Problem 1: A new freeway is being designed through a rural area. The directional design hour volume will be composed of the following 15-min flows: 650, 794, 656, 600 vehicles. The number of trucks and buses in the traffic stream are 250 and 155 respectively – with 0 recreational buses. In average, every 2 miles it will have an exiting/entering ram (or every 1.25 kilometers). This freeway section will have level terrain characteristics. Question: If the objective is to provide level of service C, how many lanes must be provided?

Problem 1: A new freeway is being designed through a rural area. The directional design hour volume will be composed of the following 15-min flows: 650, 794, 656, 600 vehicles. The number of trucks and buses in the traffic stream are 250 and 155 respectively – with 0 recreational buses. In average, every 2 miles it will have an exiting/entering ram (or every 1.25 kilometers). This freeway section will have level terrain characteristics. Question: If the objective is to provide level of service C, how many lanes must be provided?

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A 4-lane new urban freeway is suggested to be designed with the following data: F.ADT = 30000 vpd, design hour factor= 0.11 and directional split = 60%. Rolling terrain, 12% trucks, 3% buses, 6% Rvs, PHF is 0.92 and all traffic are commuters. Then based on the HCM 2000 procedure, the equivalent passenger-car hourly flow rate is about 2280 .a 1385 .b 1115 .C None .d 1650 .e
A 6-lane new urban freeway is suggested to be designed with the following data: F.ADT = 45000 vpd, design hour factor= 0.12 and directional split = 65%. Rolling terrain, 10% trucks, 5% buses, 6% Rvs, PHF is 0.91 and all traffic are commuters. Then based on the HCM 2000 procedure, the equivalent passenger-car hourly flow rate is about ..... .... ..... .. а. 1410 b. 2105 O C. none d. 1650 е. 1255
A new section of a freeway is to be designed with a free-flow-speed of 65 mph along of 0.75 mile on 5% upgrade. The expected traffic volume is 4200 v/hr. The traffic composition is 15% trucks, 5% recreational vehicles, and 10% buses. The peak hourly factor is 0.9, the unfamiliar driver factor is 0.95. If the design requirement is to target a level of service (B), how many lanes must be provided to satisfy the design requirement?
A 6-lane urban freeway is suggested to be designed with the following data: F.ADT = 45000 vpd, design hour factor= 0.12 and directional split = 65%. Rolling terrain, 10% trucks, 5% buses, 6% Rvs, PHF is 0.91 and all traffic are commuters. Then based on the HCM 2000 procedure, the equivalent passenger- car hourly flow rate is about
A segment of rural freeway is being designed for a FFS of 70 mph through rolling terrain. The directional (i.e. one-way) design volume is 3,000 vehicles per hour. If 10% of the design volume is expected to be heavy vehicles (i.e. trucks and buses), what is the heavy vehicle adjustment used to determine the flow rate? Provide you answer to the nearest hundredths.
A basic segment of a rural freeway has the following characteristics: • Four-lanes (two lanes in each direction)%3B There is one ramp within 3 miles upstream, and 2 ramps within 3 miles downstream; 10-ft lanes; Right shoulder width of 4 ft; • Level terrain;. 10% trucks and 5% buses in the vehicle stream. Calculate the FFS at this freeway section and then determine the level of service (LOS) when the flow rate is 1740 pc/h/In. (Write the answer for the LOS in the box below).
A section of four lane (two lanes in each direction) freeway in mountainous terrain, which is 2.5 mi long, is to be improved to carry on a regular weekday a heavy volume of 3000 veh/h, consisting of 80% passenger cars, 15% trucks, 3% buses, and 2% recreational vehicles. The PHF is 0.90. Determine the additional number of 12-ft lanes required in each direction if the road is to operate at LOS B. The base FFS is 65mph, there is a lateral obstruction 4ft from the pavement on the right side of the road, and interchange spacing is 2 mi. Driver population adjustment factor fp= 1.0.
A six-lane freeway (three lanes in each direction in mountainous terrain has 10-ft lanes and obstructions 1ft from the right edge. There are five ramps within three miles upstream of the segment midpoint and four ramps within three miles downstream of the segment midpoint. The traffic stream consists of mostly commuter with a peak hour factor of 0.84, peak-hour volume of 2500 vehicles, and 4% recreational vehicles. What is the level of service?
You are designing a freeway as a passenger-car only facility, and with ideal roadway characteristics. It is estimated that the freeway will have a traffic demand of 75,000 vehicles per day, a free-flow speed of 70 mi/h, a traffic stream of primarily commuters, a peak-hour factor of 0.88, and a directional distribution of 0.65. Determine the number of lanes (both directions) required to provide at least LOS C using the 40th highest annual hourly volume (K = 0.116).
If Vf = 2327 VPH with 9% trucks, VR1 = 653 VPH with 5% trucks, and VR2 = 594 VPH with 8% trucks, what is the passenger car equivalents (Vpcph) of the onramp? Assume that the roadway is urban.
A rural freeway has an ideal free-flow speed of 120 km/hr and two-lanes 3.6 m in each direction, with right shoulder lateral clearance of 1.2 m. Interchange are spaced approximately 5 km apart. Traffic consists of 10% trucks & buses and 8% recreational vehs. If the maximum 15-min flow rate is 1760 veh/hr, what is the level of service on a 1.7 km long 3.1% upgrade?
You are designing a freeway as a passenger-car only facility, and with ideal roadway characteristics. It is estimated that the freeway will have a traffic demand of 75,000 vehicles per day, a free-flow speed of 70 mi/h, a traffic stream of primarily commuters, a peak-hour factor of 0.88, and a directional distribution of 0.65. Determine the number of lanes (both directions) required to provide at least LOS D using the 30th highest annual hourly volume (K30 = 0.12). The answer is a/an -lane freeway.