QUESTION 2 Water flows through the horizontal branching pipe shown in Figure 3. Water discharges into the atmosphere at section (4). If viscous effects are negligible, a) determine the pressure at section (2). b) calculate the velocity at section (3). c) what is the x component of the anchoring force at the flange to hold the pipe in place? Draw the control volume and identify all forces. A2 = 0.007 m² V2 = 9 m/s (1) Flange 40° A1 = 0.1 m² V = 3 m/s→ P, = 69 kPa %3D A3 = 0.02 m² P3 = 55 kPa (3) A4 = 0.0095 m²- (4)

QUESTION 2 Water flows through the horizontal branching pipe shown in Figure 3. Water discharges into the atmosphere at section (4). If viscous effects are negligible, a) determine the pressure at section (2). b) calculate the velocity at section (3). c) what is the x component of the anchoring force at the flange to hold the pipe in place? Draw the control volume and identify all forces. A2 = 0.007 m² V2 = 9 m/s (1) Flange 40° A1 = 0.1 m² V = 3 m/s→ P, = 69 kPa %3D A3 = 0.02 m² P3 = 55 kPa (3) A4 = 0.0095 m²- (4)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Question 1: Water is expelled by a jet to the environment (i.e. the water flow is surrounded by atmospheric pressure). To change the direction of the water flow, this enters to a curved pipe as show in the figure (top view perspective). Calculate the forces exerted by the flow to the pipe in x and y direction (both horizontal). Use a water density of 1000 kg/m³, Q=1 m³/s, diameter d-0.3 m. Follow the 4 steps explained in the lectures and state your assumptions clearly. 30 Question 2: Repeat question 1 but change the curvature from 30 degrees to 90 degrees. How the forces change? 90
4. The velocity profile of a viscous liquid flowing over a fixed plate is given by v=0.68y-y² (v is the velocity in m/s and y is the distance from the plate in m). i. Calculate the shear stresses at the plate surface and 0.34 m away from the plate (u=0.9 Ns/m3). ii. Draw the velocity and the shear stress profile of the system. direction of flow plate
Question 4. The flowrate of the flow is 0,2 m³/s in a pipe placed on a horizontal plane. The pipe diameters are as 0.4 m and 0.2 m for D1 and D2, respectively. Find the 43 resultant force *(kN) acting to the pipe by the flow. The gauge pressure at (1) is P1=200 kN/m². (1) Figure 4
A horizontal water pipe is reduced in size from 18 inches in diameter from point A to 6 inches in diameter to point B. The flow in the pipe is 10 cubic feet per second, and the pressure in A is 20 psi (gage). If it is assumed that there is no less energy due to friction, what is the pressure at B
4. FLUID FLOW 1. The figure below shows a water tank with piping system for a small manufacturing plant. If water flows through the system ((A) at 40 L/s, what would be the pressure at point B? The water has a density of 998 kg per cubic meter and viscosity of 0.8 centipoise. measures 0.04089 m and 0.04826 m in inside and outside diameter, respectively. The tank is exposed to the atmosphere The 1.5 inches (nominal) wrought iron pipe Given: Q= 40L/s = 0.040 m/s p= 998 kg/m H=0.8 centipoise 0.001P-s = 0.08 P-S Reg'd: Pressure at B. = ? 1 cp i.d. = 0.04089 m o.d. = 0.04826 m length of pipe = 110 m
Q4: Answer A or B A-Ethyl alcohol flows in the pipe as shown in Figure below of specific weight 49 Ib/ft'. What is the mass flow rate? If viscous effects are neglected. Take the specific weight for mercury equal to 846 and for water equal to 0 62.4 at 68° F. Mercury
= Q2: As shown in figure (2), when the water jet of diameter 25mm and Vj 30 m/sec., determine the force (P) should be applied in order to keep the plate vertical. Figure (2) 37 hinge P 150 mm 100 mm
The water of a 14’ × 48’ metal frame pool can drain from the pool through an opening at the side of the pool. The opening is about h = 1.05 m below the water level. The capacity of the pool is V = 3740 gallons, the pool can be drained in t = 10.2 mins. P0 is the pressure of the atmosphere. ρ is the density of the water. a. Write the Bernoulli’s equation of the water at the top of the pool in terms of P0, ρ, h. Assuming the opening is the origin. b. Write the Bernoulli’s equation of the water at the opening of the pool in terms of P0, ρ, h and v, where v is the speed at which the water leaves the opening. Assuming the opening is the origin. c. Express v2 in terms of g and h. d. Calculate the numerical value of v in meters per second. e. Express the flow rate of the water in terms of V and t. f. Express the cross-sectional area of the opening, A, in terms of V, v and t. g. Calculate the numerical value of A in cm2
A brand of toothpaste is made using a mixture of white and red paste. During the manufacturing process, both pastes are pumped through a pipe, with the red paste lying in the center of the pipe, as shown in Figure Q2. The pipe has an internal radius, R2, and the segment of red paste has a radius R1. The flow is found to follow the Poiseuille equation, i.e. 1 dp u(r) = -- 4µdx (R²2-²) Where u is the viscosity of the paste and dp dx is the pressure gradient. The total flow of toothpaste through the pipe is Qtot, and the flowrate of the red paste is Qred. The toothpaste has a density of p = 1200 kg/m3, and a viscosity of 0.03 Pa.s. The pipe has a radius R2 = 5 cm and a length L = 2 m. a) Find an expression for the flowrate of the red toothpaste. You answer should be in terms of µ, R1, R2, dp dx) b) The flow in the pipe becomes turbulent when the Reynolds number reaches 2000 (where Re is calculated using the mean velocity across the pipe). What is the maximum pressure drop along the pipe…
A pressurized tank of water is used to create a fountain, as illustrated. Assume that the water's free surface area in the tank is very large relative to the pipe's cross-sectional area, which is circu- lar with diameter d 1.0 cm. The small pipe bend has height = 10.0 cm. At the instant when 0.75 m, H = 2.5 m, and the gauge measures a pressure of Pgauge 20.0 kPa, the water spray reaches a height L above the pipe exit. h = = = Neglecting viscous effects, determine the height of the spray, L.
Question 4 du Water flows past a flat plate that has a length L 5 m and a width w = 2 m, as shown in Figure Q4. The shear stress at the wall is given by Tw = μ When the flow is laminar the shear stress at the wall is given by the equation: dy Tw = 0.0644 PU ². X Where p = 1000 kg/m³ is the water density and U.. = 5 m/s is the velocity of the water. The height of the boundary layer is 8, and can be approximated by 8(x) = 5 μx pU.. The viscosity of water is μ = 1 mPa.s. a) Estimate the drag force on the plate. You may use the expression F₁ = S twdA b) When the flow becomes turbulent, we can approximate the velocity gradient at the wall as constant, A. If the total drag force is 300 N, find A. du = ду c) When the fluid is heated to 90°C, the density drops slightly and the viscosity decreases a lot, and engineers observe that the equation, Tw 0.0644pU/ becomes less accurate. Explain why this might occur (1-2 sentences). = d) In order to visually examine a turbulent boundary layer,…
The plunger diameter of a single-acting reciprocating pump is 115 mm and the stroke is 230 mm. The suction pipe is 90 mm in diameter and 4.2 m long. If cavitation takes place at the suction head of 4 m, the barometer stands at 10.3 m of water, and the water level in the sump is 3 m below the pump cylinder axis.1. Find the maximum allowable speed to operate the pump