity of 80 ft/s. The mass flow rate is 2500 Ib/hr. The magnitude of the heat transfer rate from the compressor to its surroundings is 5% of the compressor power input. Use the ideal gas model with cp = 0.21 Btu/lb.°R and neglect potential energy effects. Determine the flow area at the inlet, in ft2, and the power required by the compressor to work, in horsepower.
Moodle in the Cloud 0% In turbochargers a turbine is directly connected to a compressor. The power harvested by the turbine is used to power the compressor. In the figure below a turbine runs on steam and powers a compressor on air. Air can be considered a perfect gas with k = 1.34, R = 0.28 kJ/kgk and cp = 1.02 kJ/kgK. The air enters the compressor at p₁ 1bar, T₁ = 300K and a mass flow rate of mdot = 5.9 kg/s and exits at p2 = 5.2 bars. The steam enters the isentropic turbine at P3 = 2 MPa, T3 = 320°C and exits at p4 = 100 kPa. = State 2 Isentropic Compressor State 1 Air - perfect gas T₁ = 300K P₁= 1 bar Get Help Answer: W = ? tubine State 4 Isentropic Turbine State 3 Steam T,=320°C P3= 2MPa What is the power produced by the turbine? Please enter your answers in kW.
2. Air as ideal gas enters a compressor at inlet pressure 96 kPa, T₁ = 27C and volumetric flow rate is 26.91 m³/min and exits at 230 kPa and 127C. It is then cooled to 77C in heat exchanger which uses water with an inlet temperature at 25C and outlet temperature 40C. Determine (a) the compresor, in kW, and the mass flow rate of the cooling water, in kg/s (b) the rates of entropy production, each in kW/K, for the compressor and the heat exchanger.
A well-insulated turbine operating at steady state with a steam flow rate of 40 kg/s It produces MW of power. Water vapor enters the turbine at 360°C at a speed of 35 m/s. 0.06 from turbine bar pressure and 120 m/s velocity as saturated steam. Potential energy effects are neglected. is being done. Determine the inlet pressure in bar.