Question 3. During an archery competition, an arrow of mass 35.0 g is fired horizontally with a speed of 1.10 x 102 m/s at a target fixed to a wall. The arrow does not drop significantly during its flight. The arrow penetrates the target to a depth of 5.00 cm and is brought to a complete stop. The magnitude of the average force exerted by the target on the arrow, expressed in scientific notation, is a.bc x 104 N. The values of a, b, c, and d and are 3

Question 3. During an archery competition, an arrow of mass 35.0 g is fired horizontally with a speed of 1.10 x 102 m/s at a target fixed to a wall. The arrow does not drop significantly during its flight. The arrow penetrates the target to a depth of 5.00 cm and is brought to a complete stop. The magnitude of the average force exerted by the target on the arrow, expressed in scientific notation, is a.bc x 104 N. The values of a, b, c, and d and are 3

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter10: Systems Of Particles And Conservation Of Momentum

Section: Chapter Questions

Problem 59PQ

See similar textbooks

Similar questions

You hold a slingshot at arms length, pull the light elastic band back to your chin, and release it to launch a pebble horizontally with speed 200 cm/s. With the same procedure, you fire a bean with speed 600 cm/s. What is the ratio of the mass of the bean to the mass of the pebble? (a) 19 (b) 13 (c) 1 (d) 3 (e) 9
A cannon is rigidly attached to a carriage, which can move along horizontal rails but is connected to a post by a large spring, initially unstretchcd and with force constant k = 2.00 104 N/m, as shown in Figure P8.60. The cannon fires a 200-kg projectile at a velocity of 125 m/s directed 45.0 above the horizontal. (a) Assuming that the mass of the cannon and its carriage is 5 000 kg, find the recoil speed of the cannon. (b) Determine the maximum extension of the spring. (c) Find the maximum force the spring exerts on the carriage. (d) Consider the system consisting of the cannon, carriage, and projectile. Is the momentum of this system conserved during the firing? Why or why not?
There is a compressed spring between two laboratory carts of masses m1 = 105 g and m2 = 212 g. Initially, the carts are held at rest on a horizontal track (Fig. P10.40A). The carts are released, and the cart of mass m1 has velocity vi=2.035i m/s in the positive x direction (Fig. 10.40B). Assume rolling friction is negligible. a. What is the net external force on the two-cart system? b. Find the velocity of cart 2. FIGURE P10.40 Problems 40 and 41.
A model rocket engine has an average thrust of 5.26 N. It has an initial mass of 25.5 g, which includes fuel mass of 12.7 g. The duration of its burn is 1.90 s. (a) What is the average exhaust speed of the engine? (b) This engine is placed in a rocket body of mass 53.5 g. What is the final velocity of the rocket if it were to be fired from rest in outer space by an astronaut on a spacewalk? Assume the fuel burns at a constant rate.
A space probe, initially at rest, undergoes an internal mechanical malfunction and breaks into three pieces. One piece of mass ml = 48.0 kg travels in the positive x-direction at 12.0 m/s, and a second piece of mass m2 = 62.0 kg travels in the xy-plane at an angle of 105 at 15.0 m/s. The third piece has mass m3 = 112 kg. (a) Sketch a diagram of the situation, labeling the different masses and their velocities, (b) Write the general expression for conservation of momentum in the x- and y-directions in terms of m1, m2, m3, v1, v2 and v3 and the sines and cosines of the angles, taking to be the unknown angle, (c) Calculate the final x-components of the momenta of m1 and m2. (d) Calculate the final y-components of the momenta of m1 and m2. (e) Substitute the known momentum components into the general equations of momentum for the x- and y-directions, along with the known mass m3. (f) Solve the two momentum equations for v3 cos and v3 sin , respectively, and use the identity cos2 + sin2 = 1 to obtain v3. (g) Divide the equation for v3 sin by that for v3 cos to obtain tan , then obtain the angle by taking the inverse tangent of both sides, (h) In general, would three such pieces necessarily have to move in the same plane? Why?
NASAs Saturn V rockets that launched astronauts to the moon were powered by the strongest rocket engine ever developed, providing 6.77 106 N of thrust while burning fuel at a rate of 2.63 103 kg/s. Calculate the engines exhaust speed.
A 2000-kg railway freight car coasts at 4.4 m/s underneath a grain terminal, which dumps grain directly down into the freight car. If the speed of the loaded freight car must not go below 3.0 m/s, what is the maximum mass of grain that it can accept?
A rocket has total mass Mi = 360 kg, including Mfuel = 330 kg of fuel and oxidizer. In interstellar space, it starts from rest at the position x = 0, turns on its engine at time t = 0, and puts out exhaust with relative speed ve = 1 500 m/s at the constant rate k = 2.50 kg/s. The fuel will last for a burn time of Tb = Mfuel/k = 330 kg/(2.5 kg/s) = 132 s. (a) Show that during the burn the velocity of the rocket as a function of time is given by v(t)=veln(1ktMi) (b) Make a graph of the velocity of the rocket as a function of time for times running from 0 to 132 s. (c) Show that the acceleration of the rocket is a(t)=kveMikt (d) Graph the acceleration as a function of time. (c) Show that the position of the rocket is x(t)=ve(Mikt)ln(1ktMi)+vet (f) Graph the position during the burn as a function of time.
What exhaust speed is required to accelerate a rocket in deep space from 800 m/s to 1000 m/s in 5.0 s if the total rocket mass is 1200 kg and the rocket only has 50 kg of fuel left?
A tennis ball of mass 0.0591 kg is served. It strikes the ground with a velocity of 54.0 m/s (120 mi/h) at an angle of 22.0° below the horizontal. Just after the bounce it is moving at 53.0 m/s at an angle of 18.0° above the horizontal. a) If the interaction with the ground lasts 0.0620 s, what is the magnitude of the average force exerted by the ground on the ball?
A 748 g rubber ball was vertically pushed downward at 1.21 m/s from a height of 78.2 cm above a cemented floor. When the ball hits the floor, it comes into contact with the floor for 25.6x10-3s and then bounces to a height of 1.42 m. What is the magnitude of the average force imparted by the floor on the ball?
A 0.663-kg ball, initially moving with a speed of 3.09 m/s, bounces off a wall and then moves with a speed magnitude half of its original directed in the opposite direction. If the ball is in contact with the wall for 5.4 ms, what is the magnitude of the average force that the wall exerts on the ball? Express your answer in two decimal places, in Newtons.