Learning Goal: To determine an l-beam's maximum bending moment, moment of inertia using the parallel-axis theorem, and the maximum stress at a given location using the flexure formula As shown, I-beam ABC supports a sign having a mass of S= 11 kg The l-beam is 740 mm long and is further supported by a rod that is attached 420 mm from the wall. Assume that all forces acting on the I-beam act along its centroid and that the l-beam's weight is negligible. Let the dimensions of the l-beam be w = 90 mm g= 25 mm, h = 70 mm j= 25 mm, c= 110 mm la B D. Part A - Free-body diagram of beam ABC Before the problem can be analyzed, a free-body diagram must be drawn to understand the forces and reactions that act on the -bam. Drew the free-bady diagram of beam ABC. A free-body diagram includes the forces acting on the object, in this case the beam. Start your vectors at the black dots. You will not be graded on vector length. Ignore all reaction forces in the x direction, and assume all vertical reaction forces point upward. > View Available Hint(s) No elements selected L. Select the elements from the list and add them to the canvas setting the appropriate attrioutes.

Learning Goal: To determine an l-beam's maximum bending moment, moment of inertia using the parallel-axis theorem, and the maximum stress at a given location using the flexure formula As shown, I-beam ABC supports a sign having a mass of S= 11 kg The l-beam is 740 mm long and is further supported by a rod that is attached 420 mm from the wall. Assume that all forces acting on the I-beam act along its centroid and that the l-beam's weight is negligible. Let the dimensions of the l-beam be w = 90 mm g= 25 mm, h = 70 mm j= 25 mm, c= 110 mm la B D. Part A - Free-body diagram of beam ABC Before the problem can be analyzed, a free-body diagram must be drawn to understand the forces and reactions that act on the -bam. Drew the free-bady diagram of beam ABC. A free-body diagram includes the forces acting on the object, in this case the beam. Start your vectors at the black dots. You will not be graded on vector length. Ignore all reaction forces in the x direction, and assume all vertical reaction forces point upward. > View Available Hint(s) No elements selected L. Select the elements from the list and add them to the canvas setting the appropriate attrioutes.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

tate of Stress Caused by Combined Loadings Learning Goal: To use the superposition principle to find the state of stress on a beam under multiple loadings. The beam shown below is subjected to a horizontal force P via the rope wound around the pulley. The state of stress at point A is to be determined. 100 mm 15 mm 20 mm 200 mm 150 mm f 20 mm The dimensions are di - 2.15 m. d₂ = 0.5 m. -0.85 m d-285 mm and r= 150 mm The applied force has magnitude P=4.5 kN Part A-Support Reactions and Internal Loading C₁, C₂=₁ N=, V = ₁ M = Determine the support reactions C, and C, and the internal normal force, shear force, and moment on the cross-section containing point A. Express your answers, separated by commas, to three significant figures. ► View Available Hint(s) Submit Part B- Properties of the Cross-Section A= I= Q = Submit VAX IT VOC JA=.TA= What are the cross-sectional area, moment of inertia with respect to the neutral axis, and first moment of the area with respect to point A for the…
EXAMPLE 4.2 The rigid bar BDE is supported by two links AB and CD. Link AB is made of aluminum (E = 70 GPa) and has a cross-sectional area of 500 mm²; link CD is made of steel (E = 200 GPa) and has a cross-sectional area of 600 mm?. For the 30-kN force shown, determine the deflection (a) of B, (b) of D, (c) of E. %3D 0.4 m 0.3 m 30 kN D E -0.4 m 0.2 m
A symmetrical beam of length 300 mm is loaded with a force of 414 N downwards (positive z) and has the following equation for the vertical displacement: w (2) = - + F 48 %3D The value of E is 200,000 Nmm² and the values of ly is 20 x 10° mm“ The maximum value of z for the beam cross section is +20 mm What is the maximum tensile stress in the beam at the point when x = 86 mm?
Derive a formula for the strain energy U of the cantilever bar shown in the figure. The bar has circular cross sections and length R. It is subjected to a distributed torque of intensity z per unit distance. The intensity varies linearly from z = 0 at the free end to a maximum value z = zo at the support. Express your answer in terms of maximum value zo , length R, shear modulus G and polar moment of inertia Ip . U =
Figure Q2(a) shows a cantilever beam that is subjected to a pure bending moment M = 3kN.m about the neutral axis (N.A) and the cross-section of a beam is shown in Figure Q2(b). Determine: (a) The moment of inertia about the neutral axis, InA. (b) The bending stress acting at point B and state whether it is in tension or compression. (c) The bending stress acting at point C (d) The maximum bending stress in the beam. M Figure Q2 (a) 20 mm B 150 mm C N 20 mm 150 mm 20 mm 250 mm Figure Q2 (b)
B.2. Elementary beam theory predicts that the axial bending stress ox in a prismatic beam is given by: σ, X (M.1, M,1,)y+ (M, I. - M.1,-) z (1,1.-1²-) where My and M₂ are bending moments applied to a cross-section, and where ly, Iz and lyz are second moments of area in the usual notation (Oxyz is a Cartesian coordinate system in which the x axis corresponds to the centroidal axis of the beam). (i) What assumptions have been made in the derivation of the above expression? (ii) Indicate by means of a sketch the directions in which positive values of the bending moments My and M₂ act on a cut plane facing in the positive x direction.
The beam shown below is suspended from two steel rods as shown and is initially horizontal. The midpoint B of the beam is deflected 15 mm downward by force Q. The steel used for the rods has properties E = 200 GPa and σ = 275 MPa, determinea. the required maximum value of Q.b. the deformation of rod AD.c. the deformation of rod CE.
A truss is subjected to different force combinations as shown in the figure below. The cross-sectional area of each member is shown in the figure, and the Young's coefficient of the member is 200 GPa (1×109 N/m2):(a) Find the horizontal deformation (including direction) of point C.(b) Find the vertical deformation (including direction) of point C.(c) If the temperature of the rod AD increases uniformly by 60 degrees due to the relationship with the wall, and the temperature coefficient of the rod is known to be 12×10-6/°C, try to find the vertical deformation of point C again (including direction).
A simply supported beam of length L is subjected to a varying distributed load sin (3x/L) Nm-¹, where the distance x is measured from the left support. The magnitude of the vertical reaction force in N at the left support is
A simple beam is subjected to two concentrated loads as shown. The beam section is a rectangular one, A = b×h and k = 1.2.Parameters G, E, I, M, V, and A. Please find a. The strain energy (ub and us) of the deformed beam under the applied loads. The strain energy ub due to bending and another one us due to shear. b.The deflection at mid-span due to bending and shear.
Below presents a continuous beam with A being fixed and B is pinned and C has a roller. Take: E = 200 GPa 1 = 8 x 106mm Load = 2 kN A 5m B Using the following method: 2 KN + 2m + 2m |- You are tasked to analyze the continuous beam by calculating the: > the displacement on the beam at B and C and > the reaction at the supports Matrix Structural Analysis Use the following steps as a guide to analyze the beam: Matrix Structural Analysis ✓ Produce Notations ✓ Establish the known displacements and known external load ✓ Produce Member Stiffness Matrix ✓ Displacement and Load ✓ Calculating the displacement Calculating the reaction at the support
Q.3) The Figure shown a beam with all dimensions. (a) Determine the bending stress at point H. 180 mm State whether the normal stress at H is tension or 12 mm compression. If the bending stress at point K is 9.0 MPa (Т). (b) Determine the magnitude of the maximum bending moment M: that can be supported by the beam. If the allowable bend 20 mm| 30 mm 260 mm stress is 165 MPa.