i need the answer quickly Q.3 A Carnot cycle heat pumprefrigerant. Thc condenser and evaporator tempcraturcs are 50°C and10°C respectively. The refrigerant flow rate is 0.3 kgs"!. Calculate (i) therate of heat input to the heat pump, (ii) the net work input, and (iii) theCOP of the heat pump.[Answers: (i) 40 kW, (ii) 5.64 kW, (iii) 8.075]operates with R134a as the

GivenHeat pump working on carnot cyclerefrigerent R134aTc=50oC=323KTe=10oC=283Km=0.3kg/s

Q.3 A Carnot cycle heat pump operates with R134a as the refrigerant. The condenser and evaporator temperatures are 50°C and 10°C respectively. The refrigerant flow rate is 0.3 kgs¹. Calculate (i) the rate of heat input to the heat pump, (ii) the net work input, and (iii) the COP of the heat pump. [Answers: (i) 40 kW, (ii) 5.64 kW, (iii) 8.075]

Q.3 A Carnot cycle heat pump operates with R134a as the refrigerant. The condenser and evaporator temperatures are 50°C and 10°C respectively. The refrigerant flow rate is 0.3 kgs¹. Calculate (i) the rate of heat input to the heat pump, (ii) the net work input, and (iii) the COP of the heat pump. [Answers: (i) 40 kW, (ii) 5.64 kW, (iii) 8.075]

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter44: Geothermal Heat Pumps

Section: Chapter Questions

Problem 13RQ: If 14 gpm of water is flowing through an open-loop heat pump with a temperature difference of 7F,...

See similar textbooks

Similar questions

Refrigerators currently being manufactured in the United States are using______as their refrigerant.
A standard vapor-compression refrigeration system produces 20 tons of refrigeration using R 12 as a refrigerant while operating between a condenser temperature of 40°C and an evaporator temperature of -25°C. Determine the following: a. refrigerating effect in kilojoules per kilogram, b. the circulating rate of R 12 in kilograms per second, c. the power required, the COP, d. the heat rejected in kilowatts, and e. the volume flow rate of refrigerant at compressor inlet conditions. HA 40°C -25°C Entropy s Temperature T
1st Step: Evaluate the performance of the Refrigerator 1.Refrigerator 1 operates as a reverse Carnot cycle using R-717 as the refrigerant at aflow of 1.8 kg/s. The condensing and evaporating temperatures are 25 °C and -5 °C, respectively.To evaluate the performance of Chiller 1, you must determine the following performance parameters:project:a) Rate of heat elimination in the condenser (Q );b) The power of the compressor;c) The COP of the cycle.For the energy balance, make the following considerations:- Permanent regime;- Variation of kinetic energy and potentials are negligible;- Compressor and turbine operate adiabatically;- Evaporation and condensation steps do not involve work. Please, make it typeable, written in virtual text, do not do it by hand and do not take a photo, it interferes with the understanding of the lyrics.
(b) Determine the cooling load (q₁), heat rejection (q) and actual compressor work input (w) per unit mass in kJ/kg. . C. (c) Calculate the coefficient of performance (COP) of this actual refrigeration cycle and compare it with the COP of a reversed Carnot cycle for refrigeration if used under the same inside and outside amblent temperatures.
The refrigeration system of a food production firm is run using the Reversed Carnot Cycle. The temperature of the hot refrigerant supply in the system should be 52°C, while the temperature of the sink should be -14°C. Its capacity is projected to be at least 24 tons. It's important not to disregard losses. Find and Show unit analysis and conversion: a. COP and COP of Heat Pump b. Heat rejected from the system in kW c. Network in, Hp and Energy Efficiency Ratio
Refrigerant 134a is used in a cooling system operating according to the ideal cooling cycle with vapor compression for cooling the cold storage in the milk processing plant. The flow rate of the refrigerant is 0.10 kg/s. The condenser and evaporator pressures are 1000 kPa and 600 kPa, respectively. a) Calculate the cooling capacity as (kW). b) Calculate the volumetric flow rate of the refrigerant at the compressor inlet. c) Calculate the efficiency coefficient of the cooling system.
3.5 An ammonia refrigeration system operates between saturated suction temperature of -20°C, and saturated discharge temperature of +40°C. Com- pare the COP of the cycle using wet compression with that of the cycle using dry compression. Assume that the vapour leaving the compressor is saturated in the case of wet compression, and the vapour entering the compressor is saturated in the case of dry compression. The refrigerant leaves the condenser as saturated liquid.
an ammonia refriferation cycle operates at 12C suction temperature and 300 kpa condensing pressure, refrigeration capacity 30 kw, compressor clearance 6%, compressor eff 80% mechanical efficiency 75%, actual volumetric eff 74%. determine? (a) clearance volumetric eff. (b) ideal cop (c) actual cop (d) mass low rate of ammonia (e) brake work
Q1:- In a R-134A based refrigeration system, a liquid-to-suction heat exchanger (LSHX) with an effectiveness of o.713 is used. The evaporating and condensing pressures are 1.4 bar and 6 bar respectively. Assuming the compression process to be isentropic, find: a) Volumetric refrigeration effect. b) COP of the system. c) Maximum temperature in the system
A refrigerator like the one shown in the figure uses refrigerant 134a as the working fluid and operates in a vapor compression refrigeration cycle with an evaporator temperature of -4ºF and a condenser pressure of 130 Psia, the adiabatic efficiency of the compressor being 90%. The mass flow of the refrigerant is 6.5 lb / min. Calculate: a) the real power supplied to the compressor, in hp b) Refrigeration capacity in Ton, c) the COP
6. An auditorium is to be maintained at a temperature of 26°C & 50% RH, Air is to be supplied at a temperature not lower than 15°C. The sensible heat gain is llokw and the latent heat gain is 37.5 kw, Take venti- lating air as 25% by weight of the air from the room, and is at 35°C & 60% RH. Determine the refrigeration capacity in TR
1. In a steam power cycle, steam enters the turbine at 30bar with the following different conditions and leaves at 1bar. Calculate Carnot efficiency, Rankine efficiency, condenser heat flow in kW assuming mass flow rate of steam as 9.5kg/s and steam rate for each case considering the pump work. (ii)Wet with 0.95 dryness (iii) Superheat at 550°C